Acta Metall Sin  1988, Vol. 24 Issue (6): 426-431    DOI:

Current Issue | Archive | Adv Search |

MEASUREMENT OF K_(IC) OF MEDIAN OR LOW STRENGTH STEEL USING ROUND BARS WITH CIRCUMFERENCIAL CRACK

LIU Zaihua;ZHAO Dongli Huazhong University of Science and Technology; Wuhan Bureau of Complete Sets of Equipment; State Machinery Commission; Beijing Manuscript received 26 January; 1984; revised manuscript 22 August; 1987

LIU Zaihua;ZHAO Dongli Huazhong University of Science and Technology; Wuhan Bureau of Complete Sets of Equipment; State Machinery Commission; Beijing Manuscript received 26 January; 1984; revised manuscript 22 August; 1987. MEASUREMENT OF K_(IC) OF MEDIAN OR LOW STRENGTH STEEL USING ROUND BARS WITH CIRCUMFERENCIAL CRACK. Acta Metall Sin, 1988, 24(6): 426-431.

Abstract References Related Articles Recommended Metrics Download:  PDF(827KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The size effect of tension round bars with circumferencial crack wasdescribed and used to measure the planestrain fracture toughness K_(IC) of median orlow strength steel. The size of cylindrical specimen. required for K_(IC) measurement ismuch smaller than that of standard specimen. The J-integral values of the cylin-drical specimens were calculated to characterize the size effect. The finite elementcalculation and fracture morphology analysis have been conducted to explain thefact that smaller cylindrical specimen could be used to measure K_(IC) of median orlow strength steel. Key words:  median or low strength steel      fracture toughness      round bars specimen      Received:  18 June 1988      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1988/V24/I6/426 1 Jones M H, Bubsey R T, Bucci R J, Collis S F, et al. Development in Fracture Mechanics Test Methods Standardization, ASTM STP 632, 1977: 115--152 2 Bueckner H F. Fracture Toughness and its Applecations, ASTM STP 381, 1965: 82 3 Rice J R, Paris P C, Merkle J G. Progress in Filaw Growth and Fracture Toughness Testing, ASTM STP536, Philadelphia: ASTM, 1973: 231--244 4 肖纪美.金属的韧性与韧化,第二章,上海科技出版社,1980:27--85 5 Hoffman O,Sachs G.乔端,孙梁译.工程塑性力学基础,中国工业出版社,1965:154--157 6 Качанов Л М.周承倜,唐照千译.塑性理论基础,高等教育出版社,1965:203\ [1] GU Ruicheng, ZHANG Jian, ZHANG Mingyang, LIU Yanyan, WANG Shaogang, JIAO Da, LIU Zengqian, ZHANG Zhefeng. Fabrication of Mg-Based Composites Reinforced by SiC Whisker Scaffolds with Three-Dimensional Interpenetrating-Phase Architecture and Their Mechanical Properties[J]. 金属学报, 2022, 58(7): 857-867. [2] HU Chen, PAN Shuai, HUANG Mingxin. Strong and Tough Heterogeneous TWIP Steel Fabricated by Warm Rolling[J]. 金属学报, 2022, 58(11): 1519-1526. [3] CHEN Ruirun, CHEN Dezhi, WANG Qi, WANG Shu, ZHOU Zhecheng, DING Hongsheng, FU Hengzhi. Research Progress on Nb-Si Base Ultrahigh Temperature Alloys and Directional Solidification Technology[J]. 金属学报, 2021, 57(9): 1141-1154. [4] Yizhe LI, Baoming GONG, Xiuguo LIU, Dongpo WANG, Caiyan DENG. Out-of-Plane Constraint Effect on the Fracture Toughness of Single Edge Notch Tension Specimens[J]. 金属学报, 2018, 54(12): 1785-1791. [5] Xiangli FENG,Lei WANG,Yang LIU. STUDY ON MICROSTRUCTURE AND DYNAMIC FRACTURE BEHAVIOR OF Q460 STEEL WELDING JOINTS[J]. 金属学报, 2016, 52(7): 787-796. [6] Yong SHEN,Jian XU. PREPARATION AND MECHANICAL PROPERTIES OF Zr46.9Cu45.5Al5.6Y2.0 IN SITU BMG COMPOSITES WITH B2-CuZr PHASE[J]. 金属学报, 2015, 51(11): 1407-1415. [7] ZHU Zhendong, XU Jian. Cu56Hf27Ti17 BULK METALLIC GLASS WITH HIGH FRACTURE TOUGHNESS[J]. 金属学报, 2013, 49(8): 969-975. [8] BI Zongyue, YANG Jun, NIU Jing, ZHANG Jianxun. FRACTURE TOUGHNESS OF WELDED JOINTS OF X100 HIGH-STRENGTH PIPELINE STEEL[J]. 金属学报, 2013, 49(5): 576-582. [9] SUN Qian, WANG Xiaonan, ZHANG Shunhu, DU Linxiu, DI Hongshuang. EFFECT OF MICROSTRUCTURE ON FRACTURE TOUGHNESS OF NEW TYPE HOT—ROLLED NANO—SCALE PRECIPITATION STRENGTHENING STEEL[J]. 金属学报, 2013, 49(12): 1501-1507. [10] JIA Xiaojiao ZHANG Jun SU Haijun SONG Kan LIU Lin FU Hengzhi. MICROSTRUCTURES AND MECHANICAL PROPERTIES OF Al2O3–BASIC EUTECTIC IN SITU COMPOSITES DIRECTIONALLY SOLIDIFIED BY LASER FLOATING ZONE REMELTING[J]. 金属学报, 2012, 48(12): 1479-1486. [11] MA Yue PAN Tao JIANG Bo CUI Yinhui SU Hang PENG Yun . STUDY OF THE EFFECT OF SULFUR CONTENTS ON FRACTURE TOUGHNESS OF RAILWAY WHEEL STEELS FOR HIGH SPEED TRAIN[J]. 金属学报, 2011, 47(8): 978-983. [12] ZHANG Xin ZHANG Jinyu LIU Gang ZHANG Guojun SUN Jun. LENGTH SCALE DEPENDENT DUCTILITY AND FRACTURE BEHAVIOR OF Cu/Nb NANOSTRUCTURED METALLIC MULTILAYERS[J]. 金属学报, 2011, 47(2): 246-250. [13] XU Zejian; LI Yulong; LI Na; LIU Yuanyong. EFFECT OF LOADING RATE ON MODE I DYNAMIC FRACTURE TOUGHNESS OF HIGH STRENGTH STEELS 40Cr AND 30CrMnSiNi2A[J]. 金属学报, 2006, 42(9): 965-970 . [14] WANG Yugui; QIAO Lijie; GAO Kewei; SU Yanjing; CHU Wuyang; WANG Zhonglin. Measurement of the Fracture Toughness and Critical Stress for Cracking in SnO2 Nanobelts Using Nanoindentation[J]. 金属学报, 2004, 40(6): 594-. [15] LIANG Yilong; LEI Min; ZHONG Shuhui; JIANG Shan (Guizhou University of Technology; Guiyang 550003)Correspondent: LIANG Yilong; associate professor; Tel. (0851)4818011; Fax: (0851)4818381. THE RELATIONSHIP BETWEEN FRACTURE TOUGHNESS AND NOTCH TOUGHNESS, TENSILE DUCTILITIES IN LATH MARTENSITE STEEL[J]. 金属学报, 1998, 34(9): 950-958. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed