金属学报  2010, Vol. 46 Issue (12): 1517-1521    DOI: 10.3724/SP.J.1037.2010.00276

论文 本期目录 | 过刊浏览 |

包Al层聚集对搅拌摩擦焊接头力学性能的影响

康旭1,史清宇1,孙凯1,王鑫2

1.清华大学机械工程系先进成形制造教育部重点实验室, 北京 100084 2. 清华大学核能与新能源技术研究院, 北京 100084

INFLUENCES ON MECHANICAL PROPERTIES OF FRICTION STIR WELDED JOINTS BY Al CLAD ACCUMULATION

KANG Xu1, SHI Qingyu1, SUN Kai1, WANG Xin2

1.Key Laboratory for Advanced Materials Processing Technology, Department of Mechanical Engineering, Tsinghua University, Beijing 100084 2.Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084

康旭 史清宇 孙凯 王鑫. 包Al层聚集对搅拌摩擦焊接头力学性能的影响[J]. 金属学报, 2010, 46(12): 1517-1521.
, , , . INFLUENCES ON MECHANICAL PROPERTIES OF FRICTION STIR WELDED JOINTS BY Al CLAD ACCUMULATION[J]. Acta Metall Sin, 2010, 46(12): 1517-1521.

摘要 参考文献 相关文章 Metrics 全文: PDF(1582 KB)   摘要: 通过拉伸以及三点弯曲实验, 研究了底部包Al层聚集现象对搅拌摩擦焊接头力学性能的影响. 利用OM, SEM和EDS分析了底部包Al层聚集现象降低接头力学性能的原因. 实验结果表明: 焊接前未去除包Al层的试样,其抗拉和抗弯强度要比焊前或者焊后去除包Al层的试样低. 焊接过程中,焊缝底部平铺的包Al层在搅拌头的作用下, 被流动的金属材料挤到了洋葱环的两侧, 并在底部产生聚集. 由于包Al层的力学性能较差,聚集的位置成为了接头中力学性能薄弱的区域. 在受到拉应力作用时,聚集的包Al层首先发生断裂, 形成接头中的微裂纹. 在拉应力的持续作用下进而扩展成宏观裂纹, 诱导接头过早断裂. 关键词 ： 搅拌摩擦焊,  包Al层,  力学性能,  微观组织     Abstract：Friction stir welding (FSW) is increasingly used in joining the high strength aluminum alloys. Compared to traditional fusion welding methods, one of advantages of FSW is to obtain defect–free joints more easily. Besides the forms of FSW tools and welding parameters, certain characteristics of the base material can also affect the quality of welded joints. There is usually a protective layer on aluminum alloy surface to prevent corrosion, called Al clad. Generally the mechanical properties of Al clad are significantly lower than those of the base metal. In this paper, tensile and three–point bending tests were applied to investigate the influence of accumulated Al clad on mechanical properties of joints. The mechanism of reducing the mechanical properties of joints, caused by the accumulated Al clad was analyzed by OM, SEM and EDS. The results show that the mechanical properties of the welded joints are lower than those of the joint with which the bottom Al clad on the base material is removed before or after welding. The Al clad tiled on bottom of the base material is squeezed to both sides of the onion ring in the role of the FSW tool and gathered in the bottom after welding. Due to the poorer mechanical properties of Al clad than the base metal, the Al clad aggregation positions become the weak areas in the joints, leading to the formation of the micro cracks in the joints under tensile stress where the micro cracks continue extending to generate macro cracks under the continuous tensile stress. This is the main eason of joint breaking more easily under low strss. Key words： friction stiwelding    Al clad    mechanical properties    microstructure 收稿日期: 2010-06-10      ZTFLH:  TG453   基金资助: 国家自然科学基金资助项目 50875146 作者简介: 康旭, 男, 1985年生, 硕士生 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 康旭 史清宇 孙凯 wangxin 44.8K 链接本文: https://www.ams.org.cn/CN/10.3724/SP.J.1037.2010.00276      或      https://www.ams.org.cn/CN/Y2010/V46/I12/1517 [1] Thomas W M, Nicholas E D, Needham J C, Murch M G, Templesmith P, Dawes C J. Gr Br Pat Appl No. 9125978.8, 1991 [2] Mishra R S, Ma Z Y. Mater Sci Eng, 2005; R50: 1 [3] Colegrove P A, Shercliff H R. Sci Technol Weld Joining, 2003; 8(5): 360 [4] Threadgill P L, Leonard A J, Shercliff H R, Withers P J. Int Mater Rev, 2009; 54(2): 49 [5] Lombard H, Hattingh D G, Steuwer A, James M N. Eng Fract Mech, 2008; 75: 341 [6] Zhou P Z, Li D H, He D Q, Deng H. Trans Chin Weld Inst, 2007; 28(10): 5 (周鹏展, 李东辉, 贺地求, 邓航. 焊接学报, 2007; 28(10): 5) [7] Wang W, Shi Q Y, Li T, Li Hong Ke. Trans Chin Weld Inst, 2008; 29(5): 77 (王伟, 史清宇, 李亭, 李红克. 焊接学报, 2008; 29(5): 77) [8] Zhao J J, Zhang P, Wang W X, Ma L, Hu W W. Trans Chin Weld Inst, 2005; 26(5): 61 (赵军军, 张平, 王卫欣, 马琳, 胡卫伍. 焊接学报, 2005; 26(5): 61) [9] Fu Z H, He D Q, Zhou P Z, Hu A W. Trans Chin Weld Inst, 2006; 27(5): 65 (傅志红, 贺地求, 周鹏展, 胡爱武. 焊接学报, 2006; 27(5): 65) [10] Zhou P Z, Zhong J, He D Q. Chin J Nonferr Metals, 2006; 16(6): 964 (周鹏展, 钟掘, 贺地求. 中国有色金属学报, 2006; 16(6): 964) [11] Elangovan K, Balasubramanian V. Mater Des, 2008; 29: 362 [12] Ke L M, Pan J L, Xing L, Wang S L. Trans Chin Weld Inst, 2007; 28(5): 33 (柯黎明, 潘际銮, 邢丽, 王善林. 焊接学报, 2007; 28(5): 33) [13] Dong C L, Shen C B, Wang Z Z. J Dalian Jiaotong Univ, 2009; 30(6): 42 (董春林, 沈长斌, 王忠志. 大连交通大学学报, 2009; 30(6): 42) [14] Yan K, Ma Z X, Zhang J. J Mater Eng, 2008; 9: 44 (严铿, 马志新, 张健. 材料工程, 2008; 9: 44) [15] Kang X. Bachelor Thesis, Tsinghua University, Beijing, 2008 (康旭. 清华大学学士学位论文, 北京, 2008) [16] Wang X. Master Thesis, Tsinghua University, Beijing, 2008 (王鑫. 清华大学硕士学位论文, 北京, 2009) [1] 郑亮, 张强, 李周, 张国庆. 增/降氧过程对高温合金粉末表面特性和合金性能的影响：粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278. [2] 张雷雷, 陈晶阳, 汤鑫, 肖程波, 张明军, 杨卿. K439B铸造高温合金800℃长期时效组织与性能演变[J]. 金属学报, 2023, 59(9): 1253-1264. [3] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108. [4] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124. [5] 丁桦, 张宇, 蔡明晖, 唐正友. 奥氏体基Fe-Mn-Al-C轻质钢的研究进展[J]. 金属学报, 2023, 59(8): 1027-1041. [6] 陈礼清, 李兴, 赵阳, 王帅, 冯阳. 结构功能一体化高锰减振钢研究发展概况[J]. 金属学报, 2023, 59(8): 1015-1026. [7] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096. [8] 刘兴军, 魏振帮, 卢勇, 韩佳甲, 施荣沛, 王翠萍. 新型钴基与Nb-Si基高温合金扩散动力学研究进展[J]. 金属学报, 2023, 59(8): 969-985. [9] 袁江淮, 王振玉, 马冠水, 周广学, 程晓英, 汪爱英. Cr2AlC涂层相结构演变对力学性能的影响[J]. 金属学报, 2023, 59(7): 961-968. [10] 吴东江, 刘德华, 张子傲, 张逸伦, 牛方勇, 马广义. 电弧增材制造2024铝合金的微观组织与力学性能[J]. 金属学报, 2023, 59(6): 767-776. [11] 冯艾寒, 陈强, 王剑, 王皞, 曲寿江, 陈道伦. 低密度Ti2AlNb基合金热轧板微观组织的热稳定性[J]. 金属学报, 2023, 59(6): 777-786. [12] 张东阳, 张钧, 李述军, 任德春, 马英杰, 杨锐. 热处理对选区激光熔化Ti55531合金多孔材料力学性能的影响[J]. 金属学报, 2023, 59(5): 647-656. [13] 侯娟, 代斌斌, 闵师领, 刘慧, 蒋梦蕾, 杨帆. 尺寸设计对选区激光熔化304L不锈钢显微组织与性能的影响[J]. 金属学报, 2023, 59(5): 623-635. [14] 王长胜, 付华栋, 张洪涛, 谢建新. 冷轧变形对高性能Cu-Ni-Si合金组织性能与析出行为的影响[J]. 金属学报, 2023, 59(5): 585-598. [15] 刘满平, 薛周磊, 彭振, 陈昱林, 丁立鹏, 贾志宏. 后时效对超细晶6061铝合金微观结构与力学性能的影响[J]. 金属学报, 2023, 59(5): 657-667. Viewed Full text Abstract Cited   Shared      Discussed