Please wait a minute...
Acta Metall Sin  2009, Vol. 45 Issue (4): 410-414    DOI:
论文 Current Issue | Archive | Adv Search |
SYNTHESIS OF PLASTIC Zr–BASED BULK METALLIC GLASS WITH CRYSTAL PHASE BY DIRECTIONAL SOLIDIFICATION
QIAO Junwei; ZHANG Yong; CHEN Guoliang
State Key Laboratory for Advanced Metals and Materials; University of Science and Technology Beijing; Beijing 100083
Cite this article: 

QIAO Junwei ZHANG Yong CHEN Guoliang. SYNTHESIS OF PLASTIC Zr–BASED BULK METALLIC GLASS WITH CRYSTAL PHASE BY DIRECTIONAL SOLIDIFICATION. Acta Metall Sin, 2009, 45(4): 410-414.

Download:  PDF(2433KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Plastic Zr58.5Ti14.3Nb5.2Cu6.1Ni4.9Be11.0 bulk metallic glass matrix composites containing uniformly distributed dendrites in the glass matrix were synthesized by the Bridgman solidification methold. Through tailoring the withdrawal velocity, the volume fraction of dendrites with characteristic spanning length, as well as the mechanical properties of the samples can change. The characteristic spanning length of the individual dendrites roughly obeys linear relationship with the withdrawal velocity. The compressive ultimate strength and the fracture strain of the sample reached 1930 MPa and 11.3%, respectively, when the withdrawal velocity was 1.0 mm/s.

Key words:  Zr--based bulk metallic glass      composite      unidirectional solidification      mechanical property     
Received:  15 October 2008     
ZTFLH: 

TB331

 
  TG113.25

 
Fund: 

Supported by National Basic Research Program of China (No.2007CB613903) and National Natural Science Foundation of China (No.50571018)

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2009/V45/I4/410

[1] Peker A, Johnson W L. Appl Phys Lett, 1993; 63: 2342
[2] Inoue A, Zhang T. Mater Trans JIM, 1996; 37: 185
[3] Bian Z, Chen G L, He G, Hui X D. Mater Sci Eng, 2001; A316: 135
[4] Liu Y H, Wang G, Wang R J, Zhao D Q, Pan M X, Wang W H. Science, 2007; 315: 1385
[5] Wang G Y, Liaw P K, Yokoyama Y, Inoue A, Liu C T. Mater Sci Eng, 2008; A494: 314
[6] Hays C C, Kim C P, Johnson W L. Phys Rev Lett, 2000; 84: 2901
[7] Fan C, Ott R T, Hufnagel T C. Appl Phys Lett, 2002; 81: 1020
[8] Fan C, Li H Q, Kecskes L J, Tao K X, Choo H, Liaw P K, Liu C T. Phys Rev Lett, 2006; 96: 145506
[9] Tan H, Zhang Y, Li Y. Intermetallics, 2002; 10: 1203
[10] Tan H, Zhang Y, Ma D, Feng Y P, Li Y. Acta Mater, 2003; 51: 4551
[11] Tan H, Zhang Y, Hu X, Feng Y P, Li Y. Mater Sci Eng, 2004; A375–377: 40
[12] Zhang Y, Xu W, Tan H, Li Y. Acta Mater, 2005; 53: 2607
[13] Sun G Y, Chen G, Chen G L. Acta Metall Sin, 2006; 42: 331
(孙国元, 陈 光, 陈国良. 金属学报, 2006; 42: 331)
[14] Hofmann D C, Suh J Y, Wiest A, Duan G, Lind M L, Demetriou M D, Johnson W L. Nature, 2008; 451: 1085
[15] Fan C, Li C F, Inoue A. Phys Rev, 2000; 61B: R3761
[16] Lee M L, Li Y, Schuh C A. Acta Mater, 2004; 52: 4121
[17] Song S X, Bei H, Wadsworth J, Nieh T G. Intermetalics, 2008; 16: 813

[1] ZHENG Liang, ZHANG Qiang, LI Zhou, ZHANG Guoqing. Effects of Oxygen Increasing/Decreasing Processes on Surface Characteristics of Superalloy Powders and Properties of Their Bulk Alloy Counterparts: Powders Storage and Degassing[J]. 金属学报, 2023, 59(9): 1265-1278.
[2] ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[3] ZHANG Jian, WANG Li, XIE Guang, WANG Dong, SHEN Jian, LU Yuzhang, HUANG Yaqi, LI Yawei. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1109-1124.
[4] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[5] LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[6] CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[7] DING Hua, ZHANG Yu, CAI Minghui, TANG Zhengyou. Research Progress and Prospects of Austenite-Based Fe-Mn-Al-C Lightweight Steels[J]. 金属学报, 2023, 59(8): 1027-1041.
[8] YUAN Jianghuai, WANG Zhenyu, MA Guanshui, ZHOU Guangxue, CHENG Xiaoying, WANG Aiying. Effect of Phase-Structure Evolution on Mechanical Properties of Cr2AlC Coating[J]. 金属学报, 2023, 59(7): 961-968.
[9] WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[10] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[11] ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
[12] HOU Juan, DAI Binbin, MIN Shiling, LIU Hui, JIANG Menglei, YANG Fan. Influence of Size Design on Microstructure and Properties of 304L Stainless Steel by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 623-635.
[13] LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667.
[14] MA Zongyi, XIAO Bolv, ZHANG Junfan, ZHU Shize, WANG Dong. Overview of Research and Development for Aluminum Matrix Composites Driven by Aerospace Equipment Demand[J]. 金属学报, 2023, 59(4): 457-466.
[15] LI Shujun, HOU Wentao, HAO Yulin, YANG Rui. Research Progress on the Mechanical Properties of the Biomedical Titanium Alloy Porous Structures Fabricated by 3D Printing Technique[J]. 金属学报, 2023, 59(4): 478-488.
No Suggested Reading articles found!