|
|
微合金化元素La对亚共晶Al-Si合金凝固组织与力学性能的影响 |
郑秋菊1,2, 叶中飞3, 江鸿翔1, 卢明3, 张丽丽1, 赵九洲1,2( ) |
1.中国科学院 金属研究所 沈阳 110016 2.中国科学技术大学 材料科学与工程学院 沈阳 110016 3.国网河南省电力公司 电力科学研究院 郑州 450052 |
|
Effect of Micro-Alloying Element La on Solidification Microstructure and Mechanical Properties of Hypoeutectic Al-Si Alloys |
ZHENG Qiuju1,2, YE Zhongfei3, JIANG Hongxiang1, LU Ming3, ZHANG Lili1, ZHAO Jiuzhou1,2( ) |
1.Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China 2.School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China 3.Electric Power Research Institute of State Grid Henan Electric Power Company, Zhengzhou 450052, China |
引用本文:
郑秋菊, 叶中飞, 江鸿翔, 卢明, 张丽丽, 赵九洲. 微合金化元素La对亚共晶Al-Si合金凝固组织与力学性能的影响[J]. 金属学报, 2021, 57(1): 103-110.
Qiuju ZHENG,
Zhongfei YE,
Hongxiang JIANG,
Ming LU,
Lili ZHANG,
Jiuzhou ZHAO.
Effect of Micro-Alloying Element La on Solidification Microstructure and Mechanical Properties of Hypoeutectic Al-Si Alloys[J]. Acta Metall Sin, 2021, 57(1): 103-110.
1 |
Zhao Z H, Xu Z, Wang G S, et al. Microstructure and property of welding joint weld with micro-Alloying 4043 welding wire [J]. Acta Metall. Sin., 2013, 49: 946
|
1 |
赵志浩, 徐 振, 王高松等. 微合金化4043铝合金焊丝焊接接头的组织与性能 [J]. 金属学报, 2013, 49: 946
|
2 |
Hegde S, Prabhu K N. Modification of eutectic silicon in Al-Si alloys [J]. J. Mater. Sci., 2008, 43: 3009
|
3 |
Guan R G, Tie D. A review on grain refinement of aluminum alloys: Progresses, challenges and prospects [J]. Acta Metall. Sin. (Engl. Lett.), 2017, 30: 409
|
4 |
Hosch T, Napolitano R E. The effect of the flake to fiber transition in silicon morphology on the tensile properties of Al-Si eutectic alloys [J]. Mater. Sci. Eng., 2010, A528: 226
|
5 |
Chen Z N, Kang H J, Fan G H, et al. Grain refinement of hypoeutectic Al-Si alloys with B [J]. Acta Mater., 2016, 120: 168
|
6 |
Timpel M, Wanderka N, Schlesiger R, et al. The role of strontium in modifying aluminium-silicon alloys [J]. Acta Mater., 2012, 60: 3920
|
7 |
Bolzoni L, Xia M X, Babu N H. Formation of equiaxed crystal structures in directionally solidified Al-Si alloys using Nb-based heterogeneous nuclei [J]. Sci. Rep., 2016, 6: 39554
|
8 |
Triveño Rios C, Peres M M, Bolfarini C, et al. Microstructure and mechanical properties of Al-Si-Mg ribbons [J]. J. Alloys Compd., 2010, 495: 386
|
9 |
Dang B, Zhang X, Chen Y Z, et al. Breaking through the strength-ductility trade-off dilemma in an Al-Si-based casting alloy [J]. Sci. Rep., 2016, 6: 30874
|
10 |
Zhang Z T, Li J, Yue H Y, et al. Microstructure evolution of A356 alloy under compound field [J]. J. Alloys Compd., 2009, 484: 458
|
11 |
Wang J Y, Wang B J, Huang L F. Structural evolution of Al-8%Si hypoeutectic alloy by ultrasonic processing [J]. J. Mater. Sci. Technol., 2017, 33: 1235
|
12 |
Liu Z, Xu L N, Yu Z F, et al. Research on the morphology and fractaldimension of primary phase in semisolid A356-La aluminum alloy by electro-magnetic stirring [J]. Acta Metall. Sin., 2016, 52: 698
|
12 |
刘 政, 徐丽娜, 余昭福等. 电磁场作用下半固态A356-La铝合金初生相形貌及分形维数的研究 [J]. 金属学报, 2016, 52: 698
|
13 |
Lu L, Dahle A K. Effects of combined additions of Sr and AlTiB grain refiners in hypoeutectic Al-Si foundry alloys [J]. Mater. Sci. Eng., 2006, A435-436: 288
|
14 |
Tan P, Yang Y, Sui Y D, et al. The influence of Al-10Sr or/ and Al-5Ti-1B on microstructure and mechanical properties of Al-12Si-4Cu-2Ni-0.8 Mg alloys [J]. J. Alloys Compd., 2019, 809: 151856
|
15 |
Timelli G, Caliari D, Rakhmonov J. Influence of process parameters and Sr addition on the microstructure and casting defects of LPDC A356 alloy for engine blocks [J]. J. Mater. Sci. Technol., 2016, 32: 515
|
16 |
Kairy S K, Rouxel B, Dumbre J, et al. Simultaneous improvement in corrosion resistance and hardness of a model 2xxx series Al-Cu alloy with the microstructural variation caused by Sc and Zr additions [J]. Corros. Sci., 2019, 158: 108095
|
17 |
Li J H, Wang X D, Ludwig T H, et al. Modification of eutectic Si in Al-Si alloys with Eu addition [J]. Acta Mater., 2015, 84: 153
|
18 |
Tsai Y C, Chou C Y, Lee S L, et al. Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys [J]. J. Alloys Compd., 2009, 487: 157
|
19 |
Zheng Q J, Zhang L L, Jiang H X, et al. Effect mechanisms of micro-alloying element La on microstructure and mechanical properties of hypoeutectic Al-Si alloys [J]. J. Mater. Sci. Technol., 2020, 47: 142
|
20 |
Pourbahari B, Emamy M. Effects of La intermetallics on the structure and tensile properties of thin section gravity die-cast A357 Al alloy [J]. Mater. Des., 2016, 94: 111
|
21 |
Quested T E, Dinsdale A T, Greer A L. Thermodynamic modelling of growth-restriction effects in aluminium alloys [J]. Acta Mater., 2005, 53: 1323
|
22 |
Quested T E, Greer A L. Grain refinement of Al alloys: Mechanisms determining as-cast grain size in directional solidification [J]. Acta Mater., 2005, 53: 4643
|
23 |
Takeuchi A, Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element [J]. Mater. Trans, 2005, 46: 2817
|
24 |
Zhou S H, Napolitano R E. Phase equilibria and thermodynamic limits for partitionless crystallization in the Al-La binary system [J]. Acta Mater., 2006, 54: 831
|
25 |
Li S B, Du W B, Wang X D, et al. Effect of Zr addition on the grain refinement mechanism of Mg-Gd-Er alloys [J]. Acta Metall. Sin., 2018, 54: 911
|
25 |
李淑波, 杜文博, 王旭东等. Zr对Mg-Gd-Er合金晶粒细化机理的影响 [J]. 金属学报, 2018, 54: 911
|
26 |
Barrirero J, Pauly C, Engstler M, et al. Eutectic modification by ternary compound cluster formation in Al-Si alloys [J]. Sci. Rep., 2019, 9: 5506
|
27 |
Lu S Z, Hellawell A. The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning [J]. Metall. Trans., 1987, 18A: 1721
|
28 |
Sui Y D, Wang Q D, Wang G L, et al. Effects of Sr content on the microstructure and mechanical properties of cast Al-12Si-4Cu-2Ni-0.8Mg alloys [J]. J. Alloys Compd., 2015, 622: 572
|
29 |
Rao J S, Zhang J, Liu R X, et al. Modification of eutectic Si and the microstructure in an Al-7Si alloy with barium addition [J]. Mater. Sci. Eng., 2018, A728: 72
|
30 |
Samuel E, Golbahar B, Samuel A M, et al. Effect of grain refiner on the tensile and impact properties of Al-Si-Mg cast alloys [J]. Mater. Des., 2014, 56: 468
|
31 |
Ma S M, Wang X M. Mechanical properties and fracture of in-situ Al3Ti particulate reinforced A356 composites [J]. Mater. Sci. Eng., 2019, A754: 46
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|