|
|
|
| 1500 MPa级低合金超高强钢的微观组织与力学性能 |
| 王立军; 蔡庆伍; 余伟; 武会宾; 雷爱娣 |
| 北京科技大学高效轧制国家工程研究中心; 北京 100083 |
|
| MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 1500 MPa GRADE ULTRA–HIGH STRENGTH LOW ALLOY STEEL |
| WANG Lijun; CAI Qingwu; YU Wei; WU Huibin; LEI Aidi |
National Engineering Research Center for Advanced Rolling Technology; University of Science and Technology Beijing;
Beijing 100083 |
引用本文:
王立军 蔡庆伍 余伟 武会宾 雷爱娣. 1500 MPa级低合金超高强钢的微观组织与力学性能[J]. 金属学报, 2010, 46(6): 687-694.
,
,
,
,
.
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 1500 MPa GRADE ULTRA–HIGH STRENGTH LOW ALLOY STEEL[J]. Acta Metall Sin, 2010, 46(6): 687-694.
| [1] Fan C G, Dong H, Yong Q L, Weng Y Q, Wang M Q, Shi J, Hui W J. Mater Mech Eng, 2006; 30: 1
(范长刚, 董瀚, 雍岐龙, 翁宇庆, 王毛球, 时捷, 惠卫军. 机械工程材料, 2006; 30: 1)
[2] Guo J W, Sun J B, Li H B, Rong S F. J Jiamusi Univ, 2002; 20: 23
(郭继伟, 孙建波, 李洪波, 荣守范. 佳木斯大学学报, 2002; 20: 23)
[3] Garrison Jr W M, Maloney J L. Mater Sci Eng, 2005; A403: 299
[4] Maloney J L, Garrison Jr W M. Acta Mater, 2005; 53: 533
[5] Ji G L, Li F G, Li Q H, Li H Q, Li Z. Mater Sci Eng, 2010; A527: 1165
[6] Li J, Guo F, Li Z, Wang J L, Yan M G. J Iron Steel Res Int, 2007; 14: 254
[7] hang L C, Bhadesha H K D H. Mater Sci Eng, 1994; A184: 17
[8] Sule Y S, Kahraman S, Erdinc K. Mater Charact, 2008; 59: 351
[9] Zhirafar S, Rezaeian A, Pugha M. J Mater Process Technol, 2007; 186: 298
[10] Fang H S, Liu D Y, Chang K D, Zhang C, Gu J L, Zhang W Z, Bai B Z, Yang Z G. J Iron Steel Res, 2001; 13(3): 31
(方鸿生, 刘东雨, 常开地, 张驰, 顾家琳, 张文征, 白秉哲, 杨志刚. 钢铁研究学报, 2001; 13(3): 31)
[11] Liu D Y, Fang H S, Bai B Z. Trans Mater Heat Treat, 2002; 23(4): 5
(刘东雨, 方鸿生, 白秉哲. 材料热处理学报, 2002, 23(4): 57)
[12] Fan C G, Dong H, Shi J, Liu Y L, Yong Q L, Hui W J, Wang M Q, Weng Y Q. Ordnance Mater Sci Eng, 2006;29(2): 31
(范长刚, 董瀚, 时捷, 刘燕林, 雍歧龙, 惠卫军, 王毛球, 翁宇庆. 兵器材料科学与工程; 2006; 29(2): 31)
[13] Wang L D, Ding F C, Wang B M, Zhu M, Zhong Y L, Liang J K. Acta Metall Sin, 2009; 45: 292
(王六定, 丁富才, 王佰民, 朱明, 钟英良, 梁锦奎. 金属学报, 2009; 45: 292)
[14] Gao K, Wang L D, Zhu M, Chen J D, Shi Y J, Kang M K. Acta Metall Sin, 2007; 43: 315
(高宽, 王六定, 朱民, 陈景东, 施易军, 康沫狂. 金属学报, 2007; 43: 315)
[15] Jing C N, Wang Z C, Han F T. Met Heat Treat, 2005; 30: 26
(景财年, 王作成, 韩福涛. 金属热处理, 2005; 30: 26)
[16] Gregg J M, Bhadeshia H K D H. Acta Mater, 1997; 45: 739
[17] Xu Z Y. Shanghai Met, 1995; 171
(徐祖耀. 上海金属, 1995; 17: 1)
[18] Zhou Y, Wu G H.Analysis Methods in Materials Science. 2nd Ed., Harbin: Harbin Institute of Technology Press, 2007: 95
(周玉, 武高辉. 材料分析测试技术. 第二版, 哈尔滨: 哈尔滨工业大学出版社, 2007: 95)
[19] Xu Z Y. Martensitic Transformation and Martensite. 2nd Ed., Beijing: Science Press, 1999: 84
(徐祖耀. 马氏体相变与马氏体. 第二版, 北京: 科学出版社, 1999: 84)
[20] Yong Q L. Secondary Phases in Steels. Beijing: Metallurgy Industry Press, 2006: 225, 247
(雍岐龙. 钢铁材料中的第二相. 北京: 冶金工业出版社, 2006: 225, 247) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
