Please wait a minute...
Acta Metall Sin  1996, Vol. 32 Issue (10): 1087-1092    DOI:
Current Issue | Archive | Adv Search |
A MICROSTRUCTURAL EVOLUTION OF Ag-Cu NANOCRYSTALLINE ALLOYS
PING Dehai;QIN Hiaoying;LI Douxing;ZHANG Lide;YE Hengqiang(Laboratory of Atomic Imaging of Solids;Institute of Metal Research;Chinese Academy of Sciences;Shenyang 110015)(Institute of Solid State Physics;Chinese Academy of Sciences;Hefei 230031)(Institute of Metal Research;Chinese Academy of Sciences;Shenyang 110015)(Manuscript received 1995-12-25)
Cite this article: 

PING Dehai;QIN Hiaoying;LI Douxing;ZHANG Lide;YE Hengqiang(Laboratory of Atomic Imaging of Solids;Institute of Metal Research;Chinese Academy of Sciences;Shenyang 110015)(Institute of Solid State Physics;Chinese Academy of Sciences;Hefei 230031)(Institute of Metal Research;Chinese Academy of Sciences;Shenyang 110015)(Manuscript received 1995-12-25). A MICROSTRUCTURAL EVOLUTION OF Ag-Cu NANOCRYSTALLINE ALLOYS. Acta Metall Sin, 1996, 32(10): 1087-1092.

Download:  PDF(434KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  A detailed microstructure analysis of Ag1-xCux(0.05≤x≤0.40) nanocrystalline alloys synthesized by an inert gas condensation method was reported.Results show that homogeneous Ag-Cu nanocrystalline alloys can be prepared, and the grains of the two components are about equal in size,no preferred orientation is detectable.However,for larger Cu pontents up to 40%(atomic fraction),the segregation of Cu particles was observed in some of the samples.No appreciable Ag-Cu metastable phase was detected by electron diffraction technique and HREM observation,only a two-phase equilibrium structure was observed.
Key words:  Ag-Cu nanocrystalline alloy      microstructure      high resolution electron microscopy     
Received:  18 October 1996     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I10/1087

1WunderlichW,IshidaY,MaurerR.ScrMetallMater,1990;24:4032SiegelRW,ThomasGJ.Ultramicroscopy,1992;40:3763LiDX,PingDH,YeHQ,QinXY,WuXJ.MaterLett,1993;18:294BirringerR,GleiterH,KleinHP,MarquardtP.physLett,1984;102A:3655GanapathiSK,RigneyDA.ScrMetallMater.1990;24:16756KizukaT,NakagamiY,OhataT,KanazawaI,IchinoseH,MurakamiH,IshidaY.philosMag,1994;69A:5517SiegelRW,RamasamyS,HahuH,LiZQ,LuT,GronskyR.JMaterRes,1988;3:13678HerrU,JingJ,GonserH,GleiterH.SolidStateCommun,1990;76:1979GleiterH.ProgMaterSci,1989;33:22310DuwezP,WillensRH,KlementWJr.,ApplPhys,1960;31:113611UenishiK,KobayashiKF,IshiharaKN,ShinguPH.MaterSciEng,1991,134A:134212PingDH,LiDX,YeHQ.JMaterSciLett,1995;14:153613BirringerR,HerrU,GleiterH.TransJpnInstMet,1986;27:43p
[1] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[2] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[3] ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[4] LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[5] CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[6] LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[7] LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[8] SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[9] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[10] WANG Fa, JIANG He, DONG Jianxin. Evolution Behavior of Complex Precipitation Phases in Highly Alloyed GH4151 Superalloy[J]. 金属学报, 2023, 59(6): 787-796.
[11] WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[12] GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[13] FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti2AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[14] ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
[15] LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667.
No Suggested Reading articles found!