Please wait a minute...
金属学报  1995, Vol. 31 Issue (2): 64-68    
  论文 本期目录 | 过刊浏览 |
两种含硼Ni_3Al合金的微观组织与力学性能
李钢;王中光;郭建亭;谭明晖;师昌绪
中国科学院金属研究所;材料疲劳与断裂国家重点实验室;中国科学院金属研究所
^MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TWO Ni_3Al ALLOYS
LI Gang;WANG Zhongguang(State Key Laboratory of Fatigue and Fracture for Materials;Institute of Metal Research; Chinese Academy of Sciences; Shenyang; 110015).GUO Jianting; TAN Minghui;SHI Changxu(Institute of Metal Research; Chinese Academy of Sciences;Shenyang; 110015)(Manuscript received 94-05 -03)
引用本文:

李钢;王中光;郭建亭;谭明晖;师昌绪. 两种含硼Ni_3Al合金的微观组织与力学性能[J]. 金属学报, 1995, 31(2): 64-68.
, , , , . ^MECHANICAL PROPERTIES AND MICROSTRUCTURES OF TWO Ni_3Al ALLOYS[J]. Acta Metall Sin, 1995, 31(2): 64-68.

全文: PDF(396 KB)  
摘要: 本文研究了两种不同硼含量Ni_3Al合金的微观组织、室温拉伸及高周疲劳性能.Ni_3Al(0.6at.-%B)合金为单相组织,Ni_3Al(1.0at.-%B)合金中除γ′相外,还有微量(γ′+硼化物)共晶体.虽然Ni_3Al(1.0B)的拉伸强度较Ni_3Al(0.6B)的高,但在相同的循环应力水平下,后者的疲劳寿命显著高于前者的.疲劳断口观察表明两种合金的疲劳裂纹萌生和扩展行为各不相同.
关键词 Ni_3Al微观组织力学性能    
Abstract:The microstructures and mechanical properties of two polycrystalline alloys, a Ni_3Al(0.6 at- %B) alloy and a Ni_3Al(1 .0 at-%B) alloy. are studied. The Ni_3Al(0.6 B)is a single phase alloy whereas the Ni_3Al(1.0 B) consists of few boride eutectic at the grain boundaries. Tensile tests and high cycle fatigue tests at room temperature are carried out in air.The results indicate that the fatigue resistance of the Ni_3Al(0.6B) alloy is higher than that of the Ni_3Al(1.0B) alloy. although, the latter is much higher than the former in tensile strength. The characteristics of fatigue crack initiation and propagation in the two Ni_3Al(B) alloys are different.Correspondent:LI Gang,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110015
Key words Ni_3Al    mechanical properties    microstructures
收稿日期: 1995-02-18     
基金资助:国家自然科学基金
1青木清,和泉修.日本金属学会志,1979;43:11902MasahashiN,TakasugiT,IzumiO.ActaMetall,1988;39:18233LiuCT.WhiteCL.Horton A.ActaMetall,1985:33:2134GuoJianting,LiHui.SunChao,WangShuhe.RenDagang,XiongLiangyu,JiangJian.MaterSciEng,1992;A152:1205HerediaFE,PopeDP.ActaMetall,1991;39:20176StoloffNS,FuchsGE,KuruvillaA,ChoeSJ.In:StoloffNSetaled.,MaterResSocSympProc,1987:81:2477SureshS.FatigueofMaterials.CambridgeUniversityPress,1991
[1] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[2] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124.
[3] 张雷雷, 陈晶阳, 汤鑫, 肖程波, 张明军, 杨卿. K439B铸造高温合金800℃长期时效组织与性能演变[J]. 金属学报, 2023, 59(9): 1253-1264.
[4] 郑亮, 张强, 李周, 张国庆. /降氧过程对高温合金粉末表面特性和合金性能的影响:粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278.
[5] 陈礼清, 李兴, 赵阳, 王帅, 冯阳. 结构功能一体化高锰减振钢研究发展概况[J]. 金属学报, 2023, 59(8): 1015-1026.
[6] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096.
[7] 丁桦, 张宇, 蔡明晖, 唐正友. 奥氏体基Fe-Mn-Al-C轻质钢的研究进展[J]. 金属学报, 2023, 59(8): 1027-1041.
[8] 刘兴军, 魏振帮, 卢勇, 韩佳甲, 施荣沛, 王翠萍. 新型钴基与Nb-Si基高温合金扩散动力学研究进展[J]. 金属学报, 2023, 59(8): 969-985.
[9] 袁江淮, 王振玉, 马冠水, 周广学, 程晓英, 汪爱英. Cr2AlC涂层相结构演变对力学性能的影响[J]. 金属学报, 2023, 59(7): 961-968.
[10] 冯艾寒, 陈强, 王剑, 王皞, 曲寿江, 陈道伦. 低密度Ti2AlNb基合金热轧板微观组织的热稳定性[J]. 金属学报, 2023, 59(6): 777-786.
[11] 吴东江, 刘德华, 张子傲, 张逸伦, 牛方勇, 马广义. 电弧增材制造2024铝合金的微观组织与力学性能[J]. 金属学报, 2023, 59(6): 767-776.
[12] 侯娟, 代斌斌, 闵师领, 刘慧, 蒋梦蕾, 杨帆. 尺寸设计对选区激光熔化304L不锈钢显微组织与性能的影响[J]. 金属学报, 2023, 59(5): 623-635.
[13] 王长胜, 付华栋, 张洪涛, 谢建新. 冷轧变形对高性能Cu-Ni-Si合金组织性能与析出行为的影响[J]. 金属学报, 2023, 59(5): 585-598.
[14] 刘满平, 薛周磊, 彭振, 陈昱林, 丁立鹏, 贾志宏. 后时效对超细晶6061铝合金微观结构与力学性能的影响[J]. 金属学报, 2023, 59(5): 657-667.
[15] 张东阳, 张钧, 李述军, 任德春, 马英杰, 杨锐. 热处理对选区激光熔化Ti55531合金多孔材料力学性能的影响[J]. 金属学报, 2023, 59(5): 647-656.