Please wait a minute...
金属学报  2007, Vol. 43 Issue (12): 1239-1244     
  论文 本期目录 | 过刊浏览 |
304不锈钢冷轧退火∑3n特殊晶界分布研究
方晓英;王卫国;郭 红;张 欣;周邦新
上海大学材料科学与工程学院材料研究所; 山东理工大学机械工程学院
3n special boundary distributions of the cold-rolled and annealed 304 stainless steel
FANG Xiao-Ying
山东理工大学机械工程学院
引用本文:

方晓英; 王卫国; 郭红; 张欣; 周邦新 . 304不锈钢冷轧退火∑3n特殊晶界分布研究[J]. 金属学报, 2007, 43(12): 1239-1244 .
, , , , . 3n special boundary distributions of the cold-rolled and annealed 304 stainless steel[J]. Acta Metall Sin, 2007, 43(12): 1239-1244 .

全文: PDF(1123 KB)  
摘要: 采用电子背散射衍射(EBSD)技术研究了固溶处理的304不锈钢经6%-50%冷轧变形后在1173 K下进行长时间(24-96 h)退火后的晶界特征分布(GBCD). 结果表明, 经小变形(约6%)冷轧退火后的样品出现了较多的∑3n (n=1, 2, 3)特殊晶界, 较好地隔断了一般大角度晶界网络的连通性. 通过基于EBSD的单一截面迹线法对共格和非共格3晶界进行了区分测定, 显示被优化的晶界特征分布中, 非共格∑3孪晶界是其主要部分. 进一步分析指出, 非共格∑3晶界的迁移和反应与基于退火孪晶的中低层错能金属材料GBCD优化密切相关.
关键词 ∑3n晶界单一截面迹线法非共格∑3晶界    
Abstract:Grain boundary character distributions (GBCD) of type 304 stainless steel, which was strained by cold rolling and then annealed at 1173K, were analyzed by electron back scatter diffraction (EBSD). The results showed that low strain (~6%) followed by long-time annealing (24h~96h) resulted in a GBCD containing a higher fraction of ∑3n (n=1,2,3) boundaries (special boundaries), in which the connectivity of general high angle grain boundary (HAB) network was interrupted significantly by ∑9 and ∑27 segments. Incoherent and coherent 3 boundaries were identified by single-section trace analysis method, which showed that the major part of 3 boundaries were incoherent ones in the optimized GBCD. Further discussion pointed out that the migration and interaction of incoherent ∑3 boundaries might be the mechanism of twin-induced GBCD optimization.
Key words∑3n boundaries    single-section trace analysis    incoherent ∑3 boundaries    304 stainless steel
收稿日期: 2007-04-06     
ZTFLH:  TG111  
[1]Froment M.J Phys,1975;36:371.
[2]Xian X R,Chou Y T.Philos Mag,1982;45A:1075
[3]Pumphrey P H.In:Chadwick G A,Smith D A eds.,Spe- cial High Angle Boundaries,Grain Boundary Structure and Properties.London:Academic Press,1976:13
[4]Watanabe T.Res Mech,1984:11:47
[5]Lin P,Palumbo G,Erb U,Aust K T.Scr Metall Mater, 1995;33:1387
[6]Pan Y,Adams B L,Olson T.Acta Mater,1996;44:4685
[7]Xia S,Zhou B X,Chen W J.Scr Mater,2006;54:2019
[8]Kumar M,Schwartz A J,King W E.Acta Mater,2002; 50:2599
[9]Xia S,Zhou B X,Chen W J.Acta Metall Sin,2006;42: 129 (夏爽,周邦新,陈文觉.金属学报,2006;42:129)
[10]Wang W G,Zhou B X,Feng L.Acta Metall Sin,2006;42: 715 (王卫国,周邦新,冯柳.金属学报,2006;42:715)
[11]Lee D S,Ryoo H S,Hwang S K.Mater Sci Eng,2003; A354:106
[12]Shimada M,Kokawa H,Wang Z J,Sato Y S,Karibe I. Acta Mater,2002;50:2331
[13]Bi H Y,Kokawa H Z,Wang J,Shimada M,Sato Y S.Scr Mater,2003;49:219
[14]Michiuchi M,Kokawa H,Wang Z J,Sato Y S,Sakai K. Acta Mater,2006;54:5179
[15]Thaveeprungsriporn V,Sinsrok P,Thong-Aram D.Scr Mater,2001;44:67
[16]King W E,Schwartz A J.Scr Mater,1998;38:440
[17]Lee S Y,Chun Y B,Han J W.Mater Sci Eng,2003;A363: 307.
[18]Lehockey E M,Limoges D,Palumbo G.J Power Sources, 1999;78:79
[19]Palumbo G,Erb U.MRS Bull,1999;11:27
[20]Brandon D G.Acta Metall,1966;14:1479
[21]Randle V.Scr Mater,2001;44:2789
[22]Wright S I,Larsen R J.JOM,2002;205:245
[23]Mahajan S,Pande C S,Imam M A,Rath B B.Acta Mater, 1997;45:2633
[24]Randle V.Acta Mater,2004;52:4067
[25]Wang W G,Guo H.Mater Sci Eng,2007;A445:155
[26]Wang W G.Mater Sci Forum,2007;539:3389
[27]Randle V,Davies P,Hulm B.Philos Mag,1999;79A:305
[28]Schuh C A,Kumar M,King W E.J Mater Sci,2005;40: 847
[29]Song K H,Chun Y B,Hwang S K.Mater Sci Eng,2007; A454:629F
[1] 张海峰, 闫海乐, 方烽, 贾楠. FeMnCoCrNi高熵合金双晶微柱变形机制的分子动力学模拟[J]. 金属学报, 2023, 59(8): 1051-1064.
[2] 徐永生, 张卫刚, 徐凌超, 但文蛟. 铁素体晶间变形协调与硬化行为模拟研究[J]. 金属学报, 2023, 59(8): 1042-1050.
[3] 常松涛, 张芳, 沙玉辉, 左良. 偏析干预下体心立方金属再结晶织构竞争[J]. 金属学报, 2023, 59(8): 1065-1074.
[4] 王宗谱, 王卫国, Rohrer Gregory S, 陈松, 洪丽华, 林燕, 冯小铮, 任帅, 周邦新. 不同温度轧制Al-Zn-Mg-Cu合金再结晶后的{111}/{111}近奇异晶界[J]. 金属学报, 2023, 59(7): 947-960.
[5] 李福林, 付锐, 白云瑞, 孟令超, 谭海兵, 钟燕, 田伟, 杜金辉, 田志凌. 初始晶粒尺寸和强化相对GH4096高温合金热变形行为和再结晶的影响[J]. 金属学报, 2023, 59(7): 855-870.
[6] 杨杜, 白琴, 胡悦, 张勇, 李志军, 蒋力, 夏爽, 周邦新. GH3535合金中晶界特征对碲致脆性开裂影响的分形分析[J]. 金属学报, 2023, 59(2): 248-256.
[7] 李昕, 江河, 姚志浩, 董建新. O原子对高温合金基体NiCoNiCr晶界作用的理论计算分析[J]. 金属学报, 2023, 59(2): 309-318.
[8] 刘路军, 刘政, 刘仁辉, 刘永. Nd90Al10 晶界调控对晶界扩散磁体磁性能和微观结构的影响[J]. 金属学报, 2023, 59(11): 1457-1465.
[9] 王江伟, 陈映彬, 祝祺, 洪哲, 张泽. 金属材料的晶界塑性变形机制[J]. 金属学报, 2022, 58(6): 726-745.
[10] 李海勇, 李赛毅. Al <111>对称倾斜晶界迁移行为温度相关性的分子动力学研究[J]. 金属学报, 2022, 58(2): 250-256.
[11] 刘仲武, 何家毅. 钕铁硼永磁晶界扩散技术和理论发展的几个问题[J]. 金属学报, 2021, 57(9): 1155-1170.
[12] 胡标, 张华清, 张金, 杨明军, 杜勇, 赵冬冬. 界面热力学与晶界相图的研究进展[J]. 金属学报, 2021, 57(9): 1199-1214.
[13] 倪珂, 杨银辉, 曹建春, 王刘行, 刘泽辉, 钱昊. 18.7Cr-1.0Ni-5.8Mn-0.2NNi型双相不锈钢的大变形热压缩软化行为[J]. 金属学报, 2021, 57(2): 224-236.
[14] 孙佳, 李学雄, 张金虎, 王刚, 杨梅, 王皞, 徐东生. Ti-6Al-4V合金βα相变中晶界α相形成机制的相场模拟[J]. 金属学报, 2020, 56(8): 1113-1122.
[15] 李秀程,孙明煜,赵靖霄,王学林,尚成嘉. 铁素体-贝氏体/马氏体双相钢中界面的定量化晶体学表征[J]. 金属学报, 2020, 56(4): 653-660.