|
|
NM500耐磨钢拉伸过程中TiN的破碎机制 |
吴翔,左秀荣(),赵威威,王中洋 |
郑州大学材料物理教育部重点实验室 郑州 450052 |
|
Mechanism of TiN Fracture During the Tensile Process of NM500 Wear-Resistant Steel |
WU Xiang,ZUO Xiurong(),ZHAO Weiwei,WANG Zhongyang |
Key Laboratory of Material Physics, Ministry of Education, Zhengzhou University, Zhengzhou 450052, China |
引用本文:
吴翔,左秀荣,赵威威,王中洋. NM500耐磨钢拉伸过程中TiN的破碎机制[J]. 金属学报, 2020, 56(2): 129-136.
Xiang WU,
Xiurong ZUO,
Weiwei ZHAO,
Zhongyang WANG.
Mechanism of TiN Fracture During the Tensile Process of NM500 Wear-Resistant Steel[J]. Acta Metall Sin, 2020, 56(2): 129-136.
[1] | Ryabov V V, Kniaziuk T V, Mikhailov M S, et al. Structure and properties of new wear-resistant steels for agricultural machine building [J]. Inorg. Mater. Appl. Res., 2017, 8: 827 | [2] | Ojala N, Valtonen K, Heino V, et al. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels [J]. Wear, 2014, 317: 225 | [3] | Jiang Z Q, Fu H G, Yin E S, et al. Investigation and application of high strength low alloy wear resistant cast steel [J]. Mater. Technol., 2011, 26: 58 | [4] | Rendón J, Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods [J]. Wear, 2009, 267: 2055 | [5] | Jha A K, Prasad B K, Modi O P, et al. Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel [J]. Wear, 2003, 254: 120 | [6] | Nikitin V N, Nastich S Y, Smirnov L A, et al. Economically alloyed high-strength steel for use in mine equipment [J]. Steel Trans., 2016, 46: 742 | [7] | Shi C B, Liu W J, Li J, et al. Effect of boron on the hot ductility of low-carbon Nb-Ti-microalloyed steel [J]. Mater. Trans., 2016, 57: 647 | [8] | Mu W Z, J?nsson P G, Shibata H, et al. Inclusion and microstructure characteristics in steels with TiN additions [J]. Steel Res. Int., 2016, 87: 339 | [9] | Jin Y L, Du S L. Precipitation behaviour and control of TiN inclusions in rail steels [J]. Ironmak. Steelmak., 2018, 45: 224 | [10] | Fu J W, Qiu W X, Nie Q Q, et al. Precipitation of TiN during solidification of AISI 439 stainless steel [J]. J. Alloys Compd., 2017, 699: 938 | [11] | Yan W, Shan Y Y, Yang K. Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steels [J]. Metall. Mater. Trans., 2006, 37A: 2147 | [12] | Chen K, Du D H, Lu H, et al. Effect of TiN inclusion on fatigue crack growth behavior of alloy 690 tube [J]. Rare Met. Mater. Eng., 2018, 47: 1180 | [12] | (陈 凯, 杜东海, 陆 辉等. TiN夹杂物对690合金传热管疲劳裂纹扩展行为的影响 [J]. 稀有金属材料与工程, 2018, 47: 1180) | [13] | Hulka K, Kern A, Schriever U. Application of niobium in quenched and tempered high-strength steels [J]. Mater. Sci. Forum, 2005, 500-501: 519 | [14] | Singh U P, Popli A M, Jain D K, et al. Influence of microalloying on mechanical and metallurgical properties of wear resistant coach and wagon wheel steel [J]. J. Mater. Eng. Perform., 2003, 12: 573 | [15] | Xie Z J, Shang C J, Wang X L, et al. Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering [J]. Mater. Sci. Eng., 2018, A727: 200 | [16] | Pandey C, Saini N, Mahapatra M M, et al. Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes [J]. Eng. Failure Anal., 2017, 71: 131 | [17] | Nohava J, Hau?ild P, Karlík M, et al. Electron backscattering diffraction analysis of secondary cleavage cracks in a reactor pressure vessel steel [J]. Mater. Charact., 2002, 49: 211 | [18] | Kang Y, Mao W M, Chen Y J, et al. Effect of Ti content on grain size and mechanical properties of UNS S44100 ferritic stainless steel [J]. Mater. Sci. Eng., 2016, A677: 211 | [19] | Prikryl M, Kroupa A, Weatherly G C, et al. Precipitation behavior in a medium carbon, Ti-V-N microalloyed steel [J]. Metall. Mater. Trans., 1996, 27A: 1149 | [20] | Fairchild D P, Howden D G, Clark W A T. The mechanism of brittle fracture in a microalloyed steel: Part I. Inclusion-induced cleavage [J]. Metall. Mater. Trans., 2000, 31A: 641 | [21] | Inoue K, Ohnuma I, Ohtani H, et al. Solubility product of TiN in austenite [J]. ISIJ Int., 1998, 38: 991 | [22] | Guo W Y, Hu X Q, Ma X P, et al. Effect of TiN precipitates on solidification microstructure of medium carbon Cr-Mo wear resistant steel [J]. Acta Metall. Sin., 2016, 52: 769 | [22] | (郭文营, 胡小强, 马晓平等. TiN析出相对中碳Cr-Mo耐磨钢凝固组织的影响 [J]. 金属学报, 2016, 52: 769) | [23] | Lan L Y, Qiu C L, Zhao D W, et al. Microstructural characters and toughness of different sub-regions in the welding heat affected zone of low carbon bainitic steel [J]. Acta Metall. Sin., 2011, 47: 1046 | [23] | (兰亮云, 邱春林, 赵德文等. 低碳贝氏体钢焊接热影响区中不同亚区的组织特征与韧性 [J]. 金属学报, 2011, 47: 1046) | [24] | Wang C F, Wang M Q, Shi J, et al. Effect of microstructural refinement on the toughness of low carbon martensitic steel [J]. Scr. Mater., 2008, 58: 492 | [25] | Yan P, Liu Z D, Bao H S, et al. Effect of tempering temperature on the toughness of 9Cr-3W-3Co martensitic heat resistant steel [J]. Mater. Des., 2014, 54: 874 | [26] | Zhou T, Yu H, Wang S Y. Effect of microstructural types on toughness and microstructural optimization of ultra-heavy steel plate: EBSD analysis and microscopic fracture mechanism [J]. Mater. Sci. Eng., 2016, A658: 150 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|