Please wait a minute...
金属学报  2005, Vol. 41 Issue (11): 1215-1220     
  论文 本期目录 | 过刊浏览 |
一种镍基单晶高温合金蠕变机制的研究
刘丽荣; 金 涛 赵乃仁; 王志辉; 孙晓峰; 管恒荣; 胡壮麒
中国科学院金属研究所;沈阳工业大学材料科学与工程学院
Creep deformation mechanism in a Ni base single crystal superalloy
LIU Lirong; JIN Tao; ZHAO Nairen; WANG Zhihui; SUN Xiaofeng;GUAN Hengrong; HU Zhuangqi
Institute of Metal Research; The Chinese Academy of Sciences; School of Materials Science and Engineering; Shenyang University of Technology
引用本文:

刘丽荣; 金涛; 赵乃仁; 王志辉; 孙晓峰; 管恒荣; 胡壮麒 . 一种镍基单晶高温合金蠕变机制的研究[J]. 金属学报, 2005, 41(11): 1215-1220 .
, , , , , , . Creep deformation mechanism in a Ni base single crystal superalloy[J]. Acta Metall Sin, 2005, 41(11): 1215-1220 .

全文: PDF(578 KB)  
摘要: 对一种镍基单晶高温合金在两种蠕变条件下(760℃/780 MPa 和 982℃/248 MPa)的变形机制进行分析. 结果表明: 在中温高应力条件下(760℃/780 MPa), 在低应变阶段,位错以堆垛层错的形式切入γ’相; 高应变阶段, 位错以位错对的方式切入γ'相. 在高温低应力条件下(982℃/248 MPa)的低应变阶段, 母相 a/2<110>位错在基体中运动弓出, 并绕过γ'相, 发生位错反应而形成位错网; 高应变阶段与中温高应力条件的切入机制相同.
关键词 镍基单晶高温合金蠕变变形位错    
Abstract:The creep deformation mechanisms of a Ni base single crystal superalloy at 760℃/780 MPa and 982℃/248 MPa were studied by a transmission electron microscopy (TEM). The results show that under moderate temperature and high stress (760℃/780 MPa), the γ' phase is sheared through dissociation of matrix dislocation, leaving a stacking fault at low strain stage; while at high strain stage, the γ' phase is cut by dislocation pairs. Under high temperature and low stress (982℃/248 MPa), the deformation is based on the movement of dislocations in the matrix, bowing of the matrix dislocations between the γ' precipitates and dislocation reacting to form the dislocation networks at low strain stage; while at high strain stage, the γ' phase is cut as that of 760℃/780 MPa
Key wordsNi base single crystal superalloy    creep deformation    dislocation
收稿日期: 2005-06-30     
ZTFLH:  TG132.3  
[1] Khan T. In: Betz W, ed., High Temperature Alloys for Gas Turbines and Other Applications 1986, Dordrecht, Holland: D. Reidel Publishing Company, 1968: 21
[2] Caron P, Khan T. Mater Sci Eng, 1983; 61: 173
[3] Lin D L, Wen M. Mater Sci Eng, 1989; A113: 207
[4] Webster G A, Piearcey B J. Met Sci J, 1967; 1: 97
[5] Liu L R, Jin T, Zhao N R, Wang Z H, Sun X F, Guan H R, Hu Z Q. Acta Metall Sin, 2004; 40: 858 (刘丽荣,金涛,赵乃仁,王志辉,孙晓峰,管恒荣,胡壮麒. 金属学报,2004;40:858)
[6] Links T, Feller-Kniepmeier M. Metall Trans, 1992;23A:99
[7] Pollock T M, Argon A S. Acta Metall Mater, 1992; 40: 1
[8] Auerswald J, Mukherji D, Chen W, Wahi R P. Z Metallkd,1997; 88: 652
[9] Mukherji D, Jiao F, Chen W, Wahi R P. Acta Metall Mater, 1991; 39: 1515
[10] Milligan W, Antolovich S. Metall Trans, 1990; 22A: 2309
[11] Kear B H, Giamei A F, Silcock J M, Ham J M. Scr Metall,1986; 2: 287
[12] Veyssiere P, Douin J, Beauchamp P. Philos Mag, 1985;51A: 469
[13] Condat M, Decamps B. Scr Metall, 1987; 21: 607
[14] Caron P, Khan T, Veyssiere P. Philos Mag, 1985; 57A:859
[15] Milligan W W, Antolovich S D. Metall Trans, 1991; 22A:2309
[16] Zhang J H, Hu Z Q, Xu Y B, Wang Z G. Metall Trans, 1992; 23A: 1253
[1] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229.
[2] 韩卫忠, 卢岩, 张雨衡. 体心立方金属韧脆转变机制研究进展[J]. 金属学报, 2023, 59(3): 335-348.
[3] 张子轩, 于金江, 刘金来. 镍基单晶高温合金DD432的持久性能各向异性[J]. 金属学报, 2023, 59(12): 1559-1567.
[4] 韩冬, 张炎杰, 李小武. 短程有序对高层错能Cu-Mn合金拉-拉疲劳变形行为及损伤机制的影响[J]. 金属学报, 2022, 58(9): 1208-1220.
[5] 田妮, 石旭, 刘威, 刘春城, 赵刚, 左良. 预拉伸变形对欠时效7N01铝合金板材疲劳断裂的影响[J]. 金属学报, 2022, 58(6): 760-770.
[6] 高川, 邓运来, 王冯权, 郭晓斌. 蠕变时效对欠时效7075铝合金力学性能的影响[J]. 金属学报, 2022, 58(6): 746-759.
[7] 郑士建, 闫哲, 孔祥飞, 张瑞丰. 纳米金属层状材料强塑性的界面调控[J]. 金属学报, 2022, 58(6): 709-725.
[8] 武晓雷, 朱运田. 异构金属材料及其塑性变形与应变硬化[J]. 金属学报, 2022, 58(11): 1349-1359.
[9] 安旭东, 朱特, 王茜茜, 宋亚敏, 刘进洋, 张鹏, 张钊宽, 万明攀, 曹兴忠. 奥氏体316不锈钢中位错与氢的相互作用机理[J]. 金属学报, 2021, 57(7): 913-920.
[10] 兰亮云, 孔祥伟, 邱春林, 杜林秀. 基于多尺度力学实验的氢脆现象的最新研究进展[J]. 金属学报, 2021, 57(7): 845-859.
[11] 石增敏, 梁静宇, 李箭, 王毛球, 方子帆. 板条马氏体拉伸塑性行为的原位分析[J]. 金属学报, 2021, 57(5): 595-604.
[12] 徐静辉, 李龙飞, 刘心刚, 李辉, 冯强. 热力耦合对一种第四代镍基单晶高温合金1100℃蠕变组织演变的影响[J]. 金属学报, 2021, 57(2): 205-214.
[13] 和思亮, 赵云松, 鲁凡, 张剑, 李龙飞, 冯强. 热等静压对铸态及固溶态第二代镍基单晶高温合金显微缺陷及持久性能的影响[J]. 金属学报, 2020, 56(9): 1195-1205.
[14] 梁晋洁, 高宁, 李玉红. 体心立方Fe中微裂纹与间隙型位错环相互作用的分子动力学模拟[J]. 金属学报, 2020, 56(9): 1286-1294.
[15] 李美霖, 李赛毅. 金属Mg二阶锥面<c+a>刃位错运动特性的分子动力学模拟[J]. 金属学报, 2020, 56(5): 795-800.