|
|
热压烧结温度对SiC/Al-Zn-Mg-Cu复合材料微观结构与力学性能的影响 |
马国楠1,2,王东1(),刘振宇1,毕胜1,2,昝宇宁1,2,肖伯律1,马宗义1 |
1. 中国科学院金属研究所沈阳材料科学国家研究中心 沈阳 110016 2. 中国科学技术大学材料科学与工程学院 沈阳 110016 |
|
Effect of Hot Pressing Temperature on Microstructure and Tensile Properties of SiC/Al-Zn-Mg-Cu Composites |
MA Guonan1,2,WANG Dong1(),LIU Zhenyu1,BI Sheng1,2,ZAN Yuning1,2,XIAO Bolv1,MA Zongyi1 |
1. Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China |
引用本文:
马国楠, 王东, 刘振宇, 毕胜, 昝宇宁, 肖伯律, 马宗义. 热压烧结温度对SiC/Al-Zn-Mg-Cu复合材料微观结构与力学性能的影响[J]. 金属学报, 2019, 55(10): 1319-1328.
Guonan MA,
Dong WANG,
Zhenyu LIU,
Sheng BI,
Yuning ZAN,
Bolv XIAO,
Zongyi MA.
Effect of Hot Pressing Temperature on Microstructure and Tensile Properties of SiC/Al-Zn-Mg-Cu Composites[J]. Acta Metall Sin, 2019, 55(10): 1319-1328.
[1] | Song J Y, Guo Q, Ouyang Q B, et al. Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al-Zn-Mg-Cu composites [J]. Mater. Sci. Eng., 2015, A644: 79 | [2] | Xiao B L, Huang Z Z, Ma K, et al. Research on hot deformation behaviors of discontinuously reinforced aluminum composites [J]. Acta Metall. Sin., 2019, 55: 59 | [2] | (肖伯律, 黄治治, 马 凯等. 非连续增强铝基复合材料的热变形行为研究进展 [J]. 金属学报, 2019, 55: 59) | [3] | Li B, Luo B H, He K J ,et al. Effect of aging on interface characteristics of Al-Mg-Si/SiC composites [J]. J. Alloys Compd., 2015, 649: 495 | [4] | Monazzah A H, Pouraliakbar H, Bagheri R ,et al. Al-Mg-Si/SiC laminated composites: Fabrication, architectural characteristics, toughness, damage tolerance, fracture mechanisms [J]. Composites, 2017, 125B: 49 | [5] | Wang Z G, Li C P, Wang H Y, et al. Aging behavior of Nano-SiC/2014Al composite fabricated by powder metallurgy and hot extrusion techniques [J]. J. Mater. Sci. Technol., 2016, 32: 1008 | [6] | Jin P, Xiao B L, Wang Q Z ,et al. Effect of solution temperature on aging behavior and properties of SiCp/Al-Cu-Mg composites [J]. Mater. Sci. Eng., 2011, A528: 1504 | [7] | Kalkanl? A, Y?lmaz S. Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates [J]. Mater. Des., 2008, 29: 775 | [8] | Sharma M M, Amateau M F, Eden T J. Aging response of Al-Zn-Mg-Cu spray formed alloys and their metal matrix composites [J]. Mater. Sci. Eng., 2006, A424: 87 | [9] | Min K H, Lee B H, Chang S Y ,et al. Mechanical properties of sintered 7xxx series Al/SiCp composites [J]. Mater. Lett., 2007, 61: 2544 | [10] | Dasgupta R, Meenai H. SiC particulate dispersed composites of an Al-Zn-Mg-Cu alloy: Property comparison with parent alloy [J]. Mater. Charact., 2005, 54: 438 | [11] | Kumar N V R, Dwarakadasa E S. Effect of matrix strength on the mechanical properties of Al-Zn-Mg/SiCp composites [J]. Composites, 2000, 31A: 1139 | [12] | Manoharan M, Lewandowski J J. Effect of reinforcement size and matrix microstructure on the fracture properties of an aluminum metal matrix composite [J]. Mater. Sci. Eng., 1992, A150: 179 | [13] | Evans R D, Boyd J D. Near-interface microstructure in a SiC/Al composite [J]. Scr. Mater., 2003, 49: 59 | [14] | Hong S H, Chung K H. Effects of vacuum hot pressing parameters on the tensile properties and microstructures of SiC-2124 A1 composites [J]. Mater. Sci. Eng., 1995, A194: 165 | [15] | Cheng N P, Zeng S M, Wang S B ,et al. Effects of forming temperature on properties of SiCP/Al composite [J]. Hot Work. Technol., 2007, 32(2): 13 | [15] | (程南璞, 曾苏民, 王水兵等. 成形温度对SiCP/Al复合材料性能的影响 [J]. 热加工工艺, 2007, 32(2): 13) | [16] | Li Y Z, Wang Q Z, Wang W G, et al. Interfacial reaction mechanism between matrix and reinforcement in B4C/6061Al composites [J]. Mater. Chem. Phys., 2015, 154: 107 | [17] | Ma W C, Gu J L, Zhang Y ,et al. Effect of SiC particles on ageing behaviour of SiCp/7075 composites [J]. J. Mater. Sci. Lett., 1997, 16: 1867 | [18] | Lee K B, Kwon H. Strength of Al-Zn-Mg-Cu matrix composite reinforced with SiC particles [J]. Metall. Mater. Trans., 2002, 33A: 455 | [19] | Thébaud F, Hervé E, Da Silva R ,et al. The effect of the interfacial strength on the overall mechanical properties of particle reinforced metal matrix composites [A]. 2nd International Conference on Interfacial Phenomena in Composite Materials [C]. Louvain, Belgium, 1991: 179 | [20] | Man C F, Mummery P M, Derby B, et al. The influence of magnesium segregation on the fracture of silicon carbide particle-reinforced aluminium metal matrix composites [A]. 2nd International Conference on Interfacial Phenomena in Composite Materials [C]. Louvain, Belgium, 1991: 175 | [21] | Liu Z Y, Wang Q Z, Xiao B L ,et al. Effects of double extrusion on the microstructure and tensile property of the PM processed SiCp/2009Al composites [J]. Acta Metall. Sin., 2010, 46: 1121 | [21] | (刘振宇, 王全兆, 肖伯律等. 二次挤压对SiCp/2009Al复合材料微观结构和力学性能的影响 [J]. 金属学报, 2010, 46: 1121) | [22] | Ogel B, Gurbuz R. Microstructural characterization and tensile properties of hot pressed Al-SiC composites prepared from pure Al and Cu powders [J]. Mater. Sci. Eng., 2001, A301: 213 | [23] | Zhou J, Duszczyk J. Liquid phase sintering of an AA2014-based composite prepared from an elemental powder mixture [J]. J. Mater. Sci., 1999, 34: 545 | [24] | Zhang Q, Wang Q Z, Xiao B L, et al. Phases and elemental distributions in SiCp/Al-Cu-Mg composite fabricated by powder metallurgy [J]. Acta Metall. Sin., 2012, 48: 135 | [24] | (张 琪, 王全兆, 肖伯律等. 粉末冶金制备SiCp/2009Al复合材料的相组成和元素分布 [J]. 金属学报, 2012, 48: 135) | [25] | Li B, Pan Q L, Chen C P ,et al. Effects of solution treatment on microstructural and mechanical properties of Al-Zn-Mg alloy by microalloying with Sc and Zr [J]. J. Alloys Compd., 2016, 664: 553 | [26] | Wang D, Xiao B L, Wang Q Z ,et al. Evolution of the microstructure and strength in the nugget zone of friction stir welded SiCp/Al-Cu-Mg composite [J]. J. Mater. Sci. Technol., 2014, 30: 54 | [27] | Kiourtsidis G E, Skolianos S M, Litsardakis G A. Aging response of aluminium alloy 2024/silicon carbide particles (SiCp) composites [J]. Mater. Sci. Eng., 2004, A382: 351 | [28] | Ure?a A, Mart??nez E E, Rodrigo P ,et al. Oxidation treatments for SiC particles used as reinforcement in aluminium matrix composites [J]. Compos. Sci. Technol., 2004, 64: 1843 | [29] | McLeod A D, Gabryel C M. Kinetics of the growth of spinel, MgAl2O4, on alumina particulate in aluminum alloys containing magnesium [J]. Metall. Mater. Trans., 1992, 23A: 1279 | [30] | Strangwood M, Hippsley C A, Lewandowski J J. Segregation to SiC/Al interfaces in Al based metal matrix composites [J]. Scr. Metall. Mater., 1990, 24: 1483 | [31] | Shi Z L, Ochiai S, Hojo M ,et al. The oxidation of SiC particles and its interfacial characteristics in Al-matrix composite [J]. J. Mater. Sci., 2001, 36: 2441 | [32] | Jin P, Xiao B L, Wang Q Z ,et al. Effect of hot pressing temperature on microstructure and mechanical properties of SiC particle reinforced aluminum matrix composites [J]. Acta Metall. Sin., 2011, 47: 298 | [32] | (金 鹏, 肖伯律, 王全兆等. 热压烧结温度对SiC颗粒增强铝基复合材料微观组织及力学性能的影响 [J]. 金属学报, 2011, 47: 298) | [33] | Shin K, Chung D S, Lee S. The effect of consolidation temperature on microstructure and mechanical properties in powder metallurgy-processed 2XXX aluminum alloy composites reinforced with SiC particulates [J]. Metall. Mater. Trans., 1997, 28 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|