Texture and magnetostriction in rolled Fe-Ga based alloy

Acta Metall Sin

2008, Vol. 44

Issue (9): 1031-1034 DOI:

Research Articles

Current Issue | Archive | Adv Search

Texture and magnetostriction in rolled Fe-Ga based alloy

;Gao Xue-xu;;;

Cite this article:

Gao Xue-xu. Texture and magnetostriction in rolled Fe-Ga based alloy. Acta Metall Sin, 2008, 44(9): 1031-1034 .

Download:

PDF(916KB)
Export: BibTeX | EndNote (RIS)

Abstract The addition of Nb was used to improve ductility during rolling process. The (Fe81Ga19)+1at.%Nb sheet with thickness of 0.6 mm was prepared by conventional rolling, including hot rolling and cold rolling. Results that demonstrate the rolled texture, recrystallization texture and magnetostriction of (Fe81Ga19)+1at.%Nb sheets are presented in this work. The as-rolled sheet had {111} and near {001}<110> rolling-texture grains, and had magnetostriction only as 26×10-6. A near {011}<100> texture and a {001}<100> texture were formed in recrystallized sheets which were water quenched after two hours annealed at 1250 °C and1300 °C, and their magnetostriction (3/2)s were 106×10-6and136×10-6 respectively.

Key words: Fe-Ga alloy rolling texture magnetostriction

Received: 15 January 2008

ZTFLH:	TG132.27
	TG337.2

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Gao Xue-xu

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2008/V44/I9/1031

[1]Guruswamy S,Srisukhumbowornchai N,Clark A E, Restorff J B,Wun-Fogle M.Scr Mater,2000;43:239
[2]Lograsso T A,Ross A R,Schlagel D L,Clark A E,Wun- Fogle M.J Alloys Compd,2003;350:95
[3]Cheng S F,Das B N,Wun-Fogle M,Lubitz P,Clark A E. IEEE Trans Magn,2002;38:2838
[4]Wun-Fogle M,Clark A E,Restorff J B.J Intell Mater Syst Struct,2006;17:117
[5]Kumagai A,Fujita A,Fukamichi K,Oikawa K,Kainuma R,Ishida K.J Magn Mater,2004;272-276:2060
[6]Clark A E,Wun-Fogle M,Restorff J B,Thomas A,Lo- grasso T A.Mater Trans,2002;43:881
[7]Han Z Y,Zhou S Z,Zhang M C,Gao X X.J Magn Mater Dev,2004;35(1):15 (韩志勇，周寿增，张茂才，高学绪．磁性材料及器件，2004；35(1)：15)
[8]Srisukhumbowornchai N,Guruswamy S.Metall Mater Trans,2004;35A:2963
[9]Na S M,Flatau A B.Proc SPIE,2005;5761:192
[10]Na S M,Flatau A B.Mater Res Soc Symp Proc,2006; 888:V06-07
[11]Yang W Y,Mao W M,Sun Z Q.Chin J Nonferrous Met, 1998;8:390 (杨王玥，毛卫民，孙祖庆．中国有色金属学报，1998；8：390)
[12]Yu Y N.Principles of Physical Metallurgy.Beijing:Met- allurgical Industry Press,2000:463 (余永宁．金属学原理．北京：冶金工业出版社，2000：463)

[1]	CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074.
[2]	FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti₂AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[3]	WANG Zhoutou, YUAN Qing, ZHANG Qingxiao, LIU Sheng, XU Guang. Microstructure and Mechanical Properties of a Cold Rolled Gradient Medium-Carbon Martensitic Steel[J]. 金属学报, 2023, 59(6): 821-828.
[4]	WANG Changsheng, FU Huadong, ZHANG Hongtao, XIE Jianxin. Effect of Cold-Rolling Deformation on Microstructure, Properties, and Precipitation Behavior of High-Performance Cu-Ni-Si Alloys[J]. 金属学报, 2023, 59(5): 585-598.
[5]	LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447.
[6]	YU Shaoxia, WANG Qi, DENG Xiangtao, WANG Zhaodong. Preparation and Size Effect of GH3600 Nickel-Based Superalloy Ultra-Thin Strips[J]. 金属学报, 2023, 59(10): 1365-1375.
[7]	CHEN Jilin, FENG Guanghong, MA Honglei, YANG Dong, LIU Wei. Microstructure, Mechanical Properties, and Strengthening Mechanism of Cr-Mo Microalloy Cold Heading Steel[J]. 金属学报, 2022, 58(9): 1189-1198.
[8]	CHEN Yuyong, YE Yuan, SUN Jianfei. Present Status for Rolling TiAl Alloy Sheet[J]. 金属学报, 2022, 58(8): 965-978.
[9]	REN Ping, CHEN Xingpin, WANG Cunyu, YU Feng, CAO Wenquan. Effects of Pre-Strain and Two-Step Aging on Microstructure and Mechanical Properties of Fe-30Mn-11Al-1.2C Austenitic Low-Density Steel[J]. 金属学报, 2022, 58(6): 771-780.
[10]	FENG Kai, GUO Yanbing, FENG Yulei, YAO Chengwu, ZHU Yanyan, ZHANG Qunli, LI Zhuguo. Microstructure Controlling and Properties of Laser Cladded High Strength and High Toughness Fe-Based Coatings[J]. 金属学报, 2022, 58(4): 513-528.
[11]	JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556.
[12]	HU Chen, PAN Shuai, HUANG Mingxin. Strong and Tough Heterogeneous TWIP Steel Fabricated by Warm Rolling[J]. 金属学报, 2022, 58(11): 1519-1526.
[13]	YANG Ping, WANG Jinhua, MA Dandan, PANG Shufang, CUI Feng'e. Influences of Composition on the Transformation-Controlled {100} Textures in High Silicon Electrical Steels Prepared by Mn-Removal Vacuum Annealing[J]. 金属学报, 2022, 58(10): 1261-1270.
[14]	QIU Longshi, ZHAO Jing, PAN Xiaolong, TIAN Feng. Interfacial Fatigue Spalling Behavior of TiN Films on High Speed Steel[J]. 金属学报, 2021, 57(8): 1039-1047.
[15]	DING Ning, WANG Yunfeng, LIU Ke, ZHU Xunming, LI Shubo, DU Wenbo. Microstructure, Texture, and Mechanical Properties of Mg-8Gd-1Er-0.5Zr Alloy by Multi-Directional Forging at High Strain Rate[J]. 金属学报, 2021, 57(8): 1000-1008.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed