Please wait a minute...
Acta Metall Sin  2009, Vol. 45 Issue (1): 1-5    DOI:
论文 Current Issue | Archive | Adv Search |
STRUCTURAL CERAMICS AND THEIR SUPERPLASTICITY  I. Introduction of Structural Ceramics
SONG Yuquan;JIA Hongjie; XU Jin; GUAN Xiaofang
Superplastic and Plastic Research Institute; Jilin University; Changchun 130025
Cite this article: 

SONG Yuquan JIA Hongjie XU Jin GUAN Xiaofang. STRUCTURAL CERAMICS AND THEIR SUPERPLASTICITY  I. Introduction of Structural Ceramics. Acta Metall Sin, 2009, 45(1): 1-5.

Download:  PDF(598KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

The structural ceramics can be classified as oxide ceramics, nitride ceramics and carbide ceramics, which all possess low density, high anti-wearability and strong ability of anti-high temperature erosion, so they are a kind of materials that can be used in severe environments. Their compositions, crystal structures and properties were simply introduced, and the present research progress as well as application was also reviewed.

Key words:  structural ceramics      microstructure      application     
Received:  09 October 2008     
ZTFLH: 

TQ174

 
Fund: 

Supported by National Natural Science Foundation of China (No.50375064) and “985 Project” of Jilin University

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2009/V45/I1/1

[1] Yin Y S, Zhang J D. Al2O3 Ceramic and Its Composites.Beijing: Chemical Industry Press, 2001: 1
(尹衍升, 张景德. 氧化铝陶瓷及其复合材料. 北京: 化学工业出版社, 2001: 1)
[2] Jiang D L. Fine Ceramic Materials. Beijing: China Logistics Publishing House, 2000: 48
(江东亮. 精细陶瓷材料. 北京: 中国物资出版社, 2000: 48)
[3] Wang L S. Special Ceramic. 2nd Ed., Changsha: Central South University of Technology Press, 2005: 146
(王零森. 特种陶瓷. 第2版, 长沙: 中南工业大学出版社, 2005: 146)
[4] Zhen W Y, Chen C D, Chen Z C. Inorg Chem Ind, 2000;32(1): 18
(郑文裕, 陈潮钿, 陈仲丛. 无机盐工业, 2000; 32(1): 18)
[5] Yin Y S, Li J. ZrO2 Ceramic and Its Composites. Beijing: Chemical Industry Press, 2004: 7
(尹衍升, 李嘉. 氧化锆陶瓷及其复合材料. 北京: 化学工业出版社, 2004: 7)
[6] Lange F F. J Mater Sci, 1982; 17: 240
[7] Rieth P H, Reed J S, Naumann AW. Am Ceram Soc Bull, 1976; 55: 717
[8] Chen D Q. China Ceram Ind, 1994; 1(2): 24
(陈达谦. 中国陶瓷工业, 1994; 1(2): 24)
[9] Zhang Y L, Ma J P. Handbook of Applied Ceramic Materials. Beijing: Chemical Industry Press, 2006: 319
(张玉龙, 马建平. 实用陶瓷材料手册. 北京: 化学工业出版社, 2006: 319)
[10] Wu M M, Xiao J J. Foshan Ceram, 2004; 14(5): 30
(吴明明, 肖俊建. 佛山陶瓷, 2004; 14(5): 30)
[11] Fan X M, Zhang C, Jiang D Y. Engineering Ceramic and Its Application. Beijing: China Machine Press, 2006: 56
(樊新民, 张骋, 蒋丹宇. 工程陶瓷及其应用. 北京: 机械工业出版社, 2006: 56)
[12] Du G C, Chen Y. Tool Eng, 2003; 37(9): 40
(杜国臣, 陈营. 工具技术, 2003; 37(9): 40)
[13] Yin S. Modern Ceramics and Its Application. Beijing: Beijing Science and Technology Press, 1990: 163
(殷声. 现代陶瓷及其应用. 北京: 北京科学技术出版社, 1990: 163)
[14] Oyama Y, Kamigaito O. Jpn J Appl Phys, 1971; 10: 1637
[15] Jack K H, Wilson W I. Nature Phys Sci, 1972; 238: 28
[16] Cai Y J, Liu J X, Shi F, Ma T C, Yang D Z. J Dalian Inst Light Ind, 1999; 18: 187
(蔡英骥, 刘敬肖, 史非, 马铁成, 杨大智. 大连轻工业学院学报, 1999; 18: 187)
[17] Du X H, Zhang G R, Sui Z T. China Ceram, 1997; 33(4): 39
(都兴红, 张广荣, 隋智通. 中国陶瓷, 1997; 33(4): 39)
[18] Xie P, Xue X X, Qu Y C, Wang Y J. Ceram Eng, 1998; 32(4): 38
(谢朋, 薛向欣, 瞿玉春, 王彦吉. 陶瓷工程, 1998; 32(4): 38)
[19] Jiang T, Xue X X, Yang J D. Refractories, 2001; 35(4): 45
(姜涛, 薛向欣, 杨建东. 耐火材料, 2001; 35(4): 45)
[20] She J H, Jiang D L. Ceram Eng, 1998; 32(3): 3
(佘继红, 江东亮. 陶瓷工程, 1998; 32(3): 3)

[1] ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[2] LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[3] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[4] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[5] LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[6] CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[7] LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[8] SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[9] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[10] WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[11] GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[12] FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti2AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[13] WANG Fa, JIANG He, DONG Jianxin. Evolution Behavior of Complex Precipitation Phases in Highly Alloyed GH4151 Superalloy[J]. 金属学报, 2023, 59(6): 787-796.
[14] ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
[15] LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667.
No Suggested Reading articles found!