Please wait a minute...
金属学报  2011, Vol. 47 Issue (10): 1246-1250    DOI: 10.3724/SP.J.1037.2011.00142
  论文 本期目录 | 过刊浏览 |
<001>和<011>取向DD407单晶高温合金枝晶间距和微观偏析
杨初斌,刘林,赵新宝,刘刚,张军,傅恒志
西北工业大学凝固技术国家重点实验室, 西安 710072
DENDRITE ARM SPACINGS AND MICROSEGREGATIONS IN <001>  AND <011> ORIENTATED SINGLE CRYSTAL SUPERALLOYS DD407
YANG Chubin, LIU Lin, ZHAO Xinbao, LIU Gang, ZHANG Jun, FU Hengzhi
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072
全文: PDF(764 KB)  
摘要: 采用液态金属冷却(LMC)高温度梯度定向凝固炉制备<001>和<011>取向的DD407单晶高温合金, 研究了晶体取向对枝晶间距和微观偏析的影响. 结果表明, 晶体取向对单晶高温合金的枝晶间距和微观偏析有明显的影响. 枝晶间距随着<001>取向偏差角的增加而增加,但随<011>取向偏差角的增加而减小,且<011>取向的枝晶间距因为侧枝的分枝而明显大于<001>取向. 成分分析表明, 在不同取向的单晶中, Al,Ti和Ta富集于枝晶间, 是正偏析元素, 而W严重富集于枝晶干, 为负偏析元素,当<011>取向平行轴向时元素的偏析程度最轻.
关键词 晶体取向 镍基单晶高温合金 枝晶间距 微观偏析 定向凝固    
Abstract:Single crystal superalloys DD407 with <001> and <011> orientations were produced with seeding technique by using the liquid metal cooling Bridgman furnace. The dendrite arm spacings (DAS) and microsegregations in the single crystal superalloys with <001> and <011> orientations were investigated. The results indicated that increasing the deviation angle from <001> orientation or decreasing the deviation angle from <011> would increase the dendrite arm spacing. In addition, DAS of single crystal grown along <011> orientation is obviously greater than that of <001> orientation for side–branching. EMPA results showed that the positive segregation elements Al, Ti and Ta enriched in the interdendritic region, and the negative segregation element W enriched in the dendrite core. The microsegregation in the single crystal with <011> orientation paralleled to the sample axis is the lightest. It is found that not only the DAS but the mechanism of dendrite evolution and arrayed pattern of dendrite affect the degree of microsegregation.
Key wordscrystallographic orientation    Ni–based single crystal superalloy    dendrite arm spacing    microsegregation    directional solidification
收稿日期: 2011-03-18     
基金资助:

国家自然科学基金项目50931004 和 50827102, 国家重点基础研究发展计划项目2010CB631202和2011CB610406以及凝固技术国家重点实验室研究基金项目09-BZ-2010和57-TZ-2011资助

通讯作者: 刘林     E-mail: cby831012@yahoo.cn
Corresponding author: LIU Lin     E-mail: cby831012@yahoo.cn
作者简介: 杨初斌, 男, 1982年生, 博士生

引用本文:

杨初斌 刘林 赵新宝 刘刚 张军 傅恒志. <001>和<011>取向DD407单晶高温合金枝晶间距和微观偏析[J]. 金属学报, 2011, 47(10): 1246-1250.
YANG Chu-Bin, LIU Lin, DIAO Xin-Bao, LIU Gang, ZHANG Jun, FU Heng-Zhi. DENDRITE ARM SPACINGS AND MICROSEGREGATIONS IN <001>  AND <011> ORIENTATED SINGLE CRYSTAL SUPERALLOYS DD407. Acta Metall Sin, 2011, 47(10): 1246-1250.

链接本文:

https://www.ams.org.cn/CN/10.3724/SP.J.1037.2011.00142      或      https://www.ams.org.cn/CN/Y2011/V47/I10/1246

[1] Huang Q Y, Li H K. Superalloys. Beijing: Metallurgical Industry Press, 2004: 2

(黄乾尧, 李汉康. 高温合金. 北京: 冶金工业出版社, 2004: 2)

[2] Hu ZQ, Liu L R, Jin T, Sun X F. Aeroengine, 2005; 31(3): 1

(胡壮麒, 刘丽荣, 金 涛, 孙晓峰. 航空发动机, 2005; 31(3): 1)

[3] Han G M, Yu J J, Sun Y L, Sun X F, Hu Z Q. Mater Sci Eng, 2010; A527: 5383

[4] Zhang S H, Zhang J, Lou L H. J Mater Sci Technol, 2011; 27: 107

[5] Ding G L, Tewari S N. J Cryst Growth, 2002; 236: 420

[6] Zhao X B, Liu L, Yu Z H, Zhang W G, Fu H Z. Mater Charact, 2010; 61: 7

[7] He G, Li J G, Mao X M, Fu H Z. Acta Metall Sin, 1995; 31: 469

(何国, 李建国, 毛协民, 傅恒志. 金属学报, 1995; 31: 469)

[8] Gandin C A, Eshelman M, Trivedi R. Metall Mater Trans, 1996; 27A: 2727

[9] Grugel R N, Zhou Y. Metall Trans, 1989; 20A: 969

[10] Huang T W, Liu L, Zhang W G, Zhang J, Fu H Z. Acta Metall Sin, 2009; 45: 1225

(黄太文, 刘林, 张卫国, 张军, 傅恒志. 金属学报, 2009; 45: 1225)

[11] Polock T M, Murphy W H, Goldman E H, Uram D L, Tu J S. In: Antolovich S D, Stusrud R W, Mackay R A, Anton D L, Khan T, Kissinger R D, Klarstrom D L eds., Superalloys 1992, Warrendale: TMS, 1992: 125

[12] Ma D X, Grafe U. Mater Sci Eng, 1999; A270: 339

[13] Kearsey R M, Beddoes J C, Jaansalu K M, Thompson W T, Au P. In: Green K A, Pollock T M, Harada H, Howson T E, Reed R C, Schirra J J, Walston S eds., Superalloys 2004, Warrendale: TMS, 2004: 801

[14] Karunaratne M S A, Cox D C, Carter P, Reed R C. In: Pollock T M, Kissinger R D, Bowman R R, Green K A, McLean M, Olson S L, Schirra J J eds., Superalloys 2000, Warrendale: TMS, 2000: 263

[15] Seo S M, Lee J H, Yoo Y S, Jo C Y, Miyahara H, Ogi K. In: Reed R C, Green K A, Caron P, Gabb T P, Fahrmann M G, Huron E S, Woodard S R eds., Superalloys 2008, Warrendale: TMS, 2008: 277

[16] Zhao X B, Liu L, Zhang W G, Liu G, Zhang J, Fu H Z. Mater Lett, 2009; 63: 2635

[17] Hunt J D. Solidification and Casting of Metals. London: The Metals Society, 1979: 3

[18] Kurz W, Fisher D J. Acta Metall, 1981; 29: 11

[19] Trivedi R. Metall Trans, 1984; 15A: 977

[20] Han S H, Trivedi R. Acta Metall Mater, 1994; 1: 25

[21] An G Y, Liu L X. J Cryst Growth, 1987; 80: 383

[22] Zhao X B. PhD Thesis, Northwestern Polytechnical University, Xi’an, 2010

(赵新宝. 西北工业大学博士学位论文, 西安, 2010)

[23] Till W A, Jackson K A, Rutter J W, Chalmers B. Acta Metall, 1953; 1: 428

[24] Schneider M C, Gu J P, Beckermann C, Boettinger W J, Kattner U R. Metall Mater Trans, 1997; 28A: 1517

[25] Ma D, Sahm P R. Giesserei–Forschung, 1990; 82: 869

[26] Basaran M. Metall Trans, 1981; 12A: 1235

[27] Gu L Y, Liu Z Y, Shi Z X. Trans Nonferrous Met Soc China, 1996; 6: 110

(顾林喻, 刘忠元, 史正兴. 中国有色金属学报, 1996; 6: 110)

[28] Karunaratne M S A, Carter P, Reed R C. Mater Sci Eng, 2000; 281A: 229

[29] Zhao N R, Wang Z H, Li J G, Jin T, Sun X F, Yang H C, Hu Z Q. J Mater Eng, 2008; 2: 58

(赵乃仁, 王志辉, 李金国, 金涛, 孙晓峰, 杨洪才, 胡壮麒. 材料工程, 2008; 2: 58)
[1] 刘金来, 叶荔华, 周亦胄, 李金国, 孙晓峰. 一种单晶高温合金的弹性性能的各向异性[J]. 金属学报, 2020, 56(6): 855-862.
[2] 孙衡,林小娉,周兵,赵圣诗,唐琴,董允. 定向凝固Mg-xGd-0.5Y合金的微观组织及拉伸变形行为[J]. 金属学报, 2020, 56(3): 340-350.
[3] 许庆彦,杨聪,闫学伟,柳百成. 高温合金涡轮叶片定向凝固过程数值模拟研究进展[J]. 金属学报, 2019, 55(9): 1175-1184.
[4] 胡斌,李树索,裴延玲,宫声凯,徐惠彬. <111>取向小角偏离对一种镍基单晶高温合金蠕变性能的影响[J]. 金属学报, 2019, 55(9): 1204-1210.
[5] 刘杨,王磊,宋秀,梁涛沙. DD407/IN718高温合金异质焊接接头的组织及高温变形行为[J]. 金属学报, 2019, 55(9): 1221-1230.
[6] 张健,王莉,王栋,谢光,卢玉章,申健,楼琅洪. 镍基单晶高温合金的研发进展[J]. 金属学报, 2019, 55(9): 1077-1094.
[7] 马晋遥,王晋,赵云松,张剑,张跃飞,李吉学,张泽. 一种第二代镍基单晶高温合金1150 ℃原位拉伸断裂机制研究[J]. 金属学报, 2019, 55(8): 987-996.
[8] 唐文书,肖俊峰,李永君,张炯,高斯峰,南晴. 再热恢复处理对蠕变损伤定向凝固高温合金γ′相的影响[J]. 金属学报, 2019, 55(5): 601-610.
[9] 方辉,薛桦,汤倩玉,张庆宇,潘诗琰,朱鸣芳. 定向凝固糊状区枝晶粗化和二次臂迁移的实验和模拟[J]. 金属学报, 2019, 55(5): 664-672.
[10] 杨燕, 杨光昱, 罗时峰, 肖磊, 介万奇. Mg-14.61Gd合金的定向凝固组织及生长取向[J]. 金属学报, 2019, 55(2): 202-212.
[11] 金浩, 贾清, 刘荣华, 线全刚, 崔玉友, 徐东生, 杨锐. 籽晶制备及Ti-47Al合金PST晶体取向控制[J]. 金属学报, 2019, 55(12): 1519-1526.
[12] 康慧君, 李金玲, 王同敏, 郭景杰. 定向凝固Al-Mn-Be合金初生金属间化合物相生长行为及力学性能[J]. 金属学报, 2018, 54(5): 809-823.
[13] 苏彦庆, 刘桐, 李新中, 陈瑞润, 郭景杰, 傅恒志. 籽晶法定向凝固TiAl基合金片层取向控制[J]. 金属学报, 2018, 54(5): 647-656.
[14] 侯渊, 任忠鸣, 王江, 张振强, 李霞. 纵向静磁场对定向凝固GCr15轴承钢柱状晶向等轴晶转变的影响[J]. 金属学报, 2018, 54(5): 801-808.
[15] 吴国华, 陈玉狮, 丁文江. 高性能镁合金凝固组织控制研究现状与展望[J]. 金属学报, 2018, 54(5): 637-646.