EFFECT OF COOLING RATE AND Ce CONTENT ON STRUCTURE OF RAPIDLY SOLIDIFIED Al-Ce BINARY ALLOYS

Acta Metall Sin

1993, Vol. 29

Issue (2): 20-23 DOI:

Current Issue | Archive | Adv Search

EFFECT OF COOLING RATE AND Ce CONTENT ON STRUCTURE OF RAPIDLY SOLIDIFIED Al-Ce BINARY ALLOYS

QIU Qingrong;LI Qingchun;JIANG Zuling Harbin Institute of Technology

Cite this article:

QIU Qingrong;LI Qingchun;JIANG Zuling Harbin Institute of Technology. EFFECT OF COOLING RATE AND Ce CONTENT ON STRUCTURE OF RAPIDLY SOLIDIFIED Al-Ce BINARY ALLOYS. Acta Metall Sin, 1993, 29(2): 20-23.

Download:

PDF(1459KB)
Export: BibTeX | EndNote (RIS)

Abstract Less Ce content in rapidly solidified Al-Ce alloys at a certain cooling rate wasfound to facilitate the formation of granular disperse phase. While the alloys with definitecomposition may easily precipitate globular grains of higher dispersity if the cooling rate wasaccelerated.

Key words: rapid solidification Al-Ce Alloys microstructure

Received: 18 February 1993

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	Collect articles（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1993/V29/I2/20

1 Ruder A, Eliezer D. J Mater Sci, 1990; 25: 3541
2 神尾彰彦,手塚裕康,里达雄,Long T T,高桥恒夫.轻金属,1985;35:439
3 Ayer R, Angers L M, Mueller R R, Scanlon J C, Klein C F. Metall Trans. 1988; 19A: 1645
4 Burden M H, Jones H. J Inst Met, 1970; 98: 249
5 Sato T, Ohira G. Trans Jpn Inst Met, 197l; 12: 285
6 Ungar L H, Brown R A. Phys Rev, 1985; 31: 5931C

[1]	ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800^oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[2]	LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[3]	GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[4]	WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[5]	CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[6]	LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[7]	LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[8]	SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[9]	ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y₂O₃ Content on Properties of Fe-Y₂O₃ Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[10]	WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[11]	WANG Fa, JIANG He, DONG Jianxin. Evolution Behavior of Complex Precipitation Phases in Highly Alloyed GH4151 Superalloy[J]. 金属学报, 2023, 59(6): 787-796.
[12]	FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti₂AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[13]	GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[14]	ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
[15]	WANG Changsheng, FU Huadong, ZHANG Hongtao, XIE Jianxin. Effect of Cold-Rolling Deformation on Microstructure, Properties, and Precipitation Behavior of High-Performance Cu-Ni-Si Alloys[J]. 金属学报, 2023, 59(5): 585-598.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed