Please wait a minute...
金属学报  2018, Vol. 54 Issue (5): 627-636    DOI: 10.11900/0412.1961.2017.00537
  金属材料的凝固专刊 本期目录 | 过刊浏览 |
李金富1,2(), 周尧和1
1上海交通大学材料科学与工程学院金属基复合材料国家重点实验室 上海 200240
2上海交通大学材料科学与工程学院上海市激光制造与材料改性重点实验室 上海 200240
Remelting of Primary Solid in Rapid Solidification of Deeply Undercooled Alloy Melts
Jinfu LI1,2(), Yaohe ZHOU1
1 State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
2 Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
全文: PDF(972 KB)   HTML


关键词 深过冷快速凝固固相重熔微观组织    

Solidification of deeply undercooled alloy melts proceeds with obvious temperature recalescence, during which part of primary solid is inevitably remelted, and the microstructural morphology is inevitably changed. During past decades, great improvement was achieved in modelling crystal growth in undercooled alloy melts, making it possible to quantitatively evaluate the remelting degree of primary solid at different undercoolings. In this paper, the progress in modelling the remelting of primary solid was introduced, and the variation of remelted fraction of primary solid as a function of the alloy feature and undercooling was presented. In combination with experimental results of crystal growth pattern and solidification structure in selected alloys, the mechanisms for grain refinement in undercooled single-phase alloys and anomalous eutectic formation in undercooled eutectic alloys were then discussed.

Key wordsdeep undercooling    rapid solidification    solid remelting    microstructure
收稿日期: 2017-12-14     
ZTFLH:  TG111  
基金资助:资助项目 国家自然科学基金项目Nos.51771116和51620105012

作者简介 李金富,男,1964年生,教授


李金富, 周尧和. 液态金属深过冷快速凝固过程中初生固相的重熔[J]. 金属学报, 2018, 54(5): 627-636.
Jinfu LI, Yaohe ZHOU. Remelting of Primary Solid in Rapid Solidification of Deeply Undercooled Alloy Melts. Acta Metall Sin, 2018, 54(5): 627-636.

链接本文:      或

图1  过冷熔体中分枝尖端沿轴向的温度分布与液相过冷度组成示意图[14]
图2  Ni75Cu25合金凝固时初生固相重熔分数和过冷度的关系[9]
图3  不同液相线斜率、平衡溶质分配系数和成分的共晶合金,共晶两相耦合生长时初生共晶重熔分数随过冷度的变化[14]
图4  Ni-18.7%Sn (原子分数)共晶合金深过冷快速凝固过程中初生相的重熔分数[30]
图5  Ni75Cu25合金晶粒度随过冷度的变化[9]
[1] Herlach D M.Non-equilibrium solidification of undercooled metallic metls[J]. Mater. Sci. Eng., 1994, R12: 177
[2] Wei B, Herlach D M, Sommer F, et al.Rapid solidification of undercooled eutectic and monotectic alloys[J]. Mater. Sci. Eng., 1993, A173: 357
[3] Battezzati L, Antonione C, Baricco M.Undercooling of Ni-B and Fe-B alloys and their metastable phase diagrams[J]. J. Alloys Compd., 1997, 247: 164
[4] Li J F, Lü Y L, Yang G C, et al.Directional solidification of undercooled melt[J]. Prog. Nat. Sci., 1997, 7: 736
[5] Yang C L, Liu F, Yang G C, et al.Structure evolution upon non-equilibrium solidification of bulk undercooled Fe-B system[J]. J. Cryst. Growth, 2009, 311: 404
[6] Drehman A J, Greer A L, Turnbull D.Bulk formation of a metallic glass: Pd40Ni40P20[J]. Appl. Phys. Lett., 1982, 41: 716
[7] Nishiyama N, Inoue A.Supercooling investigation and critical cooling rate for glass formation in Pd-Cu-Ni-P alloy[J]. Acta. Mater., 1999, 47: 1487
[8] Wei B B, Yang G C, Zhou Y H.High undercooling and rapid solidification of Ni-32.5%Sn eutectic alloy[J]. Acta Metall. Mater., 1991, 39: 1249
[9] Li J F, Liu Y C, Lu Y L, et al.Structural evolution of undercooled Ni-Cu alloys[J]. J. Cryst. Growth, 1998, 192: 462
[10] Kattamis T Z.Mechanism of establishment of cast microstructure during solidification of highly undercooled melts[J]. J. Cryst. Growth, 1976, 34: 215
[11] Li J F, Zhou Y H, Yang G C.Kinetic effect of crystal growth on the absolute stability of a planar interface in undercooled melts[J]. Mater. Res. Bull., 2000, 35: 1775
[12] Brener E, Müller-Krumbhaar H, Temkin D, et al.Morphology diagram of possible structures in diffusional growth[J]. Physica, 1998, 249A: 73
[13] Liu L, Li J F, Zhou Y H.Solidification interface morphology pattern in the undercooled Co-24.0at.%Sn eutectic melt[J]. Acta Mater., 2011, 59: 5558
[14] Wei X X, Lin X, Xu W, et al.Remelting-induced anomalous eutectic formation during solidification of deeply undercooled eutectic alloy melts[J]. Acta Mater., 2015, 95: 44
[15] Boettinger W J, Coriell S R, Trivedi R et al. Rapid Solidification Processing: Principles and Technologies IV [M]. Baton Rouge: Claitor's Publishing Division, 1988: 13
[16] Ivantsov G P.PIv is defined by Δ=PIvexp(PIv)E1(PIv), where E1(x) is the exponential integral function[J]. Dokl. Akad. Nauk. SSSR, 1947, 58: 567
[17] Langer J S, Müller-Krumbhaar H.Theory of dendritic growth—I. Elements of a stability analysis[J]. Acta Metall., 1978, 26: 1681
[18] Langer J S, Müller-Krumbhaar H.Theory of dendritic growth—II. Instabilities in the limit of vanishing surface tension[J]. Acta Metall., 1978, 26: 1689
[19] Müller-Krumbhaar H, Langer J S.Theory of dendritic growth—III. Effects of surface tension[J]. Acta Metall., 1978, 26: 1697
[20] Trivedi R, Kurz W.Morphological stability of a planar interface under rapid solidification conditions[J]. Acta Metall., 1986, 34: 1663
[21] Li J F, Jie W Q, Yang G C, et al.Solidification structure formation in undercooled Fe-Ni alloy[J]. Acta Mater., 2002, 50: 1797
[22] Jackson K A, Hunt J D.Lamellar and rod eutectic growth[J]. Trans. Metall. Soc. AIME, 1966, 236: 1129
[23] Trivedi R, Magnin P, Kurz W.Theory of eutectic growth under rapid solidification conditions[J]. Acta Metall., 1987, 35: 971
[24] Kurz W, Trivedi R.Eutectic growth under rapid solidification conditions[J]. Metall. Trans., 1991, 22A: 3051
[25] Li M J, Kuribayashi K.Nucleation-controlled microstructures and anomalous eutectic formation in undercooled Co-Sn and Ni-Si eutectic melts[J]. Metall. Mater. Trans., 2003, 34A: 2999
[26] Goetzinger R, Barth M, Herlach D M.Growth of lamellar eutectic dendrites in undercooled melts[J]. J. Appl. Phys., 1998, 84: 1643
[27] Li J F, Zhou Y H.Eutectic growth in bulk undercooled melts[J]. Acta Mater., 2005, 53: 2351
[28] Li M J, Nagashio K, Kuribayashi K.Reexamination of the solidification behavior of undercooled Ni-Sn eutectic melts[J]. Acta Mater., 2002, 50: 3241
[29] Yang C, Gao J, Zhang Y K, et al.New evidence for the dual origin of anomalous eutectic structures in undercooled Ni-Sn alloys: In situ observations and EBSD characterization[J]. Acta Mater., 2011, 59: 3915
[30] Li J F, Li X L, Liu L, et al.Mechanism of anomalous eutectic formation in the solidification of undercooled Ni-Sn eutectic alloy[J]. J. Mater. Res., 2008, 23: 2139
[31] Li J F, Jie W Q, Zhao S, et al.Structural evidence for the transition from coupled to decoupled growth in the solidification of undercooled Ni-Sn eutectic melt[J]. Metall. Mater. Trans., 2007, 38A: 1806
[32] Walker J L.The Physical Chemistry of Process Metallurgy[M]. New York: Interscience Publishers, 1959: 845
[33] Hunt J D, Jackson K A.Nucleation of solid in an undercooled liquid by cavitation[J]. J. Appl. Phys., 1966, 37: 254
[34] Horvay G.The tension field created by a spherical nucleus freezing into its less dense undercooled melt[J]. Int. J. Heat Mass. Transfer, 1965, 8: 195
[35] Kattamis T Z.Dendritic peculiarities in undercooled and internally chilled Fe-25 pct Ni alloy[J]. Metall. Trans., 1971, 2: 2000
[36] Powell G L F, Hogan L M. The influence of oxygen content on grain size of undercooled silver[J]. Trans. Met. Soc AIME, 1969, 245: 407
[37] Powell L F G. The undercooling of silver[J]. J. Aust. Inst. Met., 1965, 10: 3223
[38] Jones B L, Weston G M.Grain refinement in undercooled copper[J]. J. Aust. Inst. Met., 1970, 15: 3167
[39] Schwarz M, Karma A, Eckler K, et al.Physical mechanism of grain refinement in solidification of undercooled melts[J]. Phys. Rev. Lett., 1994, 73: 1380
[40] Li J F, Zhou Y H, Yang G C.Effect of solidification time on the structural evolution of undercooled single phase alloys[J]. J. Cryst. Growth, 1999, 206: 141
[41] Wilde G, G?rler G P, Willnecker R.Hypercooling of completely miscible alloys[J]. Appl. Phys. Lett., 1996, 69: 2995
[42] Lu S Y, Li J F, Li X L, et al.Grain boundaries in the refined solidification structure of undercooled Ni75Pd25[J]. Physica, 2008, 403B: 2609
[43] Lu S Y, Li J F, Zhou Y H.Recrystallization developed in the largely undercooled Ni54.6Pd45.4 alloy[J]. J. Alloys Compd., 2008, 458: 517
[44] Lu S Y, Li J F, Zhou Y H. Solidification structure of undercooled Ni54.6Pd45.4 alloy [J]. Mater. Sci. Eng., 2007, A460-461: 63
[45] Lu S Y, Li J F, Zhou Y H.Grain refinement in the solidification of undercooled Ni-Pd alloys[J]. J. Cryst. Growth, 2007, 309: 103
[46] Powell G L F, Hogen L M. Undercooling in silver-copper eutectic alloys[J]. J. Inst. Met., 1964, 93: 505
[47] Kattamis T Z, Flemings M C.Structure of undercooled Ni-Sn eutectic[J]. Metall. Mater. Trans., 1970, 1A: 1449
[48] Jones B L.Growth mechanisms in undercooled eutectics[J]. Metall. Trans., 1971, 2: 2950
[49] Liu X R, Cao C D, Wei B.Microstructure evolution and solidification kinetics of undercooled Co-Ge eutectic alloys[J]. Scr. Mater., 2002, 46: 13
[50] Liu F, Chen Y Z, Yang G C, et al.Competitions incorporated in rapid solidification of the bulk undercooled eutectic Ni78.6Si21.4 alloy[J]. J. Mater. Res., 2007, 22: 2953
[51] Wei B, Herlach D M, Sommer F, et al.Rapid solidification of undercooled eutectic and monotectic alloys[J]. Mater. Sci. Eng., 1993, A173: 355
[52] Goetzinger R, Barth M, Herlach D M.Mechanism of formation of the anomalous eutectic structure in rapidly solidified Ni-Si, Co-Sb and Ni-Al-Ti alloys[J]. Acta Mater., 1998, 46: 1647
[53] Lin X, Cao Y Q, Wang Z T, et al.Regular eutectic and anomalous eutectic growth behavior in laser remelting of Ni-30wt.%Sn alloys[J]. Acta Mater., 2017, 126: 210
[54] Clopet C R, Cochrane R F, Mullis A M.The origin of anomalous eutectic structures in undercooled Ag-Cu alloy[J]. Acta Mater., 2013, 61: 6894
[55] Clopet C R, Cochrane R F, Mullis A M.Spasmodic growth during the rapid solidification of undercooled Ag-Cu eutectic melts[J]. Appl. Phys. Lett., 2013, 102: 031906
[56] Zhao S, Li J F, Liu L, et al.Formation mechanism of anomalous eutectics in highly undercooled Ag-39.9at.%Cu alloy[J]. Chin. Phys., 2009, 18B: 1917
[57] Zhao S, Li J F, Liu L, et al.Cellular growth of lamellar eutectics in undercooled Ag-Cu alloy[J]. Mater. Charact., 2009, 60: 519
[58] Zhao S, Li J F, Liu L, et al.Eutectic growth from cellular to dendritic form in the undercooled Ag-Cu eutectic alloy melt[J]. J. Cryst. Grwoth, 2009, 311: 1387
[59] Huang Q S, Liu L, Wei X X, et al.Solidification behaviors of undercooled Ni-P alloys[J]. Acta Phys. Sin., 2012, 61: 166401(黄起森, 刘礼, 韦修勋等. 过冷Ni-P合金的凝固行为[J]. 物理学报, 2012, 61: 166401)
[1] 刘震鹏, 闫志巧, 陈峰, 王顺成, 龙莹, 吴益雄. 金刚石工具用Cu-10Sn-xNi合金的制备和性能表征[J]. 金属学报, 2020, 56(5): 760-768.
[2] 赵燕春, 毛雪晶, 李文生, 孙浩, 李春玲, 赵鹏彪, 寇生中. Fe-15Mn-5Si-14Cr-0.2C非晶钢微观组织与腐蚀行为[J]. 金属学报, 2020, 56(5): 715-722.
[3] 马晋遥,王晋,赵云松,张剑,张跃飞,李吉学,张泽. 一种第二代镍基单晶高温合金1150 ℃原位拉伸断裂机制研究[J]. 金属学报, 2019, 55(8): 987-996.
[4] 刘耀鸿,王朝辉,刘轲,李淑波,杜文博. Er对Mg-5Zn-xEr镁合金热裂敏感性的影响[J]. 金属学报, 2019, 55(3): 389-398.
[5] 邵成伟, 惠卫军, 张永健, 赵晓丽, 翁宇庆. 一种新型高强度高塑性冷轧中锰钢的组织和力学性能[J]. 金属学报, 2019, 55(2): 191-201.
[6] 姚彦桃, 陈礼清, 王文广. 原位反应浸渗法制备(B4C+Ti)混杂增强Mg及AZ91D复合材料及其阻尼性能[J]. 金属学报, 2019, 55(1): 141-148.
[7] 赵晓丽, 张永健, 邵成伟, 惠卫军, 董瀚. 两相区退火处理冷轧0.1C-5Mn中锰钢的氢脆敏感性[J]. 金属学报, 2018, 54(7): 1031-1041.
[8] 翟斌, 周凯, 吕鹏, 王海鹏. 自由落体条件下Ti-6Al-4V合金微液滴的快速凝固研究[J]. 金属学报, 2018, 54(5): 824-830.
[9] 康慧君, 李金玲, 王同敏, 郭景杰. 定向凝固Al-Mn-Be合金初生金属间化合物相生长行为及力学性能[J]. 金属学报, 2018, 54(5): 809-823.
[10] 吴国华, 陈玉狮, 丁文江. 高性能镁合金凝固组织控制研究现状与展望[J]. 金属学报, 2018, 54(5): 637-646.
[11] 马歌, 左秀荣, 洪良, 姬颖伦, 董俊媛, 王慧慧. 深海用X70管线钢焊接接头腐蚀行为研究[J]. 金属学报, 2018, 54(4): 527-536.
[12] 熊守美, 杜经莲, 郭志鹏, 杨满红, 吴孟武, 毕成, 曹永友. 镁合金压铸过程界面传热行为及凝固组织结构的表征与模拟研究[J]. 金属学报, 2018, 54(2): 174-192.
[13] 于菁, 王继杰, 倪丁瑞, 肖伯律, 马宗义, 潘兴龙. 电子束熔丝沉积快速成形2319铝合金的微观组织与力学性能[J]. 金属学报, 2018, 54(12): 1725-1734.
[14] 李斌, 林小辉, 李瑞, 张国君, 李来平, 张平祥. 不同B含量Mo-Si-B合金的高温抗氧化性能[J]. 金属学报, 2018, 54(12): 1792-1800.
[15] 梅益, 孙全龙, 喻丽华, 王传荣, 肖华强. 基于GA-ELM的铝合金压铸件晶粒尺寸预测[J]. 金属学报, 2017, 53(9): 1125-1132.