Please wait a minute...
金属学报  2026, Vol. 62 Issue (10): 1635-1654    DOI: 10.11900/0412.1961.2026.00109
  综述 本期目录 | 过刊浏览 |
合金化调控Nb-Si基超高温合金强韧化与抗氧化性能的研究进展
李云龙1(), 张子润1, 于君2, 赵占勇1, 林鑫2(), 白培康1
1 中北大学 金属凝固控制与增材制造山西省重点实验室 太原 030051
2 西北工业大学 凝固技术全国重点实验室 西安 710072
Research Progress on Alloying Regulation of Strengthening, Toughening, and Oxidation Resistance in Nb-Si-Based Ultrahigh-Temperature Alloys
LI Yunlong1(), ZHANG Zirun1, YU Jun2, ZHAO Zhanyong1, LIN Xin2(), BAI Peikang1
1 Provincial Key Laboratory of Metal Solidification Control and Additive Manufacturing, North University of China, Taiyuan 030051, China
2 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China
引用本文:

李云龙, 张子润, 于君, 赵占勇, 林鑫, 白培康. 合金化调控Nb-Si基超高温合金强韧化与抗氧化性能的研究进展[J]. 金属学报, 2026, 62(10): 1635-1654.
Yunlong LI, Zirun ZHANG, Jun YU, Zhanyong ZHAO, Xin LIN, Peikang BAI. Research Progress on Alloying Regulation of Strengthening, Toughening, and Oxidation Resistance in Nb-Si-Based Ultrahigh-Temperature Alloys[J]. Acta Metall Sin, 2026, 62(10): 1635-1654.

全文: PDF(2260 KB)   HTML
摘要: 

Nb-Si基超高温合金因兼具高熔点、低密度以及优异的高温强度和蠕变性能,被认为是替代传统镍基高温合金、服务航空发动机热端构件1200~1400 ℃服役需求的重要候选材料。该类合金通常由铌基固溶体(Nbss)与硅化物构成,其中 Nbss 有利于改善室温韧性,硅化物则赋予材料较高的高温强度和热稳定性。然而,由于脆性硅化物主导的裂纹萌生和扩展、Nbss连续性不足以及高温氧化过程中难以形成稳定保护膜等问题,Nb-Si基超高温合金面临室温断裂韧性不足与高温抗氧化性能差的瓶颈。本文围绕Nb-Si基超高温合金的制备工艺-组织-性能之间的关系,系统综述了定向凝固、电弧熔炼、粉末冶金和增材制造等制备工艺对其相组成、组织特征与性能的影响,重点归纳了Ti、Zr、Mo、Cr、Al、B、Ta、Hf及稀土元素在组织优化、强韧化和抗氧化性能调控中的作用规律,并进一步总结了多元合金化在抑制Nb3Si生成、稳定有利硅化物、维持Nbss连续性及形成保护性氧化层方面的协同与负协同效应。最后,针对当前研究中存在的性能评价标准不统一、成分-工艺耦合规律不清及强韧化与抗氧化性能协同设计不足等问题,提出了面向极端服役环境的Nb-Si基超高温合金设计思路与发展方向。

关键词 : Nb-Si基超高温合金,  合金化调控,  相稳定,  组织优化,  断裂韧性,  高温抗氧化性能    
Abstract:

Nb-Si-based ultrahigh-temperature alloys are considered promising candidates to replace conventional Ni-based superalloys in hot-end aerospace components operating at 1200-1400 oC owing to their high melting point, low density, high-temperature strength, and creep resistance. Their microstructures generally comprise a niobium solid solution (Nbss) and silicide phases, with the Nbss providing room-temperature toughness and the silicides imparting high-temperature strength and thermal stability. However, the inherent brittleness of the silicides, insufficient continuity of the Nbss phase, and the difficulty of forming a stable protective oxide scale at elevated temperatures create a long-standing trade-off between room-temperature fracture toughness and high-temperature oxidation resistance, thereby severely limiting the engineering applications of these alloys. This review focuses on the relationships among processing technology, microstructure, and properties in Nb-Si-based alloys. The effects of directional solidification, arc melting, powder metallurgy, and additive manufacturing on phase constitution, microstructural characteristics, and properties are systematically summarized. Particular attention is given to the roles of Ti, Zr, Mo, Cr, Al, B, Ta, Hf, and rare-earth elements in phase stabilization, microstructure optimization, strengthening, toughening, and oxidation resistance. In addition, the synergistic and antagonistic effects of multi-element alloying are discussed in terms of suppressing Nb3Si formation, stabilizing beneficial silicides, maintaining Nbss continuity, and promoting the formation of protective oxide scales. Finally, current challenges, including the lack of unified performance evaluation criteria, insufficient understanding of composition-process coupling, and limited design strategies for simultaneously enhancing toughness and oxidation resistance, are highlighted. Future directions for the design and development of high-performance Nb-Si-based ultrahigh-temperature alloys for extreme service environments are also proposed.

Key words: Nb-Si-based ultrahigh-temperature alloy    alloying regulation    phase stability    microstructural optimization    fracture toughness    high-temperature oxidation resistance
收稿日期: 2026-04-16     
ZTFLH:  TG146.4  
基金资助:国家自然科学基金项目(52405433);山西省基础研究计划项目(202403021212119)
通讯作者: 李云龙,lyunlong@nuc.edu.cn,主要从事高性能金属增材制造等方面的研究;
林鑫,xlin@nwpu.edu.cn,主要从事金属增材制造与创新设计等方面的研究
Corresponding author: LI Yunlong, associate professor, Tel: 15702962668, E-mail: lyunlong@nuc.edu.cn;
LIN Xin, professor, Tel: (029)88494001, E-mail: xlin@nwpu.edu.cn
作者简介: 李云龙,男,1992年生,副教授,博士
图1  Nb-Si二元相图[9]
图2  Nb-Si基超高温合金的相组成、组织作用及核心瓶颈示意图
图3  Nb-Si基超高温合金制备工艺及其典型微观组织形貌[10~18]
ProcessMicrostructure characteristic

Main advantage

Main limitationRepresentative application

Arc melting[24-26]

Coarse as-cast structure;microsegregation;shrinkage cavities;limited Nbss continuity controlMature process;flexible alloy design;convenient for composition explorationInhomogeneous solidification;casting defects;limited ingot sizeAlloy preparation; composition optimization; phase analysis

Powder metallurgy[5,15,21]

Refined grains;high densification;uniform phase distributionGrain refinement; defect reduction; improved microstructure homogeneityHigh powder cost; bulk size limit; complex processingDense bulk alloy fabrication; fine-grained design

Directional solidification[5,19,20]

Refined silicides; ordered phase alignment; directional Nbss/silicides distributionExcellent high-temperature strength, creep resistance; directional load-bearingNarrow processing window; strict equipment control; poor room-temperature toughnessHigh-temperature alloy development; creep-resistant design

Additive manufacturing[5,18,23]

Ultrafine structure;reduced dendrite spacing; enhanced Nbss continuityNear-net shaping of complex parts; strong grain refinement; rapid composition iterationHigh residual stress; pronounced anisotropy; unstable process parametersComplex component fabrication; rapid alloy development
表1  Nb-Si基超高温合金主要制备工艺对比[5,15,18~21,23~26]
图4  Nb-16Si-xZr合金微观组织的 BSE像[30]
图5  电弧熔炼Nb-22Ti-16Si-5Cr-4Hf-3Al-xB合金的BSE像[44]
图6  Nb-Si基超高温合金增韧机制[55]
图7  不同Zr含量电弧熔炼Nb-16Si-22Ti-2Al-2Cr合金的力学性能[59]
图8  Nb-Si基超高温合金的抗氧化机制图
图9  添加Zr对Nb-Si基超高温合金高温抗氧化性能的影响[31]

Alloying

element

Main oxide-scale featureProtective effectMain trade-off

Ti[65]

TiO2-containing composite scale, Ti-rich outer layer; can form denser layer at high temperature

Improves compactness at > 1100 oC

Poor efficacy at lower temperatures; clear temperature window

Zr[31,58]

ZrO2 particles/regions; improved continuity of inner SiO2 layerZrO2 fills defects, reduces porosity, stabilizes protective sublayerExcess Zr increases brittle silicide fraction and degrades mechanical balance

Mo[33]

Less porous at suitable content; excessive Mo introduces pores and fast-diffusion pathsOptimizes phase constitution and indirectly retards oxidation at appropriate levelsNarrow beneficial window; overaddition aggravates oxidation via pore formation

Cr[35,66-68,70]

Forms Cr2O3, CrNbO4, or Cr-enriched outer scale; promotes dense external protective layerEnhances compactness and slows inward oxygen diffusionOften sacrifices room temperature toughness

Al[35,68]

Forms relatively dense Al2O3-containing scale; suppresses loose Nb2O5 growthImproves scale continuity, compactness, and oxygen-barrier capabilityReduces Nbss continuity and lowers room-temperature toughness

Ta[39]

Slightly denser scale; in some systems, helps reduce severe scale disruptionIndirectly optimizes phase constitution and oxidation responseVery narrow optimum (~1%, atomic fraction); over-addition reverses the benefit

Hf[42,69]

HfO2-containing scale or dispersed Hf-rich oxides; denser and more adherent multilayer architecture containing scale or dispersed Hf

Markedly improves scale adhesion, suppresses spallation, stabilizes protective layers

Increases density and cost; excessive Hf complicates phase constitution

B[36,44]

Alters oxidation response mainly through microstructure/eutectic modification, not by forming a dominant oxideRefines microstructure and helps construct a more uniform oxidation pathwayVery narrow window; excess B increases silicide fraction, impairing toughness and oxidation balance

Rare-earth element[45-54]

Forms stable rare-earth oxides or complex oxides (e.g., ErNbO4); denser and more adherent scaleReactive element effect: improves adhesion, suppresses cracking/spallation, reduces oxygen diffusion, purifies interfacesEffective only at trace/low levels; over-addition forms coarse oxides/inclusions that degrade integrity
表2  合金元素对Nb-Si基超高温合金氧化行为的影响对比[31,33,35,36,39,42,44~54,58,65~70]
图10  多元合金化协同/负协同设计窗口[40,61,71~74]
图11  Mo与Zr对Nb-Si基超高温合金力学性能及高温抗氧化性能的协同影响[71]

Alloy

combination

Main benefitMain riskBest application target

Zr-Mo[71,75]

Improves phase stability, suppresses Nb3Si, refines microstructure, enhances both toughness and oxidation resistanceNarrow content windows; excess Mo embrittles Nbss and worsens oxidation, excess Zr increases brittle silicideBalanced design for toughness + high- temperature strength + oxidation resistance

Ti-Zr-Hf[40]

Stabilizes favorable silicide constitution, improves phase distribution, retains better strength-toughness balance than single additionsExcess total addition reduces Nbss continuity, raises silicide fraction, increases density/costIntegrated microstructure optimization focusing on phase stability and toughness retention

Cr-Hf[61]

Oxidation-oriented synergy: Cr builds protective external oxides, Hf improves scale adhesion and long-term stabilityStill increases brittle intermetallic fractions; room temperature toughness remains a concern if Cr is too highHigh-temperature oxidation resistance with improved scale stability
Cr-Al[35]Strong oxidation synergy via dense Cr/Al-containing protective scalesweakened Nbss continuity and increased brittle phasesOxidation-prioritized alloy design

Mo-B[73]

Strong high-temperature strengthening synergy via phase regulation + eutectic-path control; overall performance improves with careful B controlB has very narrow safe range; excess B sharply increases brittle silicide, excess Mo narrows toughness marginHigh-temperature strength and microstructure-regulated eutectic design

Zr-Ti[72]

In selected systems, improves room temperature toughness and compressive strength through combined refinement and phase-distribution optimizationBenefits not universal; oxidation benefit is limited and strongly system dependentToughness-oriented or mechanically balanced composition design

Mo-V[74]

May provide selective strengthening in some compositions

Often limited or antagonistic overall benefit; can increase phase complexity and reduce toughness if poorly controlledExploratory strengthening-oriented design, not mainstream balanced route

Ti-Zr-Mo[76]

Combines Ti-assisted phase adjustment, Zr refinement, and Mo-driven Nb3Si suppression; potentially beneficial for overall structural optimizationStrong system dependence; optimum balance shifts with base Si/Ti/Nb ratio and processing routeComprehensive phase-constitution and morphology control

RE-containing multicomponent[77]

Trace RE addition amplifies benefits of other elements via melt purification, interface improvement, oxide-scale stabilization, and microstructural refinementOver-addition introduces oxide inclusions, segregation, or coarse particles, offsetting synergyControlling inclusions, segregation, or coarse particles to preserve synergy
表3  Nb-Si基超高温合金中多组元合金化体系的协同效益、风险及应用目标[35,40,61,71~77]
[1] Bewlay B P, Lewandowksi J J, Jackson M R. Refractory metal-intermetallic in-situ composites for aircraft engines[J]. JOM, 1997, 49(8): 44
[2] Busby J T, Leonard K J. Space fission reactor structural materials: Choices past, present, and future[J]. JOM, 2007, 59(4): 20
[3] Bewlay B P, Jackson M R, Zhao J C, et al. A review of very-high-temperature Nb-silicide-based composites[J]. Metall. Mater. Trans., 2003, 34A: 2043
[4] Bewlay B P, Jackson M R, Zhao J C, et al. Ultrahigh-temperature Nb-silicide-based composites[J]. MRS Bull., 2003, 28: 646
doi: 10.1557/mrs2003.192
[5] Liu W, Huang S, Ye C T, et al. Progress in Nb-Si ultra-high temperature structural materials: A review[J]. J. Mater. Sci. Technol., 2023, 149:127
doi: 10.1016/j.jmst.2022.11.022
[6] Qi C K, Li S R, Liu Y C, et al. Overview of powder forming research on Nb-Si-based ultra-high temperature alloys[J]. Mater. Today Adv., 2024, 24: 100537
[7] Subramanian P R, Mendiratta M G, Dimiduk D M, et al. Advanced intermetallic alloys—Beyond gamma titanium aluminides[J]. Mater. Sci. Eng., 1997, A239-240: 1
[8] Zhu F, Hu P, Ge S W, et al. Research progress of high temperature oxidation behavior of Nb-Si based alloys and their coatings[J]. Rare Met. Mater. Eng., 2023, 52: 4340
[8] 朱 飞, 胡 平, 葛松伟 等. Nb-Si基合金及其涂层的高温氧化行为研究进展[J]. 稀有金属材料与工程, 2023, 52: 4340
[9] Li Z, Peng L M. Microstructural and mechanical characterization of Nb-based in situ composites from Nb-Si-Ti ternary system[J]. Acta Mater., 2007, 55: 6573
doi: 10.1016/j.actamat.2007.08.012
[10] Ding H S, Nie G, Chen R R, et al. Directional solidification of TiAl-W-Si alloy by electromagnetic confinement of melt in cold crucible[J]. Intermetallics, 2012, 31: 264
doi: 10.1016/j.intermet.2012.07.018
[11] Ma X, Guo X P, Fu M S, et al. Crystallographic characteristics of an integrally directionally solidified Nb-Ti-Si based in-situ composite[J]. Scr. Mater., 2017, 139: 108
doi: 10.1016/j.scriptamat.2017.06.035
[12] He D D, Feng Q S, Fu Y X, et al. Erosion behaviors of BaZrO3 and BaZrO3/Y2O3 dual-phase refractories within Nb-Si melts during vacuum induction melting[J]. J. Mater. Res. Technol., 2024, 33: 9726
doi: 10.1016/j.jmrt.2024.12.005
[13] Guo Y L, He J Y, Li Z M, et al. Tuning microstructures and improving oxidation resistance of Nb-Si based alloys via electron beam surface melting[J]. Corros. Sci., 2020, 163: 108281
doi: 10.1016/j.corsci.2019.108281
[14] Orrù R, Licheri R, Locci A M, et al. Consolidation/synthesis of materials by electric current activated/assisted sintering[J]. Mater. Sci. Eng., 2009, R63: 127
[15] Liu W, Sha J B. Failure mode transition of Nb phase from cleavage to dimple/tear in Nb-16Si-based alloys prepared via spark plasma sintering[J]. Mater. Des., 2016, 111: 301
doi: 10.1016/j.matdes.2016.08.087
[16] Li Y L, Lin X, Hu Y L, et al. Microstructure and isothermal oxidation behavior of Nb-Ti-Si-based alloy additively manufactured by powder-feeding laser directed energy deposition[J]. Corros Sci., 2020, 173: 108757
doi: 10.1016/j.corsci.2020.108757
[17] Guo Y L, Jia L N, Sun S B, et al. Rapid fabrication of Nb-Si based alloy by selective laser melting: Microstructure, hardness and initial oxidation behavior[J]. Mater. Des., 2016, 109: 37
doi: 10.1016/j.matdes.2016.07.048
[18] Guo Y L, Jia L N, Kong B, et al. Improvement in the oxidation resistance of Nb-Si based alloy by selective laser melting[J]. Corros Sci., 2017, 127: 260
doi: 10.1016/j.corsci.2017.08.022
[19] Guo H S, Guo X P. Microstructure and microhardness of directionally solidified and heat-treated Nb-Ti-Si based ultrahigh temperature alloy[J]. Trans. Nonferrous Met. Soc. China, 2011, 21: 1283
doi: 10.1016/S1003-6326(11)60854-6
[20] Wang J Y, Jia L N, Ma L M, et al. Microstructure optimization of directionally solidified hypereutectic Nb-Si alloy[J]. Trans. Nonferrous Met. Soc. China, 2013, 23: 2874
doi: 10.1016/S1003-6326(13)62809-5
[21] Liu T, Li T J, Cao Y K, et al. Improvement in the oxidation resistance of Nb-16Si-24Ti-2Al-2Cr alloy by hot pressing[J]. Int. J. Refract. Met. Hard Mater., 2024, 120: 106605
doi: 10.1016/j.ijrmhm.2024.106605
[22] Kumar M D B, Madesh R, Adarsh S J, et al. Recent developments and future perspectives in metal additive manufacturing: Techniques, challenges, and functional performance[J]. J Alloys Compd., 2026, 1064: 187718
doi: 10.1016/j.jallcom.2026.187718
[23] Liu W, Ren X Y, Li N, et al. Rapid directionally solidified microstructure characteristic and fracture behaviour of laser melting deposited Nb-Si-Ti alloy[J]. Prog. Nat. Sci. Mater. Int., 2021, 31: 113
doi: 10.1016/j.pnsc.2020.12.003
[24] Li M, Kang Y W, Guo F W. Research progress in manufacturing technology of Nb-Si based ultra-high temperature structural materials[J]. J. Mater. Eng., 2020, 48: 58
doi: 10.11868/j.issn.1001-4381.2020.000284
[25] Sha J B, Hirai H, Tabaru T, et al. High-temperature strength and room-temperature toughness of Nb-W-Si-B alloys prepared by arc-melting[J]. Mater. Sci. Eng., 2004, A364: 151
[26] Sun Z P, Guo X P, He Y S, et al. Investigation on the as-cast microstructure of Nb-Nb silicide based multicomponent alloys[J]. Intermetallics, 2010, 18: 992
doi: 10.1016/j.intermet.2010.01.024
[27] Sala K, Mitra R. Effect of Ti addition and microstructural evolution on toughening and strengthening behavior of as cast or annealed Nb-Si-Mo based hypoeutectic and hypereutectic alloys[J]. Metall. Mater. Trans., 2021, 52A: 3436
[28] Li Y L, Lin X, Hu Y L, et al. Precipitation behavior of Nb-Si-based in-situ composite manufactured by laser directed energy deposition[J]. Scr. Mater., 2022, 207: 114288
doi: 10.1016/j.scriptamat.2021.114288
[29] Li Y L, Lin X, Hu Y L, et al. Zirconium modified Nb-22Ti-16Si alloys fabricated by laser additive manufacturing: Microstructure and fracture toughness[J]. J. Alloys Compd., 2019, 783: 66
doi: 10.1016/j.jallcom.2018.12.280
[30] Sankar M, Phanikumar G, Satya Prasad V V. Effect of Zr addition on the mechanical properties of Nb-Si based alloys[J]. Mater. Sci. Eng., 2019, A754: 224
[31] Zhang S N, Jia L N, Guo Y L, et al. Improvement in the oxidation resistance of Nb-Si-Ti based alloys containing zirconium[J]. Corros. Sci., 2020, 163: 108294
doi: 10.1016/j.corsci.2019.108294
[32] Xu Q, Ma X H, Wang Q, et al. Formation of (Nb, X)ss/β-(Nb, X)5Si3 eutectic and its effect on mechanical properties of Nb-Si-Ti alloys by addition of Mo[J]. Mater. Today Commun., 2025, 42: 111556
[33] Ma R, Guo X P. Influence of molybdenum contents on the microstructure, mechanical properties and oxidation behavior of multi-elemental Nb-Si based ultrahigh temperature alloys[J]. Intermetallics, 2021, 129: 107053
doi: 10.1016/j.intermet.2020.107053
[34] Wang Q, Wang X W, Chen R R, et al. Microstructure evolution and fracture toughness of Nb-Si-Ti based alloy with Cr, Mo and W elements addition[J]. Intermetallics, 2022, 140: 107408
doi: 10.1016/j.intermet.2021.107408
[35] Su L F, Jia L N, Jiang K Y, et al. The oxidation behavior of high Cr and Al containing Nb-Si-Ti-Hf-Al-Cr alloys at 1200 and 1250 oC[J]. Int. J. Refract. Met. Hard Mater., 2017, 69: 131
doi: 10.1016/j.ijrmhm.2017.08.006
[36] Portillio B I, Varma S K. Oxidation behavior of Nb-20Mo-15Si-25Cr and Nb-20Mo-15Si-25Cr-5B alloys[J]. Metall. Mater. Trans., 2012, 43A: 147
[37] Sha J, Yang C, Liu J. Toughening and strengthening behavior of an Nb-8Si-20Ti-6Hf alloy with addition of Cr[J]. Scr. Mater., 2010, 62: 859
doi: 10.1016/j.scriptamat.2010.02.023
[38] Sun Z P, Guo J M, Zhang C, et al. Effect of Ti and Al interaction on microstructures and mechanical properties of the Nb-Ti-Si-Al alloys[J]. Rare Met. Mater. Eng., 2016, 45: 1678
doi: 10.1016/S1875-5372(16)30139-4
[39] Yu J Y, Chen D Z, Xu F D, et al. Simultaneous improving high temperature oxidation resistance and room temperature toughness of Nb-Si based alloy via appropriate Ta content addition strategy[J]. Int. J. Refract. Met. Hard Mater., 2024, 124: 106800
doi: 10.1016/j.ijrmhm.2024.106800
[40] Wang Q, Zhao T Y, Chen R R, et al. Collaborative optimization of microstructure, phase composition and room-temperature fracture toughness of Nb-Si based alloys using Ti, Zr and Hf elements[J]. Trans. Nonferrous Met. Soc. China, 2024, 34: 194
doi: 10.1016/S1003-6326(23)66391-5
[41] Li Z F, Tsakiropoulos P. On the microstructures and hardness of the Nb-24Ti-18Si-5Al-5Cr-5Ge and Nb-24Ti-18Si-5Al-5Cr-5Ge-5Hf (at.%) silicide based alloys[J]. Materials, 2019, 12: 2655
doi: 10.3390/ma12172655
[42] Vazquez A, Varma S K. High-temperature oxidation behavior of Nb-Si-Cr alloys with Hf additions[J]. J. Alloys Compd., 2011, 509: 7027
doi: 10.1016/j.jallcom.2011.02.174
[43] Wang X W, Wang Q, Chen R R, et al. Improved microstructure and mechanical properties of Nb-Si in situ composites: Focus on interstitial element B doping, atomic diffusion and dislocation behaviors[J]. Mater. Sci. Eng., 2025, A946: 149097
[44] Zhang S, Guo X P. Effects of B addition on the microstructure and properties of Nb silicide based ultrahigh temperature alloys[J]. Intermetallics, 2015, 57: 83
doi: 10.1016/j.intermet.2014.10.007
[45] Guo J T, Zhou L Z, Tian Y X, et al. Effect of Hf, Sn, Ta, Zr, Dy and Ho on microstructure and mechanical properties of Nb-Nb5Si3 alloy[J]. Acta Metall. Sin., 2015, 51: 815
[45] 郭建亭, 周兰章, 田玉新 等. 合金元素Hf, Sn, Ta, Zr, Dy和Ho对Nb-Nb5Si3合金组织和力学性能的影响[J]. 金属学报, 2015, 51: 815
[46] Tian Y X, Guo J T, Zhou L Z, et al. Effect of Dy addition on microstructure and mechanical properties of Nb-Nb5Si3 eutectic alloy[J]. Acta Metall. Sin., 2008, 44: 589
[46] 田玉新, 郭建亭, 周兰章 等. Dy对Nb-Nb5Si3共晶合金显微组织和力学性能的影响[J]. 金属学报, 2008, 44: 589
[47] Chen D Z, Wang Q, Chen R R, et al. An as-cast Nb-Si-based alloy with fine-grains and remarkable fracture toughness by minor Sc addition[J]. J. Alloys Compd., 2022, 895: 162707
doi: 10.1016/j.jallcom.2021.162707
[48] Chen D Z, Wang Y X, Yu J Y, et al. Er-induced microstructural refinement and internal oxidation enhancing fracture toughness in Nb-Si alloys[J]. J. Alloys Compd., 2025, 1045: 184777
doi: 10.1016/j.jallcom.2025.184777
[49] Cui X Y, Chen D Z, Xu F D, et al. Investigating scandium-alloyed Nb-Si systems: Microstructure, oxidation behavior, and fracture toughness[J]. Mater. Charact., 2024, 217: 114409
doi: 10.1016/j.matchar.2024.114409
[50] Guo Y L, Jia L N, Zhang H R, et al. Enhancing the oxidation resistance of Nb-Si based alloys by yttrium addition[J]. Intermetallics, 2018, 101: 165
doi: 10.1016/j.intermet.2018.08.004
[51] Wang X W, Wang Q, Chen R R, et al. Gadolinium doping induced the microstructure evolution and mechanical properties improvement of Nb-Si based in-situ superalloy[J]. J. Alloys Compd., 2024, 1004: 175942
doi: 10.1016/j.jallcom.2024.175942
[52] Wang Y, Jia L N, Sun G X, et al. Synchronous improvement in room-temperature fracture toughness and high-temperature oxidation resistance of Nb-Si based alloys with erbium addition[J]. Int. J. Refract. Met. Hard Mater., 2021, 94: 105359
doi: 10.1016/j.ijrmhm.2020.105359
[53] Wei W, Wang Q, Chen R R, et al. Improved toughness and oxidation resistance of Nb-Si based ultra-high temperature alloys by in-situ generated La2O3 phase[J]. Mater. Charact., 2024, 208: 113686
doi: 10.1016/j.matchar.2024.113686
[54] Yin X Y, Li X X, Sun H, et al. Fine microstructure, better compactness, and significant fracture toughness of multi-component Nb-Si based alloy by an appropriate amount of yttrium addition during the laser melting deposition[J]. Int. J. Refract. Met. Hard Mater., 2026, 137: 107655
doi: 10.1016/j.ijrmhm.2026.107655
[55] Launey M E, Ritchie R O. On the fracture toughness of advanced materials[J]. Adv. Mater., 2009, 21: 2103
doi: 10.1002/adma.v21:20
[56] Chan K S, Davidson D L. Effects of Ti addition on cleavage fracture in Nb-Cr-Ti solid-solution alloys[J]. Metall. Mater. Trans., 1999, 30A: 925
[57] Li Y L, Lin X, Hu Y L, et al. Microstructure and fracture toughness of a Nb-Ti-Si-based in-situ composite fabricated by laser-based directed energy deposition[J]. Composites, 2024, 278B: 111427
[58] Qiao Y Q, Guo X P, Zeng Y X. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys[J]. Intermetallics, 2017, 88: 19
doi: 10.1016/j.intermet.2017.04.008
[59] Li Z B, Luo L S, Wang B B, et al. The microstructural characteristics and mechanical properties of Nb-16Si-22Ti-2Al-2Cr alloys with Zr addition[J]. Mater. Sci. Eng., 2023, A880: 145305
[60] Li Y L, Lin X, Hu Y L, et al. The effect of Mo on microstructure and mechanical properties of Nb-22Ti-16Si alloy additively manufactured via laser directed energy deposition[J]. J. Alloys Compd., 2021, 858: 158143
doi: 10.1016/j.jallcom.2020.158143
[61] Zhang S, Guo X P. Effects of Cr and Hf additions on the microstructure and properties of Nb silicide based ultrahigh temperature alloys[J]. Mater. Sci. Eng., 2015, A638: 121
[62] Guo Y L, Jia L N, Kong B, et al. Microstructure and fracture toughness of Nb-Si based alloys with Ta and W additions[J]. Intermetallics, 2018, 92: 1
doi: 10.1016/j.intermet.2017.09.005
[63] Tian Y X, Guo J T, Zhou L Z, et al. Microstructure and room temperature fracture toughness of cast Nbss/silicides composites alloyed with Hf[J]. Mater. Lett., 2008, 62: 2657
doi: 10.1016/j.matlet.2008.01.007
[64] Kim J H, Tabaru T, Sakamoto M, et al. Mechanical properties and fracture behavior of an Nbss/Nb5Si3 in-situ composite modified by Mo and Hf alloying[J]. Mater. Sci. Eng., 2004, A372: 137
[65] Sala K, Kashyap S K, Mitra R. Effect of Ti addition on the kinetics and mechanism of non-isothermal and isothermal oxidation of Nb-Si-Mo alloys at 900 oC-1200 oC[J]. Intermetallics, 2021, 138: 107338
doi: 10.1016/j.intermet.2021.107338
[66] Yao D Z, Zhou C G, Yang J Y, et al. Experimental studies and modeling of the oxidation of multiphase niobium-base alloys[J]. Corros. Sci., 2009, 51: 2619
doi: 10.1016/j.corsci.2009.06.053
[67] Li Y L, Lin X, Zhao Z Y, et al. Investigation on the composite effect of Zr and Cr on oxidation behavior and fracture toughness of Nb-Ti-Si-based alloys manufactured by directed energy deposition[J]. Mater. Charact., 2024, 214: 114078
doi: 10.1016/j.matchar.2024.114078
[68] Shen F Q, Yu L H, Fu T, et al. Effect of the Al, Cr and B elements on the mechanical properties and oxidation resistance of Nb-Si based alloys: A review[J]. Appl. Phys., 2021, 127A: 852
[69] Li N, Zhang B D, Huang H, et al. Discussion of effects of Hf on the high temperature oxidation of Nb-based alloy[J]. New Technol. New Process, 2015, (4): 103
[69] 李 宁, 张宝东, 黄 辉 等. 铪提高铌硅基合金高温抗氧化性能的机理探讨[J]. 新技术新工艺, 2015, (4): 103
[70] Li Y L, Lin X, Hu Y L, et al. Alloying on the high-temperature oxidation behavior of Nb-Ti-Si-based alloy additively manufactured by laser directed energy deposition[J]. Int. J. Refract. Met. Hard Mater., 2024, 121: 106682
doi: 10.1016/j.ijrmhm.2024.106682
[71] Ma R, Guo X P. Effects of Mo and Zr composite additions on the microstructure, mechanical properties and oxidation resistance of multi-elemental Nb-Si based ultrahigh temperature alloys[J]. J. Alloys Compd., 2021, 870: 159437
doi: 10.1016/j.jallcom.2021.159437
[72] Sun A K, Dong Z Q, Yang S, et al. Effect of Zr and Ti on isothermal oxidation behavior of Nb-Si based alloys[J]. Prog. Nat. Sci. Mater. Int., 2022, 32: 226
doi: 10.1016/j.pnsc.2022.02.004
[73] Li Z B, Luo L S, Wang B B, et al. Cooperative effects of Mo and B additions on the microstructure and mechanical properties of multi-elemental Nb-Si-Ti based alloys[J]. Mater. Charact., 2023, 206: 113421
doi: 10.1016/j.matchar.2023.113421
[74] Ma R, Guo X P. Cooperative effects of Mo, V and Zr additions on the microstructure and properties of multi-elemental Nb-Si based alloys[J]. J. Mater. Sci. Technol., 2023, 132: 27
doi: 10.1016/j.jmst.2022.06.006
[75] Li Y L, Lin X, Hu Y L, et al. Seynergistic effect of Mo and Zr additions on microstructure and mechanical properties of Nb-Ti-Si-based alloys additively manufactured by laser directed energy deposition[J]. J. Mater. Sci. Technol., 2022, 103: 84
doi: 10.1016/j.jmst.2021.06.027
[76] Prasad S, Paul A. Growth mechanism of the Nb(X)Si2 and [Nb(X)]5Si3 phases by reactive diffusion in Nb (X = Ti, Mo, or Zr)-Si systems[J]. Intermetallics, 2012, 22: 210
doi: 10.1016/j.intermet.2011.11.012
[77] Sun G X, Jia L N, Ye C T, et al. Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb-Si based alloys[J]. Intermetallics, 2021, 133: 107172
doi: 10.1016/j.intermet.2021.107172
[78] Liu G X, Jia L N, Kong B, et al. Artificial neural network application to study quantitative relationship between silicide and fracture toughness of Nb-Si alloys[J]. Mater. Des., 2017, 129: 210
doi: 10.1016/j.matdes.2017.05.027
[79] Ma E, Shin S H, Choi W, et al. Machine learning approach for predicting the fracture toughness of Nb-Si based alloys[J]. Int. J. Refract. Met. Hard Mater., 2023, 117: 106420
doi: 10.1016/j.ijrmhm.2023.106420
[80] Yin X Y, Liang J, Liu C, et al. Accelerating the design of multivariate Nb-Si based alloys with excellent strength and toughness matching through machine learning[J]. Next Mater., 2025, 6: 100294
[81] Liu G X, Jia L N, Kong B, et al. Artificial neural network application to microstructure design of Nb-Si alloy to improve ultimate tensile strength[J]. Mater. Sci. Eng., 2017, A707: 452
[1] 程锋, 吕皓, 刘雪梅, 宋晓艳. Ti掺杂的SmFe12 基纳米晶永磁合金物相组成和组织性能[J]. 金属学报, 2026, 62(10): 1727-1736.
[2] 朱满, 张成, 许军锋, 坚增运, 惠增哲. CrNbTiVAl x 难熔高熵合金的组织、力学性能和高温氧化行为[J]. 金属学报, 2025, 61(1): 88-98.
[3] 唐景韬, 姚英杰, 张游游, 吴文华, 李宇博, 陈浩, 杨志刚. 高强钢中亚稳奥氏体对断裂韧性影响的研究进展[J]. 金属学报, 2025, 61(1): 77-87.
[4] 谷瑞成, 张健, 张明阳, 刘艳艳, 王绍钢, 焦大, 刘增乾, 张哲峰. 三维互穿结构SiC晶须骨架增强镁基复合材料制备及其力学性能[J]. 金属学报, 2022, 58(7): 857-867.
[5] 胡晨, 潘帅, 黄明欣. 高强高韧异质结构温轧TWIP钢[J]. 金属学报, 2022, 58(11): 1519-1526.
[6] 陈瑞润, 陈德志, 王琪, 王墅, 周哲丞, 丁宏升, 傅恒志. Nb-Si基超高温合金及其定向凝固工艺的研究进展[J]. 金属学报, 2021, 57(9): 1141-1154.
[7] 白静, 石少锋, 王锦龙, 王帅, 赵骧. Ni-Mn-Ga-Ti铁磁形状记忆合金的相稳定性和磁性能的第一性原理计算[J]. 金属学报, 2019, 55(3): 369-375.
[8] 李一哲, 龚宝明, 刘秀国, 王东坡, 邓彩艳. 面外拘束效应对单边缺口拉伸试样断裂韧性的影响[J]. 金属学报, 2018, 54(12): 1785-1791.
[9] 白静,李泽,万震,赵骧. Ni-Mn-Ga-Cu铁磁形状记忆合金的晶体结构、相稳定性和磁性能的第一性原理研究[J]. 金属学报, 2017, 53(1): 83-89.
[10] 冯祥利,王磊,刘杨. Q460钢焊接接头组织及动态断裂行为的研究*[J]. 金属学报, 2016, 52(7): 787-796.
[11] 沈勇,徐坚. Zr46.9Cu45.5Al5.6Y2.0金属玻璃含B2-CuZr相内生复合材料的制备及其力学性能*[J]. 金属学报, 2015, 51(11): 1407-1415.
[12] 朱振东,徐坚. Cu56Hf27Ti17块体金属玻璃的缺口韧性[J]. 金属学报, 2013, 49(8): 969-975.
[13] 毕宗岳,杨军,牛靖,张建勋. X100高强管线钢焊接接头的断裂韧性[J]. 金属学报, 2013, 49(5): 576-582.
[14] 孙茜,王晓南,章顺虎,杜林秀,邸洪双. 显微组织对新型热轧纳米析出强化钢断裂韧性的影响[J]. 金属学报, 2013, 49(12): 1501-1507.
[15] 贾晓娇 张军 苏海军 宋衎 刘林 傅恒志. 激光悬浮区熔Al2O3基共晶自生复合材料微观组织与力学性能[J]. 金属学报, 2012, 48(12): 1479-1486.