Please wait a minute...
金属学报  1992, Vol. 28 Issue (12): 1-8    
  论文 本期目录 | 过刊浏览 |
Si和Mn对钢中贝氏体形态和转变动力学的影响
刘世楷;杨柳;张筠;朱德贵
西南交通大学材料系;教授;成都市610031;西南交通大学;西南交通大学;西南交通大学
INFLUENCE OF Si AND Mn ON MORPHOLOGY OF BAINITIC FERRITE AND KINETICS OF BAINITE TRANSFORMATION IN Fe-C ALLOY
LIU Shikai; YANG Liu; ZHANG Jun; ZHU Degui (Southwest Jiaotong University; Chengdu)
引用本文:

刘世楷;杨柳;张筠;朱德贵. Si和Mn对钢中贝氏体形态和转变动力学的影响[J]. 金属学报, 1992, 28(12): 1-8.
, , , . INFLUENCE OF Si AND Mn ON MORPHOLOGY OF BAINITIC FERRITE AND KINETICS OF BAINITE TRANSFORMATION IN Fe-C ALLOY[J]. Acta Metall Sin, 1992, 28(12): 1-8.

全文: PDF(1638 KB)  
摘要: 分析了六种Fe-C-Si、Fe-C-Mn及Fe-C-Si-Mn合金的贝氏体(α_b)形态和微观亚结构,结果表明α_b的形态与Si,Mn类拖曳作用有密切关系,由计算得出的相变体积自由能差△G_v可粗略地估算出贝氏体相变的理论孕育时间τ,与TTT曲线上实测孕育时间比较,表明Fe-C-Mn及FE—C—Si—Mn的τ值基本上不取决于△G_v。的大小,用SIMS+EDS与二次离子谱仪(SIMS)测出F-C-Si-Mn中Mn在原奥氏体晶界上偏聚,从而抑制了β_b在该处形核,本文还讨论了Si,Mn共存时对相变动力学的复合作用。
关键词 贝氏体Fe—C—Si—Mn合金相变动力学    
Abstract:Morphologies and microsubstructures of bainitic ferrite, α_b, in 6 alloys of Fe-C-Si, Fe-C-Mn and Fe-C-Si-Mn systems have been examined using optical and transmission electron microscope. The difference of morphology between alloys was found to attribute to the solute drag-like effect. The relative incubation time, τ, of bainite transformation in different alloys was estimated by the calculated volume free energy change, △G_v. Comparing with the τ measured on the TTT-curves, it is found that the difference between the calculated and measured values are large enough in Fe-C-Mn and Fe-C-Si-Mn alloys. It means that the △G_v is not the main factor to determine the values of τ of these alloys. The segregation of Mn at prior austenite, γ, grain boundaries was detected by STEM+EDS and second ion mass spectroscopy (SIMS). Thus, nucleation of α_b at prior γ grain boundaries is therefore retarted and the fraction of intergranular ferrite increases with Mn content. The complex effect of Si and Mn is thought to be the effect of Si enhancing the segregation of Mn to γ grain boundaries.
Key wordsbainite    Fe-C-Si-Mn    phase transformation
    
基金资助:国家自然科学基金 5860248
1 Bhadeshia H K D H, Edmonds D V. Metall Trans, 1979; 10A:895
2 Liu S K, Reynolds W T Jr., Hu H, Shiflet G J, Aaronson H I. Metall Trans, 1985; 16A:457
3 Aaronson H h Liu S K, Reynolds W T Jr., Shiflet G I. J Mater Sci, 1985; 20:4232
4 Reynolds W T Jr., Liu S K, Li F Z, Hartfield S, Aaronson H I. Metall Trans, 1990; 21A:1479
5 Reynolds W T Jr., Li F Z, Shui C K, Aaronson H I. Metall Trans, 1990; 21A:1433
6 杨萍,杨柳,刘世楷.第2届全国贝氏体相变讨论会论文集,1990;10:26
7 Sharma R C, Purdy G R. Metall Trans, 1973; 14A:2303
8 Lee D Y,Marcus H L 见:中国金属学会编译组译,物理冶金进展评论,北京:冶金工业出版社, 1985;457
9 Balluffi R W. In: JohnSon W C, Blakely J M eds., Insterfacial Segregation. Metal Park, Ohio: ASM, 1979:193
10 Enomoto M, White C L, Aaronson H I. Metall Trans, 1988; 19A:1807
11 Guttmann M, McLean D. In: Johnson W C, Blakely J M eds., Interfacial Segregation. Metal Park, Ohio: ASM, 1979:261'
[1] 赵亚峰, 刘苏杰, 陈云, 马会, 马广财, 郭翼. 铁素体-贝氏体双相钢韧性断裂过程中的夹杂物临界尺寸及孔洞生长[J]. 金属学报, 2023, 59(5): 611-622.
[2] 李赛, 杨泽南, 张弛, 杨志刚. 珠光体-奥氏体相变中扩散通道的相场法研究[J]. 金属学报, 2023, 59(10): 1376-1388.
[3] 朱彬, 杨兰, 刘勇, 张宜生. 基于纳米压痕逆算法的热冲压马氏体/贝氏体双相组织的微观力学性能[J]. 金属学报, 2022, 58(2): 155-164.
[4] 朱东明, 何江里, 史根豪, 王青峰. 热输入对Q500qE钢模拟CGHAZ微观组织和冲击韧性的影响[J]. 金属学报, 2022, 58(12): 1581-1588.
[5] 蒋中华, 杜军毅, 王培, 郑建能, 李殿中, 李依依. M-A岛高温回火转变产物对核电SA508-3钢冲击韧性影响机制[J]. 金属学报, 2021, 57(7): 891-902.
[6] 刘曼, 胡海江, 田俊羽, 徐光. 变形对超高强贝氏体钢组织和力学性能的影响[J]. 金属学报, 2021, 57(6): 749-756.
[7] 彭云,宋亮,赵琳,马成勇,赵海燕,田志凌. 先进钢铁材料焊接性研究进展[J]. 金属学报, 2020, 56(4): 601-618.
[8] 王占花, 惠卫军, 谢志奇, 张永健, 赵晓丽. 回火对钒钛微合金化Mn-Cr系贝氏体型非调质钢组织和性能的影响[J]. 金属学报, 2020, 56(11): 1441-1451.
[9] 田亚强,田耕,郑小平,陈连生,徐勇,张士宏. 淬火配分贝氏体钢不同位置残余奥氏体C、Mn元素表征及其稳定性[J]. 金属学报, 2019, 55(3): 332-340.
[10] 万响亮, 胡锋, 成林, 黄刚, 张国宏, 吴开明. 两步贝氏体转变对中碳微纳结构钢韧性的影响[J]. 金属学报, 2019, 55(12): 1503-1511.
[11] 徐士新, 余伟, 李舒笳, 王坤, 孙齐松. 预变形温度对纳米贝氏体相变动力学及组织的影响[J]. 金属学报, 2018, 54(8): 1113-1121.
[12] 武慧东, 宫本吾郎, 杨志刚, 张弛, 陈浩, 古原忠. Fe-1.5(3.0)%Si-0.4%C合金贝氏体不完全转变现象及伴随的渗碳体析出[J]. 金属学报, 2018, 54(3): 367-376.
[13] 胡小锋, 姜海昌, 赵明久, 闫德胜, 陆善平, 戎利建. 一种Fe-Cr-Ni-Mo高强高韧合金钢焊接接头的组织和力学性能[J]. 金属学报, 2018, 54(1): 1-10.
[14] 陈连生, 李跃, 张明山, 田亚强, 郑小平, 徐勇, 张士宏. 两相区位错增殖对Mn元素配分及低碳钢贝氏体组织的影响[J]. 金属学报, 2017, 53(11): 1418-1426.
[15] 桂晓露,张宝祥,高古辉,赵平,白秉哲,翁宇庆. Q-P-T处理贝氏体/马氏体复相高强钢疲劳断裂特性研究*[J]. 金属学报, 2016, 52(9): 1036-1044.