Please wait a minute...
Acta Metall Sin  2012, Vol. 48 Issue (12): 1437-1445    DOI: 10.3724/SP.J.1037.2012.00239
Current Issue | Archive | Adv Search |
STUDY ON HEREDITARY OF PORES IN LASER REMELTING OF DIE CASTING AZ91D MAGNESIUM ALLOY
WANG Xiangjie 1, YOU Guoqiang 1,2, ZHANG Juncheng 1, LONG Siyuan 1,2
1. College of Materials Science and Engineering, Chongqing University, Chongqing 400044
2. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044
Cite this article: 

WANG Xiangjie YOU Guoqiang ZHANG Juncheng LONG Siyuan. STUDY ON HEREDITARY OF PORES IN LASER REMELTING OF DIE CASTING AZ91D MAGNESIUM ALLOY. Acta Metall Sin, 2012, 48(12): 1437-1445.

Download:  PDF(4570KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Porosity has been a main problem for die casting magnesium alloy welding and casting defect repair. In order to study the formation mechanism of pores in fusion welding of die casting magnesium alloy, in this research, experiment of die casting AZ91D magnesium alloy CO2 laser re–melting was carried out. OM and SEM were employed to observe the characteristics of pores existing at both the base metal and re–melted zone, and a software for particle size analysis called nano measure 1.2 was adopted to measure the pores’ size. During analysis, the work mainly focused on the relationship of pores in re–melted zone associated with that preexisting in the base metal. The results showed that: porosity in die cast magnesium alloy base metal showed apparently hereditary characteristic in the process of re–melting. Porosity preexisting in the die casting AZ91D magnesium alloy was mainly produced at the junction region of multi–grains, with high pressure of inner gas, small size and irregularity in shape. However, pores in the re–melting zone showed diversity. Specifically, the micro–pore was small in size, nearly round in cross section and smooth in the inner wall, which was induced by hydrogen stored in the base metal. The macro–pores were vermiculate, with gas channel and metal erosion traces at the inner wall. It’s considered that the micro–pore was mainly inherited from the atomic hydrogen solution in the base metal and molecular hydrogen stored in the die casting defects. In the re–melting process, gas bubble of hydrogen was formed through nucleation and development two steps, and there was no sufficient time to grow up. As a result, the hydrogen induced pore was great in number and small in size. While the macro–pores were inherited from porosity preexisting in the base metal, the corresponded gas bubble did not require nucleation, was directly formed from the involved gas in preexisting porosity during die–casting process. Development of gas bubble for macro–pore mainly was coalescence of small gas bubbles, which made the macro–pore show channel and crude in the inner wall. Furthermore, formation mechanism of the two types of pores were analyzed, and mathematical model on relationship of macro–pore in re–melted zone associated with that in the base metal was established.

Key words:  die casting magnesium alloy      laser re–melting      pore      inheritance mechanism     
Received:  28 April 2012     
ZTFLH:  TG 146.7  
Fund: 

Supported by National Natural Science Foundation of China (No.51105393), Fundamental Research Funds for the Central Universities (No.CDJXS11132226) and Chongqing University Open Fund of Large Equipment (No.2011121508)

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2012.00239     OR     https://www.ams.org.cn/EN/Y2012/V48/I12/1437

[1] Pan J L. Electr Weld Mach, 2005; 35(9): 1

(潘际銮. 电焊机, 2005; 35(9): 1)

[2] Shan J G, Zhang J, Zheng S Q, Chen W Z, Ren J L. Acta Metall Sin, 2009; 45: 1006

(单际国, 张靖, 郑世卿, 陈武柱, 任家烈. 金属学报, 2009; 45: 1006)

[3] Chen Z H, Yan H G, Chen J HMagnesium Alloys. Beijing: Chemical Industry Press, 2004: 38

(陈振华, 严红革, 陈吉华. 镁合金. 北京: 化学工业出版社, 2004: 38)

[4] Zhao H, Debroy T. Weld J, 2001; 80(8): 204

[5] Wahba M, Mizutani M, Kawahito Y, Katayama S. Mater Des, 2012; 33: 569

[6] Shan J G, Zhang J, Zheng S Q, Chen W Z, Ren J L. Rare Met Mater Eng, 2009; 38(S3): 234

(单际国, 张靖, 郑世卿, 陈武柱, 任家烈. 稀有金属材料与工程, 2009; 38(S3): 234)

[7] Zhang J, Shan J G, Wen P, Ren J L. Chin J Lasers, 2011; 38(6): 1

(张靖, 单际国, 温鹏, 任家烈. 中国激光, 2011; 38(6): 1)

[8] Zhang J, Shan J G, Wen P, Ren J L. Trans China Weld Inst, 2011; 32(5): 17

(张靖, 单际国, 温鹏, 任家烈. 焊接学报, 2011; 32(5): 17)

[9] You G Q, Zhu J H, Guo Q, Long S Y. Spec Cast Nonferrous Alloys, 2009; 29: 729

(游国强, 朱觉华, 郭 强, 龙思远. 特种铸造及有色合金, 2009; 29: 729)

[10] Wu J T, You G Q, Guo Q, Long S Y. Hot Work Technol, 2011; 40(1): 117

(武靖亭, 游国强, 郭强, 龙思远. 热加工工艺, 2011; 40(1): 117)

[11] Shen J, You G Q, Long S Y, Pan F S. Mater Charact, 2008; 59: 1059

[12] Min D, Shen J, Lai S Q, Chen J, Xu N, Liu H. Opt Laser Eng, 2011; 49(1): 89

[13] Liao H M. Master Dissertation, Chongqing University, 2006

(廖慧敏. 重庆大学硕士学位论文, 2006)

[14] Xu S X, Wu S S, Li Q. Light Met, 2008; (8): 43

(许四祥, 吴树森, 李庆. 轻金属, 2008; (8): 43)

[15] Xu S X, Wu S S, Mao Y W. Spec Cast Nonferrous Alloys, 2007; 27: 11

(许四祥, 吴树森, 毛有武. 特种铸造及有色合金, 2007; 27: 11)

[16] Cao X, Jahazi M, Immarigeon J P, Wallace W. J Mater Process Technol, 2006; 171: 188

[17] Yu K, Nakata K, Liao J. Sci Technol Weld Join, 2009; 14: 554

[18] Renzhi M, Yoshio B. Chem Phys Lett, 2003; 370: 770

[19] Tadao S, Hideo H, Tadashi E, Osamu F, Minoru L. J Mater Sci, 1981; 16: 1829

[20] Jia Z, Zhang Z Q, Yue Q C, Cui J Z. Foundry, 2011; 60: 635

(贾征, 张志强, 乐启炽, 崔建忠. 铸造, 2011; 60: 635)

[21] Zeng K, Klassen T, Oelerich W, Bormann R. Int J Hydrogen Energ, 1999; 24: 989

[22] Kimio K, Robert D, Pzhcke D. Metall Trans, 1985; 16B:359

[23] Poirrer D K, Yeum K, Maples A L. Metall Trans, 1987;18: 1979

[24] Wang X J, You G Q, Yang Z, Long S Y. Rare Met Mater Eng, 2012; 12 (accepted)

(王向杰, 游国强, 杨智, 龙思远. 稀有金属材料与工程, 2012; 12 (已接收))

[25] Chi C T, Chao C G, Liu T F, Wang C C. Sci Technol Weld Join, 2008; 13: 199

[26] German D, Dmitriy D. Surface Phenomena in Fusion Welding Processes. German: CRC Press Taylor&Francis Group, 2006: 262

[27] Triantafyllidis D, Li L, Stott F H. Appl Surf Sci, 2003; 208–209: 458

[1] HE Siliang, ZHAO Yunsong, LU Fan, ZHANG Jian, LI Longfei, FENG Qiang. Effects of Hot Isostatic Pressure on Microdefects and Stress Rupture Life of Second-Generation Nickel-Based Single Crystal Superalloy in As-Cast and As-Solid-Solution States[J]. 金属学报, 2020, 56(9): 1195-1205.
[2] CAO Fengting, WEI Jie, DONG Junhua, KE Wei, WANG Tiegang, FAN Qixiang. Corrosion Inhibition Behavior of 1-Hydroxyethylidene-1, 1-Diphosphonic Acid on 20SiMn Steel in Simulated Concrete Pore Solution Containing Cl-[J]. 金属学报, 2020, 56(6): 898-908.
[3] LI Yuancai, JIANG Wugui, ZHOU Yu. Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites[J]. 金属学报, 2020, 56(5): 776-784.
[4] SUN Zhengyang, WANG Yutian, LIU Wenbo. Phase-Field Simulation of the Interaction Between Pore and Grain Boundary[J]. 金属学报, 2020, 56(12): 1643-1653.
[5] Huadong YAN,Hui JIN. Three-Dimensional Characteristics and Morphological Evolution of Micro/Meso Pores inG20Mn5N Steel Castings[J]. 金属学报, 2019, 55(3): 341-348.
[6] ZHANG Guotao , YIN Yanguo , TONG Baohong , ZHANG Xingquan. Controllable Preparation and Self-Lubricating Mechanism Analysis of Bilayer Porous Iron-Based Powder Metallurgy Materials[J]. 金属学报, 2019, 55(11): 1448-1456.
[7] Jun LI,Wenpeng LIU,Yibin REN,Minggang SHEN,Ke YANG. Preparation of Micro Porous Stainless Steel by Physical Vacuum Dealloying[J]. 金属学报, 2017, 53(5): 524-530.
[8] YU Cheng, WU Shengchuan, HU Yanan, ZHANG Weihua, FU Yanan. THREE-DIMENSIONAL IMAGING OF GAS PORES IN FUSION WELDED Al ALLOYS BY SYNCHROTRON RADIATION X-RAY MICROTOMOGRAPHY[J]. 金属学报, 2015, 51(2): 159-168.
[9] ZHUO Weijia, LIU Yuan, LI Yanxiang. EFFECT OF WITHDRAWING RATE ON PORE MORPHOLOGY OF LOTUS-TYPE POROUS COPPER PRODUCED BY SINGLE-MOLD GASAR TECHNIQUE[J]. 金属学报, 2014, 50(8): 921-929.
[10] LI Zaijiu, JIN Qinglin, YANG Tianwu, ZHOU Rong, JIANG Yehua. A THERMODYNAMIC MODEL FOR DIRECTIONAL SOLIDIFICATION OF METAL-HYDROGEN EUTECTIC[J]. 金属学报, 2014, 50(4): 507-514.
[11] QI Hongfei, LIU Dabo, TENG Lejin, WANG Tianmin, LUO Fei, TIAN Ye. EFFECT OF PORE SIZES OF Au ANTIDOT ARRAYS ON PHOTOCATALYSIS PERFORMANCE OF Au/TiO2 COMPOSITE FILMS[J]. 金属学报, 2014, 50(10): 1163-1169.
[12] . FORMATION OF SOLIDIFICATION AND HOMOGENISATION MICROPORES IN TWO SINGLE CRYSTAL SUPERALLOYS PRODUCED BY HRS AND LMC PROCESSES[J]. 金属学报, 2012, 48(10): 1237-1247.
[13] CHEN Wen DU Ronggui HU Ronggang SHI Haiyan ZHU Yanfeng LIN Changjian. CORRELATION BETWEEN COMPOSITION OF REINFORCING STEEL SURFACE FILM AND STEEL CORROSION BEHAVIOR IN SIMULATED CONCRETE
PORE SOLUTIONS
[J]. 金属学报, 2011, 47(6): 735-742.
[14] SHI Jinjie SUN Wei GENG Guoqing. INFLUENCE OF CARBONATION ON THE CORROSION PERFORMANCE OF STEEL HRB335 IN SIMULATED CONCRETE PORE SOLUTION[J]. 金属学报, 2011, 47(1): 17-24.
[15] QIAO Bing DU Ronggui CHEN Wen ZHU Yanfeng LIN Changjian. EFFECT OF NO2AND Cl ON THE CORROSION BEHAVIOR OF REINFORCING STEEL IN SIMULATED CONCRETE PORE SOLUTIONS[J]. 金属学报, 2010, 46(2): 245-250.
No Suggested Reading articles found!