Effects of Cold Deformation on Microstructure And Mechanical Behavior of a High Nitrogen Austenitic Stainless Steel

Acta Metall Sin

2007, Vol. 43

Issue (7): 713-718 DOI:

Research Articles

Current Issue | Archive | Adv Search

Effects of Cold Deformation on Microstructure And Mechanical Behavior of a High Nitrogen Austenitic Stainless Steel

WANG Songtao; YANG Ke; SHAN Yiyin;LI Laifeng

Technical Institute of Physics and Chemistry; Chinese Academy of Sciences

Cite this article:

WANG Songtao; YANG Ke; SHAN Yiyin; LI Laifeng. Effects of Cold Deformation on Microstructure And Mechanical Behavior of a High Nitrogen Austenitic Stainless Steel. Acta Metall Sin, 2007, 43(7): 713-718 .

Download:

PDF(953KB)
Export: BibTeX | EndNote (RIS)

Key words: high nitrogen steel cold deformation microstructure mechanical properties

Received: 01 February 2007

ZTFLH:

TG142.25

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	WANG Songtao
	YANG Ke
	SHAN Yiyin
	LI Laifeng

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2007/V43/I7/713

[1]Kamachi M U,Raj B,In:Kamachi M U,Raj B eds.,High Nitrogen Steels and Stainless Steels.New Delhi:Narosa Publishing House,2004:8
[2]Simmons J W.Mater Sci Eng,1996;A207:159
[3]Sailer G,Aigner H.In:Speidel M O,Kowanda C,Diener M eds.,HNS-2003 Conf Proc,Zurich:vdf Hochschulver- lag,2003:341
[4]Bernauer J N,Saller G.Trans Ind Inst Met,2002;55:193
[5]Stein G,Menzel J,In:Speidel M O,Uggowitzer P J eds., Ergebnisseder Werkstoff-Forschung,Band 4:Stickstof- flegierte Stahle,Zurich:Thubal-Kain,1991:33
[6]Wang S T,Yang K,Shan Y Y,Li L F.Acta Metall Sin, 2007;43:171 (王松涛,杨柯,单以银,李来风．金属学报．2007;43:171)
[7]Liu S X,Liu X M,Wang W M.Iron Steel,2005;40(11): 67 (刘树勋,刘宪民,王维明．钢铁,2005;40(11):67)
[8]Llewellyn D T.Mater Sci Technol,1997;13:389
[9]Simmons J W.Acta Mater,1997;45:2467
[10]Mullner P,Solenthaler C,Uggowitzer P,Speidel M O. Mater Sci Eng,1993;A164:164
[11]Soussan A,Degallaix S,Magnin T.Mater Sci Eng,1991; A142:169
[12]Voce E.J lnst Met,1948;74:537
[13]Swift H W.Mech J.Phys Solids,1952;1:1
[14]Ludwigson D C.Metall Trans,1971;2:2825
[15]Gavriljuk V G,Stein G,Berns H.Steel Res,2003;74:444
[16]WeiβS,Dudzinski W,Tikhovskiy I.In:Akdut N,Cooman B C,Foct J.eds.,HNS-2004 Conf Proc,Bad Harzburg: GRIPS media,2004:239
[17]Simmons J W.Acta Mater,1997;45:2467
[18]Mullner P,Solenthaler C,Uggowitzer P,Speidel M O. Mater Sci Eng,1993;A164:164
[19]Gavriljuk V G,Berns H.High Nitrogen Steels.New York: Springer-Verlag,1999:162
[20]Sailer G,Spiradek-Hahn K,Scheu C,Clemens H.Mater Sci Eng,2006;A427:246
[21]Mannan S L,Samuel K G,Rodriguez P.Scr Metall,1982; 16:255
[22]Speidel M O.In:Kamachi M U,Raj Beds.,High Nitrogen Steels and Stainless Steels,New Delhi:Narosa Publishing House,2004:243
[23]Taillard R,Foct J.In:Foct J,Hendry A eds.,HNS-88 Conf Proc,London:The Institute of Metals,1989:387
[24]Gavriljuk V,Petrov Y,Shanina B.Scr Mater,2006;55(6): 537
[25]Stoltz R E,Vander Sande J B.Metall Trans,1980;11A: 1033
[26]Balachandran G.In:Kamachi M U,Raj Beds.,High Nitrogen Steels and Stainless Steels,New Delhi:Narosa Publishing House,2004:74
[27]Vijayalakshmi M,Shankar P,Sudha C.In:Kamachi M U,Raj Beds.,High Nitrogen Steels and Stainless Steels, New Delhi:Narosa Publishing House,2004:125

[1]	WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[2]	GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[3]	ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800^oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[4]	LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[5]	CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[6]	LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[7]	LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[8]	SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[9]	ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y₂O₃ Content on Properties of Fe-Y₂O₃ Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[10]	WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776.
[11]	WANG Fa, JIANG He, DONG Jianxin. Evolution Behavior of Complex Precipitation Phases in Highly Alloyed GH4151 Superalloy[J]. 金属学报, 2023, 59(6): 787-796.
[12]	GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[13]	FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti₂AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[14]	LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667.
[15]	WANG Changsheng, FU Huadong, ZHANG Hongtao, XIE Jianxin. Effect of Cold-Rolling Deformation on Microstructure, Properties, and Precipitation Behavior of High-Performance Cu-Ni-Si Alloys[J]. 金属学报, 2023, 59(5): 585-598.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed