EFFECTS OF THE WELD THERMAL CYCLE ON MICROSTRUCTURE AND PROPERTIES OF THE HEAT-AFFECTED ZONE OF HQ130 STEEL

Acta Metall Sin

1996, Vol. 32

Issue (5): 532-537 DOI:

Current Issue | Archive | Adv Search

EFFECTS OF THE WELD THERMAL CYCLE ON MICROSTRUCTURE AND PROPERTIES OF THE HEAT-AFFECTED ZONE OF HQ130 STEEL

LI Yajiang;ZOU Zengda;CHEN Zhunian;WEI Hing(Shandong Polytechnic University; Jinan 250014); JIANG Quanchang(Engineering Machinery Co. Ltd. Xiamen361004)(Manuscript received 1995-10-04)

Cite this article:

LI Yajiang;ZOU Zengda;CHEN Zhunian;WEI Hing(Shandong Polytechnic University; Jinan 250014); JIANG Quanchang(Engineering Machinery Co. Ltd. Xiamen361004)(Manuscript received 1995-10-04). EFFECTS OF THE WELD THERMAL CYCLE ON MICROSTRUCTURE AND PROPERTIES OF THE HEAT-AFFECTED ZONE OF HQ130 STEEL. Acta Metall Sin, 1996, 32(5): 532-537.

Download:

PDF(509KB)
Export: BibTeX | EndNote (RIS)

Abstract The effects of the different peak temperatures(T_m) and cooling times(t) on the microstructure, hardness, impact toughness and fracture morphology of heat-affected zone(HAZ) of HQ130 steel were investigated by means of the weld thermo-simulation test.Experimental results indieated that the impact toughness and hardness were decreased with the decrease in T_m or increase in cooling time under the condition of single thermal cycle. There was brittle zone in the vicinity of T_m = 800℃ . where the impact toughness was obviously lower, and softened zone in 700℃, where the hardness obviously decreased but toughness increased. In practicalwelding, the multi-layer and multi-pass welding, in which the welding heat input was strictly limited (t≤20 s), should be applied to reduce softness and brittleness in HAZ of HQ130 steel.

Key words: high strength steel welding thermal cycle heat-affected zone microstructure impact toughness

Received: 18 May 1996

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1996/V32/I5/532

1罗志昌,姚钦,田燕,张伟民,郎毅,侯丽．焊接学报,1990;11(3):1692尹士科,王移山．钢铁研究学报,1991;1:653HassonDF,ZanisCA,AndersonDR．MeldJ,1984;63(6):1974FraserFW,MetzbowerEA．WeldJ,1982;61(4):1125ChenC,ThomponAW,BernsteinIM．MetallTrans,1980;11A:1723

[1]	GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[2]	WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[3]	ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800^oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[4]	LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[5]	CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[6]	LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[7]	LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[8]	SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[9]	ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y₂O₃ Content on Properties of Fe-Y₂O₃ Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[10]	FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti₂AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[11]	WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[12]	WANG Fa, JIANG He, DONG Jianxin. Evolution Behavior of Complex Precipitation Phases in Highly Alloyed GH4151 Superalloy[J]. 金属学报, 2023, 59(6): 787-796.
[13]	GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[14]	LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667.
[15]	WANG Changsheng, FU Huadong, ZHANG Hongtao, XIE Jianxin. Effect of Cold-Rolling Deformation on Microstructure, Properties, and Precipitation Behavior of High-Performance Cu-Ni-Si Alloys[J]. 金属学报, 2023, 59(5): 585-598.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed