Please wait a minute...
金属学报  1990, Vol. 26 Issue (2): 110-115    
  论文 本期目录 | 过刊浏览 |
交变载荷下点蚀坑的统计分布及演化
周向阳;柯伟;臧启山
中国科学院金属腐蚀与防护研究所;助理研究员;沈阳(110015);中国科学院金属腐蚀与防护研究所;中国科学院金属研究所
EVOLUTION OF STATISTICAL DISTRIBUTION OF PIT GEOMETRIC PARAMETERS UNDER FATIGUE LOADING
ZHOU Xiangyang;KE Wei;ZANG Qishan Institute of Corrosion and Protection of Metal. Academia Sinica; Shenyang Institute of Metal Research; Academia Sinica; Shenyang Institute of Corrosion and Protection of Metal;Academia Sinica; Shenyang 110015
引用本文:

周向阳;柯伟;臧启山. 交变载荷下点蚀坑的统计分布及演化[J]. 金属学报, 1990, 26(2): 110-115.
, , . EVOLUTION OF STATISTICAL DISTRIBUTION OF PIT GEOMETRIC PARAMETERS UNDER FATIGUE LOADING[J]. Acta Metall Sin, 1990, 26(2): 110-115.

全文: PDF(491 KB)  
摘要: 通过海洋工程结构钢A537的喷盐雾腐蚀疲劳试验,经阶段取样观察及定量金相分析得到了各种蚀坑参数的统计分布及分布演化规律。经统计分析发现深径比是控制裂纹萌生的参数。还发现,疲劳载荷(应力幅)不影响蚀坑萌生的快慢,但影响由蚀坑中萌生裂纹的快慢,裂纹萌生之前的蚀坑演化阶段也能反映出腐蚀疲劳的一般规律。
关键词 点蚀统计分布裂纹萌生交变载荷    
Abstract:The pits and pit-associated fatigue crack initiation of the offshorestructure steel A537cL1 have been investigated under saltwater spray condition. Thetests were interrupted on schedule to make plastic replica of corroded specimen surfaceon which many randomly distributed pits can be found. The development of the geometricparameters of pits was obtained and the statistical distributions of these parameterswere determined. Instead of depth, the ratio of depth to width is the most domi-nant parameter in relation to crack initiation. Also, the pitting was enhanced whenlow frequency or high stress range was applied and although stress range has noeffect on the nucleation of pits, it can accelerate the initiation of cracks from pits.
Key wordspitting    statstical distribution    crack initiation    cyclic loading
收稿日期: 1990-02-18     
基金资助:国家自然科学基金
1 Ebara R, Kai T, Inoue K. ASTM STP 462, 1977: 155
2 Zhang Q S, Ke W. Corrosion Fatigue Behavior of Structure Steels in Seawater under Constant Immersion and Intermittent Wetting, Conf Proc The 1986 Asian Inspecticn, Repair and Maintenance for Offshore and Marine Industuies, Singapore, 1986
3 Kitagawa H, Fujita T, Miyazawa K. ASTM STP 642, 1976: 98
4 Congleton J, Olieh R A, Parkins R N. Met Technol, 1982; 9: 94
5 Gainer L J, Wallwork G R. Corrosion, 1979; 35: 435
6 Turnbull A. Rev Coat Corros, 1982; 5: 141
[1] 张奇亮, 王玉超, 李光达, 李先军, 黄一, 徐云泽. EH36钢在不同粒径沙砾冲击下的冲刷腐蚀耦合损伤行为[J]. 金属学报, 2023, 59(7): 893-904.
[2] 夏大海, 计元元, 毛英畅, 邓成满, 祝钰, 胡文彬. 2024铝合金在模拟动态海水/大气界面环境中的局部腐蚀机制[J]. 金属学报, 2023, 59(2): 297-308.
[3] 常立涛. 压水堆主回路高温水中奥氏体不锈钢加工表面的腐蚀与应力腐蚀裂纹萌生:研究进展及展望[J]. 金属学报, 2023, 59(2): 191-204.
[4] 孙阳庭, 李一唯, 吴文博, 蒋益明, 李劲. CaMg掺杂下夹杂物对C70S6非调质钢点蚀行为的影响[J]. 金属学报, 2022, 58(7): 895-904.
[5] 李细锋, 李天乐, 安大勇, 吴会平, 陈劼实, 陈军. 钛合金及其扩散焊疲劳特性研究进展[J]. 金属学报, 2022, 58(4): 473-485.
[6] 吕晨曦, 孙阳庭, 陈斌, 蒋益明, 李劲. 恒电位脉冲技术对317L不锈钢点蚀行为及耐点蚀性能的影响[J]. 金属学报, 2021, 57(12): 1607-1613.
[7] 王力,董超芳,张达威,孙晓光,Thee Chowwanonthapunya,满成,肖葵,李晓刚. 合金元素对铝合金在泰国曼谷地区初期腐蚀行为的影响[J]. 金属学报, 2020, 56(1): 119-128.
[8] 李恺强, 杨璐嘉, 徐云泽, 王晓娜, 黄一. SO42-对模拟孔隙液中Q235B钢筋腐蚀行为的影响[J]. 金属学报, 2019, 55(4): 457-468.
[9] 冯浩,李花兵,路鹏冲,杨纯田,姜周华,武晓雷. 铜绿假单胞菌对CrCoNi中熵合金微生物腐蚀行为的影响[J]. 金属学报, 2019, 55(11): 1457-1468.
[10] 马歌, 左秀荣, 洪良, 姬颖伦, 董俊媛, 王慧慧. 深海用X70管线钢焊接接头腐蚀行为研究[J]. 金属学报, 2018, 54(4): 527-536.
[11] 王晋, 张跃飞, 马晋遥, 李吉学, 张泽. Inconel 740H合金原位高温拉伸微裂纹萌生扩展研究[J]. 金属学报, 2017, 53(12): 1627-1635.
[12] 范林,丁康康,郭为民,张彭辉,许立坤. 静水压力和预应力对新型Ni-Cr-Mo-V高强钢腐蚀行为的影响*[J]. 金属学报, 2016, 52(6): 679-688.
[13] 张子龙, 夏爽, 曹伟, 李慧, 周邦新, 白琴. 晶界特征对316不锈钢沿晶应力腐蚀开裂裂纹萌生的影响*[J]. 金属学报, 2016, 52(3): 313-319.
[14] 何岳,向嵩,石维,刘建敏,梁宇,陈朝轶. 冷拔珠光体钢的组织演变对其点蚀行为的影响*[J]. 金属学报, 2016, 52(12): 1536-1544.
[15] 杨建海,张玉祥,葛利玲,陈家照,张鑫. 2A14铝合金混合表面纳米化对电化学腐蚀行为的影响*[J]. 金属学报, 2016, 52(11): 1413-1422.