Please wait a minute...
金属学报  2026, Vol. 62 Issue (5): 923-940    DOI: 10.11900/0412.1961.2025.00291
  综述 本期目录 | 过刊浏览 |
原位反应粉末冶金铝基复合材料界面研究进展
赵乃勤(), 王振博, 戎旭东, 赵冬冬, 何春年
天津大学 材料科学与工程学院 天津 300350
Advances in Interface of Powder Metallurgy Aluminum Matrix Composites Fabricated via In Situ Reaction: A Review
ZHAO Naiqin(), WANG Zhenbo, RONG Xudong, ZHAO Dongdong, HE Chunnian
School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
引用本文:

赵乃勤, 王振博, 戎旭东, 赵冬冬, 何春年. 原位反应粉末冶金铝基复合材料界面研究进展[J]. 金属学报, 2026, 62(5): 923-940.
Naiqin ZHAO, Zhenbo WANG, Xudong RONG, Dongdong ZHAO, Chunnian HE. Advances in Interface of Powder Metallurgy Aluminum Matrix Composites Fabricated via In Situ Reaction: A Review[J]. Acta Metall Sin, 2026, 62(5): 923-940.

全文: PDF(4963 KB)   HTML
摘要: 

铝基复合材料具有优异的比强度、比模量及良好的导热、导电性能,在航空航天、交通运输等领域展现出广阔的应用前景。原位反应技术能够在Al基体内部生成热力学稳定、界面洁净且结合良好的增强相,显著提升复合材料的综合性能,已成为制备高性能铝基复合材料的重要途径。为深入理解原位反应粉末冶金铝基复合材料的设计原理、界面优化及性能调控,从而促进新一代高性能铝基复合材料的开发,本文阐述了基于原位反应体系采用粉末冶金法制备铝基复合材料的反应机制、增强相的类型及其特性,揭示了原位增强相和Al基体的界面微观结构特征、界面取向关系对界面性能的影响,以及通过界面修饰策略优化界面结合状态的研究进展。同时,本文总结了原位反应复合材料中界面结构对力学行为的影响,并展望了该领域的未来发展方向。

关键词 : 铝基复合材料,  粉末冶金,  原位反应,  界面结构,  强韧化机制    
Abstract:

Aluminum matrix composites (AMCs) can be widely employed across fields such as aerospace and transportation owing to their high-specific strength and modulus as well as excellent thermal and electrical conductivity. In situ reaction technology enables the formation of thermodynamically stable reinforcements within the Al matrix, resulting in clean interfaces and strong interfacial bonding that considerably enhance the overall mechanical properties of AMCs. Consequently, this technology has emerged as a pivotal approach for fabricating high-performance AMCs. This review aims to comprehensively elucidate the design principles, interface optimization, and performance regulation of powder metallurgy AMCs fabricated via in situ reactions, thereby promoting the development of a new generation of high-performance AMCs. Specifically, the reaction mechanisms as well as reinforcement types and characteristics in various in situ reaction systems developed via powder metallurgy are systematically investigated. In addition, the interfacial microstructure characteristics between in situ reinforcements and the Al matrix are examined, with particular emphasis on the influence of crystallographic orientation relationships on interfacial properties. Moreover, research progress in optimizing interfacial bonding via modification strategies is discussed, and the influence of interfacial structure on the mechanical properties of AMCs is summarized along with an outlook on future development directions.

Key words: aluminum matrix composites    powder metallurgy    in situ reaction    interface structure    strengthening and toughening mechanism
收稿日期: 2025-09-28     
ZTFLH:  TG146.2  
基金资助:国家自然科学基金项目(U23A20546);国家自然科学基金项目(52025015);国家自然科学基金项目(52130105);国家自然科学基金项目(52422103);国家自然科学基金项目(52201162);天津市自然科学基金项目(22JCZDJC00020);天津市自然科学基金项目(24JCQNJC00150)
通讯作者: 赵乃勤,nqzhao@tju.edu.cn,主要从事金属基复合材料及纳米材料合成与复合研究
Corresponding author: ZHAO Naiqin, professor, Tel: (022)85356661, E-mail: nqzhao@tju.edu.cn
作者简介: 赵乃勤,女,1961年生,教授,博士
图1  基于界面原位反应的碳纳米管(CNT)/Al复合材料和还原氧化石墨烯(RGO)/Al复合材料的微观组织[34,35,37]
图2  通过化学气相沉积(CVD)技术原位合成CNT/Al复合材料和石墨烯纳米片(GNPs)/Al复合材料的制备过程示意图及微观组织[40,43]
图3  CuO/Al复合材料、B2O3/Al复合材料和TiO2/Al复合材料的微观组织[55~58]
图4  La2O3/Al复合材料、CeO2/Al复合材料、B4C/Al复合材料和(B4C + Al2O3)/Al复合材料的微观组织[59~62]
SystemPreparation methodAdvantageDisadvantageApplication field
Ex situ carbon materials/Al[34,35]Ball milling + sintering

Simple process

Difficulty in dispersion control, interface reactions not easily regulatedHigh-strength conductive components, electronic packaging, precision instruments
In situ synthesized carbon materials/Al[40,43]

In situ growth by CVD

Uniform reinforcement distribution, good interface bonding

Complex process, high cost, limited production

Oxide/Al[54,55]

Sintering reactionHigh reaction driving force, good thermal stability of reinforcementsDifficult to control precursor ratio and reaction kinetics

Lightweight structural components, wear-resistant parts, heat-resistant alloy substitutes

am-Al2O3/Al[59,60]

Ball milling pre-treatment + sintering reactionGood thermal stability and high-temperature performancePossible crystallization of amorphous phase at high temperatures
Al-Ti-X (X = C, B, Si)[64-66]Sintering reactionHigh hardness and good thermal stability of reinforcementsComplex reaction pathways in multi-component systems
表1  原位反应粉末冶金铝基复合材料中涉及的主要原位反应体系、制备方法、特点及其应用领域[34,35,40,43,54,55,59,60,64~66]
图5  基于固相扩散策略制备原位反应铝基复合材料界面的TEM像[54,77]
图6  基于界面修饰策略制备铝基复合材料的微观组织[90,91]
图7  CuO/Al复合材料和氮化硼纳米片(BNNS)/Al复合材料的裂纹扩展[54,74]
[1] Han T L, Liu E Z, Li J J, et al. A bottom-up strategy toward metal nano-particles modified graphene nanoplates for fabricating aluminum matrix composites and interface study [J]. J. Mater. Sci. Technol., 2020, 46: 21
doi: 10.1016/j.jmst.2019.09.045
[2] Gao Q, Wu S S, Lü S L, et al. Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process [J]. Mater. Des., 2016, 94: 79
doi: 10.1016/j.matdes.2016.01.023
[3] Bai X R, Xie H N, Zhang X, et al. Heat-resistant super-dispersed oxide strengthened aluminium alloys [J]. Nat. Mater., 2024, 23: 747
doi: 10.1038/s41563-024-01884-2
[4] Yang L Z, Han T L, Zhang X, et al. Cu atoms-assisted rapid fabrication of graphene/Al composites with tailored strain-delocalization effect by spark plasma sintering [J]. Mater. Res. Lett., 2022, 10: 567
doi: 10.1080/21663831.2022.2066484
[5] Yang L Z, Pu B W, Zhang X, et al. Manipulating mechanical properties of graphene/Al composites by an in-situ synthesized hybrid reinforcement strategy [J]. J. Mater. Sci. Technol., 2022, 123: 13
doi: 10.1016/j.jmst.2021.12.072
[6] He H Y, Fan G L, Saba F, et al. Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion [J]. Composites, 2023, 252B: 110514
[7] Chen J J, Han Y F, Li S P, et al. Evading the strength and ductility trade-off dilemma in titanium matrix composites through designing bimodal grains and micro-nano reinforcements [J]. Scr. Mater., 2023, 235: 115625
doi: 10.1016/j.scriptamat.2023.115625
[8] Yang S K, Zhang X, Zhao D D, et al. Progress on the creep resistance of aluminum matrix composites at high temperatures [J]. Foundry Technol., 2023, 44: 706
[8] 杨寿奎, 张 翔, 赵冬冬 等. 铝基复合材料的高温蠕变性能研究进展 [J]. 铸造技术, 2023, 44: 706
[9] Chen B, Shen J, Ye X, et al. Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites [J]. Acta Mater., 2017, 140: 317
doi: 10.1016/j.actamat.2017.08.048
[10] Chen X F, Rong X D, Zhao D D, et al. Regulating microstructure of Al matrix composites with nanocarbon architecture design towards prominent strength-ductility combination [J]. Scr. Mater., 2023, 222: 115037
doi: 10.1016/j.scriptamat.2022.115037
[11] Rong X D, Chen X F, Zhao D D, et al. Effect of aging treatment on microstructure and mechanical properties of Al matrix composite reinforced by in-situ intragranular Al2O3 [J]. Mater. Charact., 2023, 204: 113215
doi: 10.1016/j.matchar.2023.113215
[12] Zhao Y, Lin X B, Rong X D, et al. Macro- and meso-mechanic investigations on the mechanical properties of heterostructured Al matrix composites featuring intragranular reinforcement [J]. Mater. Res. Lett., 2024, 12: 408
doi: 10.1080/21663831.2024.2340635
[13] Li Y G, Geng J W, Wang Z P, et al. Influence of surface integrity on the fatigue performance of TiB2/Al composite treated by ultrasonic deep rolling: Experiments and simulations [J]. Composites, 2024, 271B: 111160
[14] Ren L, Gao T, Nie J F, et al. A novel core-shell TiC x particle by modifying TiC x with B element and the preparation of the (TiC x + AlN)/Al composite [J]. J. Alloys Compd., 2022, 894: 162448
doi: 10.1016/j.jallcom.2021.162448
[15] Yang H Y, Wang Z, Chen L Y, et al. Interface formation and bonding control in high-volume-fraction (TiC + TiB2)/Al composites and their roles in enhancing properties [J]. Composites, 2021, 209B: 108605
[16] Zhou Y, Yu Z Y, Zhao N Q, et al. Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites [J]. Mater. Des., 2013, 46: 724
doi: 10.1016/j.matdes.2012.11.022
[17] Li J, Wang F C, Shi C S, et al. High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis [J]. Mater. Sci. Eng., 2021, A799: 140127
[18] Zhang X, Li S F, Pan B, et al. A novel strengthening effect of in-situ nano Al2O3w on CNTs reinforced aluminum matrix nanocomposites and the matched strengthening mechanisms [J]. J. Alloys Compd., 2018, 764: 279
doi: 10.1016/j.jallcom.2018.06.006
[19] Shu R, Jiang X S, Li J R, et al. Microstructures and mechanical properties of Al-Si alloy nanocomposites hybrid reinforced with nano-carbon and in-situ Al2O3 [J]. J. Alloys Compd., 2019, 800: 150
doi: 10.1016/j.jallcom.2019.06.030
[20] Yang H R, Bai X R, Zhao D D, et al. Harnessing laser-induced in-situ nanowhiskers for high-strength aluminum alloys via additive manufacturing [J]. Acta Mater., 2026, 308: 121987
doi: 10.1016/j.actamat.2026.121987
[21] Ranjan S, Jha P K. Investigation on the thermodynamic stability of phases evolved in Al-based hybrid metal matrix composite fabricated using in-situ stir casting route [J]. J. Manuf. Process., 2023, 95: 14
doi: 10.1016/j.jmapro.2023.03.084
[22] Wang H, Zhang H M, Cui Z S, et al. Ductile fracture behavior of in situ TiB2 particle reinforced 7075 aluminum matrix composite in various stress states [J]. Trans. Nonferrous Met. Soc. China, 2023, 33: 2272
doi: 10.1016/S1003-6326(23)66258-2
[23] Wu Y S, Lin X B, Rong X D, et al. Towards understanding the microstructure-mechanical property correlations of multi-level heterogeneous-structured Al matrix composites [J]. J. Mater. Sci. Technol., 2025, 209: 117
doi: 10.1016/j.jmst.2024.05.012
[24] Rong X D, Li Y, Chen X F, et al. Plain interface strategy toward the high corrosion performance of Al matrix composites [J]. Sci. China Mater., 2023, 66: 4295
doi: 10.1007/s40843-023-2663-8
[25] Zhang X M, Hu T, Rufner J F, et al. Metal/ceramic interface structures and segregation behavior in aluminum-based composites [J]. Acta Mater., 2015, 95: 254
doi: 10.1016/j.actamat.2015.05.021
[26] Mao D X, Ma X T, Xie Y M, et al. In-situ solid-state deformation-driven rapid reaction towards higher strength-ductility Al-CuO composites [J]. Composites, 2024, 182A: 108174
[27] Yu W L, Sun T Y, Guo B S. Research progress on the interface regulation and properties of carbon nanotube reinforced Al matrix composites [J]. Foundry Technol., 2023, 44: 599
[27] 余炜琳, 孙天宇, 郭柏松. 碳纳米管增强Al基复合材料界面调控及性能研究进展 [J]. 铸造技术, 2023, 44: 599
[28] Duan S Y, Wu C L, Gao Z, et al. Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys [J]. Acta Mater., 2017, 129: 352
doi: 10.1016/j.actamat.2017.03.018
[29] Zhou W W, Yang P, Fan Y C, et al. Simultaneous enhancement of dispersion and interfacial adhesion in Al matrix composites reinforced with nanoceramic-decorated carbon nanotubes [J]. Mater. Sci. Eng., 2021, A804: 140784
[30] Zhang Z M, Fan G L, Tan Z Q, et al. Towards the strength-ductility synergy of Al2O3/Al composite through the design of roughened interface [J]. Composites, 2021, 224B: 109251
[31] Chen J F, Yan L X, Liang S Y, et al., Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs [J]. J. Alloys Compd., 2022, 901: 163404
doi: 10.1016/j.jallcom.2021.163404
[32] Guo B S, Chen Y Q, Wang Z W, et al. Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites [J]. Carbon, 2020, 159: 201
doi: 10.1016/j.carbon.2019.12.038
[33] Zhao N Q, Liu X H, Pu B W. Progress on multi-dimensional carbon nanomaterials reinforced aluminum matrix composites: A review [J]. Acta Metall. Sin., 2019, 55: 1
doi: 10.11900/0412.1961.2018.00456
[33] 赵乃勤, 刘兴海, 蒲博闻. 多维度碳纳米相增强铝基复合材料研究进展 [J]. 金属学报, 2019, 55: 1
doi: 10.11900/0412.1961.2018.00456
[34] Chen B, Shen J, Ye X, et al. Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites [J]. Carbon, 2017, 114: 198
doi: 10.1016/j.carbon.2016.12.013
[35] Zhou W W, Yamaguchi T, Kikuchi K, et al. Effectively enhanced load transfer by interfacial reactions in multi-walled carbon nanotube reinforced Al matrix composites [J]. Acta Mater., 2017, 125: 369
doi: 10.1016/j.actamat.2016.12.022
[36] Zhao N Q, Guo S Y, Zhang X, et al. Progress on graphene/copper composites focusing on reinforcement configuration design: A review [J]. Acta Metall. Sin., 2021, 57: 1087
doi: 10.11900/0412.1961.2021.00120
[36] 赵乃勤, 郭斯源, 张 翔 等. 基于增强相构型设计的石墨烯/Cu复合材料研究进展 [J]. 金属学报, 2021, 57: 1087
doi: 10.11900/0412.1961.2021.00120
[37] Li P B, Chen L Y, Cao B, et al. Hierarchical microstructure architecture: A roadmap towards strengthening and toughening reduced graphene oxide/2024Al matrix composites synthesized by flake powder thixoforming [J]. J. Alloys Compd., 2020, 823: 153815
doi: 10.1016/j.jallcom.2020.153815
[38] Han T L, Wang F C, Li J J, et al. Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates [J]. Composites, 2021, 212B: 108700
[39] Kwon H, Estili M, Takagi K, et al. Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites [J]. Carbon, 2009, 47: 570
doi: 10.1016/j.carbon.2008.10.041
[40] Yang X D, Liu E Z, Shi C S, et al. Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility [J]. J. Alloys Compd., 2013, 563: 216
doi: 10.1016/j.jallcom.2013.02.066
[41] Zhao N Q, Wang J, Shi C S, et al. Chemical vapor deposition synthesis of carbon nanospheres over Fe-based glassy alloy particles [J]. J. Alloys Compd., 2014, 617: 816
doi: 10.1016/j.jallcom.2014.08.072
[42] Sun F J, Shi C S, Rhee K Y, et al. In situ synthesis of CNTs in Mg powder at low temperature for fabricating reinforced Mg composites [J]. J. Alloys Compd., 2013, 551: 496
doi: 10.1016/j.jallcom.2012.11.053
[43] Liu X H, Li J J, Sha J W, et al. In-situ synthesis of graphene nanosheets coated copper for preparing reinforced aluminum matrix composites [J]. Mater. Sci. Eng., 2018, A709: 65
[44] Chen Y K, Zhang X, Liu E Z, et al. Fabrication of three-dimensional graphene/Cu composite by in-situ CVD and its strengthening mechanism [J]. J. Alloys Compd., 2016, 688: 69
[45] Lin X B, Rong X D, Pu B W, et al. Gaining strength-ductility combination in Al matrix composites with in-situ synthesized three-dimensional nanocarbon network [J]. J. Alloys Compd., 2024, 970: 172542
doi: 10.1016/j.jallcom.2023.172542
[46] Liu G, Zhao N Q, Shi C S, et al. In-situ synthesis of graphene decorated with nickel nanoparticles for fabricating reinforced 6061Al matrix composites [J]. Mater. Sci. Eng., 2017, A699: 185
[47] Hu J N, Zhang J, Luo G Q, et al. Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites [J]. Vacuum, 2021, 188: 110148
doi: 10.1016/j.vacuum.2021.110148
[48] He C N, Zhao N Q, Shi C S, et al. An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al-matrix composites [J]. Adv. Mater., 2007, 19: 1128
doi: 10.1002/adma.v19:8
[49] Huet B, Raskin J P. Role of Cu foil in-situ annealing in controlling the size and thickness of CVD graphene domains [J]. Carbon, 2018, 129: 270
doi: 10.1016/j.carbon.2017.12.043
[50] Li H P, Zhao N Q, Liu Y, et al. Fabrication and properties of carbon nanotubes reinforced Fe/hydroxyapatite composites by in situ chemical vapor deposition [J]. Composites, 2008, 39A: 1128
[51] Jia L J, Rong X D, Zhao D D, et al. Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system [J]. J. Alloys Compd., 2022, 891: 161991
doi: 10.1016/j.jallcom.2021.161991
[52] Wang S, Lin X B, Rong X D, et al. The role of Mg content in regulating microstructures and mechanical properties of Al-Mg-ZnO composites fabricated via in-situ reaction sintering [J]. Composites, 2024, 281B: 111565
[53] Rong X D, Zhao D D, He C N, et al. Review: Recent progress in aluminum matrix composites reinforced by in situ oxide ceramics [J]. J. Mater. Sci., 2024, 59: 9657
doi: 10.1007/s10853-023-09120-z
[54] Rong X D, Zhang X, Zhao D D, et al. In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering [J]. Scr. Mater., 2021, 198: 113825
doi: 10.1016/j.scriptamat.2021.113825
[55] Rong X D, Zhao D D, He C N, et al. Revealing the strengthening and toughening mechanisms of Al-CuO composite fabricated via in-situ solid-state reaction [J]. Acta Mater., 2021, 204: 116524
doi: 10.1016/j.actamat.2020.116524
[56] Rong X D, Zhao D D, Chen X F, et al. Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite [J]. Acta Mater., 2023, 256: 119110
doi: 10.1016/j.actamat.2023.119110
[57] Gao T, Liu L Y, Liu G L, et al. In-situ synthesis of an Al-based composite reinforced with nanometric γ-Al2O3 and submicron AlB2 particles [J]. J. Alloys Compd., 2022, 920: 165985
doi: 10.1016/j.jallcom.2022.165985
[58] Chao Z L, Zhang L C, Jiang L T, et al. Design, microstructure and high temperature properties of in-situ Al3Ti and nano-Al2O3 reinforced 2024Al matrix composites from Al-TiO2 system [J]. J. Alloys Compd., 2019, 775: 290
doi: 10.1016/j.jallcom.2018.09.376
[59] Zhou C, Lv M, Zan Y N, et al. Microstructure and mechanical properties of aluminum matrix composites produced by Al-La2O3 in-situ reaction [J]. Mater. Charact., 2022, 188: 111887
doi: 10.1016/j.matchar.2022.111887
[60] Liu Y, Hu H J, Shi Y H, et al. Microstructure and mechanical properties of Al matrix composites produced by Al-CeO2 in-situ reaction [J]. Mater. Charact., 2025, 228: 115373
doi: 10.1016/j.matchar.2025.115373
[61] Feng S Y, Li Q L, Liu W, et al. Microstructure and mechanical properties of Al-B4C composite at elevated temperature strengthened with in situ Al2O3 network [J]. Rare Met., 2020, 39: 671
doi: 10.1007/s12598-019-01279-2
[62] Zan Y N, Zhou Y T, Zhao H, et al. Enhancing high-temperature strength of (B4C + Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure [J]. Composites, 2020, 183B: 107674
[63] Zhu H G, Guo G H, Cui T, et al. Influences of carbon additions on reaction mechanisms and tensile properties of Al-based composites synthesized in-situ by Al-SiO2 powder system [J]. Mater. Sci. Eng., 2015, A623: 78
[64] Gao Y Y, Qiu F, Liu T S, et al. Effects of carbon source on TiC particles' distribution, tensile, and abrasive wear properties of in situ TiC/Al-Cu nanocomposites prepared in the Al-Ti-C system [J]. Nanomaterials, 2018, 8: 610
doi: 10.3390/nano8080610
[65] Zhang X, Hu J Y, Dong B X, et al. Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites [J]. Ceram. Int., 2022, 48: 25894
doi: 10.1016/j.ceramint.2022.05.266
[66] Zhang X, Li X, Wang J, et al. Synthesis mechanism and interface contribution towards the strengthening effect of in-situ Ti5Si3 reinforced Al matrix composites [J]. Mater. Sci. Eng., 2024, A918: 147427
[67] Ma L S, Zhang X, Duan Y H, et al. Achieving exceptional high-temperature resistant Al matrix composites via two-dimensional BN pinning grain rotation [J]. Composites, 2023, 253B: 110570
[68] Li M Q, Wang S K, Wang Q H, et al. Microstructure and mechanical properties of MoAlB particles reinforced Al matrix composites by interface modification with in situ formed Al12Mo [J]. J. Alloys Compd., 2020, 823: 153813
doi: 10.1016/j.jallcom.2020.153813
[69] Wang F C, Li J J, Shi C S, et al. In-situ synthesis of MgAlB4 whiskers as a promising reinforcement for aluminum matrix composites [J]. Mater. Sci. Eng., 2019, A764: 138229
[70] Ding Y P, Wang H T, Mao D X, et al. Enhanced strength and toughness of CNTs/Al composites via in-situ interface engineering with nanoscale tungsten [J]. Mater. Sci. Eng., 2025, A945: 149062
[71] Zhou W W, Zhou Z X, Dong M Q, et al. Enhanced interfacial strength in carbon-nanotubes-reinforced Al matrix composites via an interface substitution strategy [J]. Composites, 2025, 195A: 108955
[72] Zhang Z, Zhang C S, Chen L, et al. Regulating interface structure and shear performance of extruded NiTi fiber reinforced Al-based composites via heat treatments [J]. Composites, 2025, 305B: 112741
[73] Chen X F, Qian F, Bai X R, et al. Formation of the orientation relationship-dependent interfacial carbide in Al matrix composite affected by architectured carbon nanotube [J]. Acta Mater., 2022, 228: 117758
doi: 10.1016/j.actamat.2022.117758
[74] Ma L S, Zhang X, Duan Y H, et al. Constructing the coherent transition interface structure for enhancing strength and ductility of hexagonal boron nitride nanosheets/Al composites [J]. J. Mater. Sci. Technol., 2023, 145: 235
doi: 10.1016/j.jmst.2022.10.058
[75] Sun J P, Xiu Z Y, Meng Y X, et al. Microstructure and mech-anical properties of graphene nanoplatelets/Al composites with polysilazane-modulated interlocked interface [J]. Carbon, 2025, 243: 120586
doi: 10.1016/j.carbon.2025.120586
[76] Yang X, Yang D, Huang H, et al. Root inspired in situ interlocked interface for strength and ductility combination of refractory high-entropy alloys/Ni composites by activated sintering [J]. Mater. Sci. Eng., 2025, A939: 148500
[77] Wang F C, Li J J, Shi C S, et al. Orientation relationships and interface structure in MgAl2O4 and MgAlB4 co-reinforced Al matrix composites [J]. ACS Appl. Mater. Interfaces, 2019, 11: 42790
doi: 10.1021/acsami.9b14923
[78] Zhang T Y, Wu Y W, Ju S H. Improving thermal expansion coefficients and mechanical properties of interconnect copper by doping Al2O3 nanoparticles: Insights from atomistic simulations [J]. Phys. Chem. Chem. Phys., 2025, 27: 5604
doi: 10.1039/D4CP03224A
[79] Luo W, Xue T, Zuo D, et al. Formation and strengthening mechanism of kink bands in an ultra-coarse-grained Fe-Cr-Al alloy [J]. J. Mater. Sci. Technol., 2024, 186: 1
doi: 10.1016/j.jmst.2023.11.017
[80] Zhang X, Shi C S, Liu E Z, et al. Effect of interface structure on the mechanical properties of graphene nanosheets reinforced copper matrix composites [J]. ACS Appl. Mater. Interfaces, 2018, 10: 37586
doi: 10.1021/acsami.8b09799
[81] Zhou G W. TEM investigation of interfaces during cuprous island growth [J]. Acta Mater., 2009, 57: 4432
doi: 10.1016/j.actamat.2009.06.005
[82] Yang A C, Ma L S, Duan Y H, et al. Interfacial modification enhancing corrosion resistance of boron nitride nanosheets/Al matrix composites [J]. J. Mater. Sci. Technol., 2026, 240: 98
doi: 10.1016/j.jmst.2025.02.090
[83] Rong X D, Li Y, Chen X F, et al. Achieving high mechanical properties and corrosion resistance of Al-Zn-Mg matrix composites via regulating intragranular reinforcements [J]. J. Mater. Sci. Technol., 2023, 153: 1
doi: 10.1016/j.jmst.2022.12.066
[84] Pu B W, Rong X D, Ma L S, et al. Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites [J]. J. Alloys Compd., 2023, 968: 172022
doi: 10.1016/j.jallcom.2023.172022
[85] Wu C D, Zhang J, Luo G Q, et al. Interfacial segregation and precipitates behavior in the ultrafine grained Al-based metal matrix composites [J]. J. Alloys Compd., 2019, 770: 625
doi: 10.1016/j.jallcom.2018.08.183
[86] Chen L W, Zhao Y H, Jing J H, et al. Microstructural evolution in graphene nanoplatelets reinforced magnesium matrix composites fabricated through thixomolding process [J]. J. Alloys Compd., 2023, 940: 168824
doi: 10.1016/j.jallcom.2023.168824
[87] Shin S E, Ko Y J, Bae D H. Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures [J]. Composites, 2016, 106B: 66
[88] Chandran P, Sirimuvva T, Nayan N, et al. Effect of carbon nanotube dispersion on mechanical properties of aluminum-silicon alloy matrix composites [J]. J. Mater. Eng. Perform., 2014, 23: 1028
doi: 10.1007/s11665-013-0835-1
[89] Zhu L, Ma L S, Zhao D D, et al. Contribution of robust transitional interface featuring Mg segregation to the strength-ductility synergy of boron nitride nanosheets/Al composite [J]. Compos. Commun., 2024, 48: 101908
doi: 10.1016/j.coco.2024.101908
[90] Pu B W, Zhang X, Chen X F, et al. Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids [J]. Composites, 2022, 234B: 109731
[91] Rong X D, Chen X F, Zhao D D, et al. High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction [J]. Composites, 2023, 173A: 107630
[92] Ju B Y, Yang W S, Wu G H. Research process on interface modification and strengthening mechanism of nanocomposites [J]. Mater. China, 2020, 39: 642
[92] 鞠渤宇, 杨文澍, 武高辉. 纳米复合材料界面调控与强化机制研究进展 [J]. 中国材料进展, 2020, 39: 642
[93] Liu P, Hou B, Wang A Q, et al. Superior strength-plasticity synergy in a heterogeneous lamellar Ti2AlC/TiAl composite with unique interfacial microstructure [J]. J. Mater. Sci. Technol., 2023, 159: 21
doi: 10.1016/j.jmst.2023.03.011
[94] Chen X, Liu K F, Peng S W, et al. Enhanced mechanical properties of the surface-modified CNTs reinforced 2195 aluminum-based composite [J]. Mater. Sci. Eng., 2025, A922: 147623
[95] Bagchi S, Ke C H, Chew H B. Oxidation effect on the shear strength of graphene on aluminum and titanium surfaces [J]. Phys. Rev., 2018, 98B: 174106
[96] Zhou W W, Mikulova P, Fan Y C, et al. Interfacial reaction induced efficient load transfer in few-layer graphene reinforced Al matrix composites for high-performance conductor [J]. Composites, 2019, 167B: 93
[97] Li A B, Wang G S, Zhang X X, et al. Enhanced combination of strength and ductility in ultrafine-grained aluminum composites reinforced with high content intragranular nanoparticles [J]. Mater. Sci. Eng., 2019, A745: 10
[98] Li Q, Qiu F, Dong B X, et al. Fabrication, microstructure refinement and strengthening mechanisms of nanosized SiCP/Al composites assisted ultrasonic vibration [J]. Mater. Sci. Eng., 2018, A735: 310
[99] Yang L Z, Zhou B Z, Ma L S, et al. Architectured interfacial interlocking structure for enhancing mechanical properties of Al matrix composites reinforced with graphene nanosheets [J]. Carbon, 2021, 183: 685
doi: 10.1016/j.carbon.2021.07.034
[100] Pan A Q, Wang W Y, Xie J P, et al. Molecular dynamics simulations of interface structure and deformation mechanisms in metal/ceramic composites under tension [J]. Mech. Mater., 2023, 184: 104688
doi: 10.1016/j.mechmat.2023.104688
[1] 欧阳求保, 苏楠, 王瑞安, 刘侃, 张荻. 跨尺度协同增强铝基复合材料研究进展[J]. 金属学报, 2026, 62(5): 733-742.
[2] 吴志勇, 邵徽凡, 蔡长春, 曾敏, 王振军, 王艳丽, 陈雷, 熊博文. 斜纹碳布缝合织物结构增强铝基复合材料的高温拉伸及断裂行为[J]. 金属学报, 2025, 61(9): 1387-1402.
[3] 赵今涛, 孙利芳, 何竹风, 刘玉杰, 马小柏, 申勇峰, 贾楠. 基于深冷轧制备的高强韧高氮奥氏体不锈钢的力学行为[J]. 金属学报, 2025, 61(12): 1884-1894.
[4] 徐一斐, 张楠, 许培鑫, 杜博睿, 史华, 王淼辉. 超高速激光原位熔覆Ti(C, B)/Ni60A复合涂层的界面特征与表面磨损机理[J]. 金属学报, 2024, 60(12): 1721-1730.
[5] 陈占兴, 王玉鹏, 荣光飞, 张新房, 马腾飞, 王晓红, 邢秋玮, 朱冬冬. 微纳米Ti2AlC增强TiAl复合材料高温强韧化机制[J]. 金属学报, 2024, 60(12): 1746-1754.
[6] 徐磊, 田晓生, 吴杰, 卢正冠, 杨锐. 热等静压成形Inconel 718粉末合金的显微组织和力学性能[J]. 金属学报, 2023, 59(5): 693-702.
[7] 马宗义, 肖伯律, 张峻凡, 朱士泽, 王东. 航天装备牵引下的铝基复合材料研究进展与展望[J]. 金属学报, 2023, 59(4): 457-466.
[8] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[9] 朱云鹏, 覃嘉宇, 王金辉, 马鸿斌, 金培鹏, 李培杰. 机械球磨结合粉末冶金制备AZ61超细晶镁合金的组织与性能[J]. 金属学报, 2023, 59(2): 257-266.
[10] 马国楠, 朱士泽, 王东, 肖伯律, 马宗义. SiC颗粒增强Al-Zn-Mg-Cu复合材料的时效行为和力学性能[J]. 金属学报, 2023, 59(12): 1655-1664.
[11] 聂金凤, 伍玉立, 谢可伟, 刘相法. Al-AlN异构纳米复合材料的组织构型与热稳定性[J]. 金属学报, 2022, 58(11): 1497-1508.
[12] 刘悦, 汤鹏正, 杨昆明, 沈一鸣, 吴中光, 范同祥. 抗辐照损伤金属基纳米结构材料界面设计及其响应行为的研究进展[J]. 金属学报, 2021, 57(2): 150-170.
[13] 毕胜, 李泽琛, 孙海霞, 宋保永, 刘振宇, 肖伯律, 马宗义. 高能球磨结合粉末冶金法制备碳纳米管增强7055Al复合材料的微观组织和力学性能[J]. 金属学报, 2021, 57(1): 71-81.
[14] 董虎林,包海萍,彭建洪. TiC含量对铁基复合材料力学性能及耐磨性能的影响[J]. 金属学报, 2019, 55(8): 1049-1057.
[15] 卢正冠,吴杰,徐磊,崔潇潇,杨锐. Ti2AlNb异形粉末环件的轧制成形与性能研究[J]. 金属学报, 2019, 55(6): 729-740.