Please wait a minute...
金属学报  2012, Vol. 48 Issue (3): 257-263    DOI: 10.3724/SP.J.1037.2011.00731
  论文 本期目录 | 过刊浏览 |
镍基粉末冶金高温合金中γ'相形态不稳定性研究
胡本芙1), 刘国权1, 2), 吴凯1), 田高峰1)
1) 北京科技大学材料科学与工程学院, 北京 100083
2) 北京科技大学新金属材料国家重点实验室, 北京 100083
MORPHOLOGICAL INSTABILITY OF γ' PHASE IN NICKEL-BASED POWDER METALLURGY SUPERALLOYS
HU Benfu1),  LIU Guoquan1, 2), WU Kai1),  TIAN Gaofeng1)
1) School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083
2) State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083
全文: PDF(7046 KB)  
摘要: 较系统地研究了低错配度FGH98I和FGH96合金在热处理条件下γ'相的形态演化行为. 结果表明: γ'相的形态失稳形式可归纳为γ'相分裂和γ'相不稳定长出形态, γ'相分裂主要是γ/γ'相间弹性应变场的各向异性和溶质元素富集相互作用造成, 而形状不规则的不稳定长出形态主要是由于基体或晶界局部溶质原子浓度(或过饱和度)变化导致γ'相的非平衡性生长, 讨论了γ'相分裂和不稳定长出形态同时发生现象, 及不连续脱溶析出导致扇形结构的形成机理.
关键词 镍基粉末高温合金γ'析出错配度    
Abstract:The morphological evolution and its regularity of γ'  precipitates in the low mismatch alloys powder metallurgy (P/M) FGH98I and FGH96 under different heat treatment conditions were studied systematically. The results show that the morphological instability of γ'  phase can be summarized as the splitting and unstable protrusion. The splitting of γ'  phase is caused by the interaction of anisotropic elastic strain field between γ'  phase and $\gamma$ matrix which is rich in solute atoms. While the irregular morphology of unstabe protrusion is mainly due to the concentration changes of solute atoms in the matrix or in the local places along grain boundaries, leading to the non-equilibrium growth of γ'  phase. The coexist phenomenon of splitting and unstable protrusion, the formation mechanism of fan type structure induced by discontinous precipitation are discussed respectively.
Key wordsnickel-based powder metallurgy superalloy    γ'     phase    precipitation    mismatch
收稿日期: 2011-11-25     
ZTFLH: 

TF125.212

 
基金资助:

国家预研基金项目9140A12070507QT0202 和国家高技术研究发展计划项目2007AA03A223资助

通讯作者: 胡本芙     E-mail: hupenghui2000@163.com
Corresponding author: HU Benfu     E-mail: hupenghui2000@163.com
作者简介: 胡本芙, 男, 1937年生, 教授

引用本文:

胡本芙 刘国权 吴凯 田高峰. 镍基粉末冶金高温合金中γ'相形态不稳定性研究[J]. 金属学报, 2012, 48(3): 257-263.
HU Ben-Fu, LIU Guo-Quan, WU Kai, TIAN Gao-Feng. MORPHOLOGICAL INSTABILITY OF γ' PHASE IN NICKEL-BASED POWDER METALLURGY SUPERALLOYS. Acta Metall Sin, 2012, 48(3): 257-263.

链接本文:

https://www.ams.org.cn/CN/10.3724/SP.J.1037.2011.00731      或      https://www.ams.org.cn/CN/Y2012/V48/I3/257

[1] Doi M, Miyazaki T, Wakatsuki T. Mater Sci Eng, 1984; 67: 247

[2] Doi M, Miyazaki T, Wakatsuki T. Mater Sci Eng, 1985; 74: 139

[3] Qiu Y Y. J Alloy Compd, 1998; 270: 145

[4] Leo P H, Lowengrub T S. Acta Mater, 2001; 49: 2761

[5] Lee J K. Theor Appl Fract Mech, 2000; 33: 207

[6] Yang A, Xiong Y, Liu L. Sci Technol Adv Mater, 2001; 2: 105

[7] Banerjee D, Banerjee R, Wang Y. Scr Mater, 1999; 41: 1023

[8] Li D Y, Chen L Q. Acta Mater, 1999; 47: 247

[9] Cha P R, Yeon D H. Chung S H. Scr Mater, 2005; 52: 1241

[10] Khachaturyan A G, Semenovskaya S V, Morris Jr J W. Acta Metall, 1988; 36: 1563

[11] Yoo Y S. Scr Mater, 2005; 53: 81

[12] Radis R, Schaffer M. Superalloy 2008, Warrendale, PA: TMS, 2008: 829

[13] Furrer D. Scr Mater, 1999; 40: 1215

[14] Qiu Y Y. Acta Mater, 1996; 44: 4969

[15] Jackson M P, Reed R C. Mater Sci Eng, 1999; A259: 1241

[16] Hazotte A, Grosdidier T, Denis S. Scr Mater, 1996; 34(4): 60

[17] Gerold V, translated by Wang P X et al. Material Science and Technology: Solid Structre. Beijing: Science Press, 1998: 184

(Gerold V著, 王佩璇等译. 材料科学与技术丛书: 固体结构. 北京: 科学出版社, 1998: 184)

[18] Mullins W W, Sekerka R F. J Appl Phys, 1963; 34: 323

[19] Ricks R A, Porter A J, Ecob R C. Acta Metall, 1983; 31: 43

[20] Mitchell R J, Preuss M, Tin S, Hardy M C. Mater Sci Eng, 2008; A473: 158

[21] Staron P, Kampmann R. Acta Mater, 2000; 48: 701

[22] Staron P, Kampmann R. Acta Mater, 2000; 48: 713

[23] Assadi H, Schroers J. Acta Mater, 2002; 50: 89
[1] 梁孟超, 陈良, 赵国群. 人工时效对2A12铝板力学性能和强化相的影响[J]. 金属学报, 2020, 56(5): 736-744.
[2] 刘振宝,梁剑雄,苏杰,王晓辉,孙永庆,王长军,杨志勇. 高强度不锈钢的研究及发展现状[J]. 金属学报, 2020, 56(4): 549-557.
[3] 罗海文,沈国慧. 超高强高韧化钢的研究进展和展望[J]. 金属学报, 2020, 56(4): 494-512.
[4] 孙新军,刘罗锦,梁小凯,许帅,雍岐龙. 高钛耐磨钢中TiC析出行为及其对耐磨粒磨损性能的影响[J]. 金属学报, 2020, 56(4): 661-672.
[5] 蔡超,李煬,李劲风,张昭,张鉴清. 2A97 Al-Li合金薄板时效析出与电位及晶间腐蚀的相关性研究[J]. 金属学报, 2019, 55(8): 958-966.
[6] 张正延,柴锋,罗小兵,陈刚,杨才福,苏航. 调质态含Cu高强钢的强化机理及钢中Cu的析出行为[J]. 金属学报, 2019, 55(6): 783-791.
[7] 林晓冬,彭群家,韩恩厚,柯伟. 退火对热老化308L不锈钢焊材显微结构的影响[J]. 金属学报, 2019, 55(5): 555-565.
[8] 杜娟, 程晓行, 杨天南, 陈龙庆, Mompiou Frédéric, 张文征. 奥氏体析出相激发形核的原位TEM研究[J]. 金属学报, 2019, 55(4): 511-520.
[9] 黄宇, 成国光, 李世健, 代卫星. Ce微合金化H13钢中一次碳化物的析出机理及热稳定性研究[J]. 金属学报, 2019, 55(12): 1487-1494.
[10] 朱上,李志辉,闫丽珍,李锡武,张永安,熊柏青. Zn添加对预时效态Al-Mg-Si-Cu合金自然时效和烘烤硬化性的影响[J]. 金属学报, 2019, 55(11): 1395-1406.
[11] 马国楠, 王东, 刘振宇, 毕胜, 昝宇宁, 肖伯律, 马宗义. 热压烧结温度对SiC/Al-Zn-Mg-Cu复合材料微观结构与力学性能的影响[J]. 金属学报, 2019, 55(10): 1319-1328.
[12] 向雪梅, 赖玉香, 刘春辉, 陈江华. 微合金化元素Sn对Al-Mg-Si合金高温时效强化相析出路径的改变[J]. 金属学报, 2018, 54(9): 1273-1280.
[13] 黄明亮, 孙洪羽. 倒装芯片无铅凸点β-Sn晶粒取向与电迁移交互作用[J]. 金属学报, 2018, 54(7): 1077-1086.
[14] 高志明, 介万奇, 刘永勤, 罗海军. 微观孔洞和逆偏析缺陷的形成机理与耦合预测研究进展[J]. 金属学报, 2018, 54(5): 717-726.
[15] 张宇, 王清, 董红刚, 董闯, 张洪宇, 孙晓峰. 基于团簇模型设计的镍基单晶高温合金(Ni, Co)-Al-(Ta, Ti)-(Cr, Mo, W)及其在900 ℃下1000 h的长期时效行为[J]. 金属学报, 2018, 54(4): 591-602.