STRUCTURE PARAMETER AND TENSILE PROPERTIES OF UNIDIRECTIONALLY SOLIDIFIED Fe-C EUTECTIC ALLOY

Acta Metall Sin

1993, Vol. 29

Issue (9): 35-41 DOI:

Current Issue | Archive | Adv Search

STRUCTURE PARAMETER AND TENSILE PROPERTIES OF UNIDIRECTIONALLY SOLIDIFIED Fe-C EUTECTIC ALLOY

JIANG Jianqing Southeast University; Nanjing

Cite this article:

JIANG Jianqing Southeast University; Nanjing. STRUCTURE PARAMETER AND TENSILE PROPERTIES OF UNIDIRECTIONALLY SOLIDIFIED Fe-C EUTECTIC ALLOY. Acta Metall Sin, 1993, 29(9): 35-41.

Download:

PDF(2407KB)
Export: BibTeX | EndNote (RIS)

Abstract The effect of solidification rate on the solid/liquid interface morphology,microstructure and longitudinal tensile properties of unidirectionally solidified Fe-C eutecticalloy was investigated. With the help of computer image analysis system, the irregular degreeof graphite flakes was defined, which can be used to represent the graphite flake distributionstate. Plots of variation of the solidification rates vs irregular degree and tensile properties arepresented.

Key words: Fe-C eutectic unidirectional solidification irregular degree tensile property

Received: 18 September 1993

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1993/V29/I9/35

1 Eilliott A. Eutectic Solidification Processing. London: Butterworths, 1983: 48
2 Kurz W,Fisher D J著;毛协民,包冠乾译.凝固原理.西安:西北工业大学出版社,1987:95
3 胡汉起.金属凝固.北京:冶金工业出版社,1985:215
4 蒋建清.东南大学博士学位论文,1990
5 蒋建清,舒光冀.东南大学学报,1991;(6) :92
6 Jiang Jianqing. In: Yan Dongsheng, Shi Changxu, Li Hengde eds., China--MRS International 1990 Symposium, Vol.Ⅴ, Holland: Elsevier, 1991: 200
7 蒋建清.东南大学学报,1993:(2) :19

[1]	WANG Di, HE Lili, WANG Dong, WANG Li, ZHANG Siqian, DONG Jiasheng, CHEN Lijia, ZHANG Jian. Influence of Pt-Al Coating on Tensile Properties of DD413 Alloy at High Temperatures[J]. 金属学报, 2023, 59(3): 424-434.
[2]	SUN Tengteng, WANG Hongze, WU Yi, WANG Mingliang, WANG Haowei. Effect ofIn Situ 2%TiB₂ Particles on Microstructure and Mechanical Properties of 2024Al Additive Manufacturing Alloy[J]. 金属学报, 2023, 59(1): 169-179.
[3]	LIU Xianfeng, LIU Dong, LIU Renci, CUI Yuyou, YANG Rui. Microstructure and Tensile Properties of Ti-43.5Al-4Nb-1Mo-0.1B Alloy Processed by Hot Canned Extrusion[J]. 金属学报, 2020, 56(7): 979-987.
[4]	LI Yuancai, JIANG Wugui, ZHOU Yu. Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites[J]. 金属学报, 2020, 56(5): 776-784.
[5]	YU Chenfan, ZHAO Congcong, ZHANG Zhefeng, LIU Wei. Tensile Properties of Selective Laser Melted 316L Stainless Steel[J]. 金属学报, 2020, 56(5): 683-692.
[6]	WANG Xi,LIU Renci,CAO Ruxin,JIA Qing,CUI Yuyou,YANG Rui. Effect of Cooling Rate on Boride and Room Temperature Tensile Properties of β-Solidifying γ-TiAl Alloys[J]. 金属学报, 2020, 56(2): 203-211.
[7]	Zheng LIU,Jianrong LIU,Zibo ZHAO,Lei WANG,Qingjiang WANG,Rui YANG. Microstructure and Tensile Property of TC4 Alloy Produced via Electron Beam Rapid Manufacturing[J]. 金属学报, 2019, 55(6): 692-700.
[8]	Dechun REN, Huhu SU, Huibo ZHANG, Jian WANG, Wei JIN, Rui YANG. Effect of Cold Rotary-Swaging Deformation on Microstructure and Tensile Properties of TB9 Titanium Alloy[J]. 金属学报, 2019, 55(4): 480-488.
[9]	Shenghu CHEN, Lijian RONG. Microstructure Evolution During Solution Treatment and Its Effects on the Properties of Ni-Fe-Cr Alloy[J]. 金属学报, 2018, 54(3): 385-392.
[10]	Dongdong LI, Lihe QIAN, Shuai LIU, Jiangying MENG, Fucheng ZHANG. Effect of Manganese Content on Tensile Deformation Behavior of Fe-Mn-C TWIP Steels[J]. 金属学报, 2018, 54(12): 1777-1784.
[11]	Rui CHEN, Qingyan XU, Huiting GUO, Zhiyuan XIA, Qinfang WU, Baicheng LIU. Modeling of Strain Hardening Behavior and Mechanical Properties of Al-7Si-Mg Cast Aluminum AlloysDuring Tensile Process[J]. 金属学报, 2017, 53(9): 1110-1124.
[12]	Mingzhe XI, Chao LV, Zhenhao WU, Junying SHANG, Wei ZHOU, Rongmei DONG, Shiyou GAO. Microstructures and Mechanical Properties of TC11 Titanium Alloy Formed by Laser Rapid Forming and Its Combination with Consecutive Point-Mode Forging[J]. 金属学报, 2017, 53(9): 1065-1074.
[13]	Jinxia YANG,Futao XU,Donglin ZHOU,Yuan SUN,Xingyu HOU,Chuanyong CUI. Effects of Re-Melting Processes on the Tensile Properties of K452 Alloy at High Temperature[J]. 金属学报, 2017, 53(6): 703-708.
[14]	Mingzhe XI,Wei ZHOU,Junying SHANG,Chao LV,Zhenhao WU,Shiyou GAO. Effect of Heat Treatment on Microstructure and Mechanical Properties of Consecutive Point-Mode Forging and Laser Rapid Forming GH4169 Alloy[J]. 金属学报, 2017, 53(2): 239-247.
[15]	Fenjun LIU, Li FU, Haiyan CHEN. Microstructures and Mechanical Properties of Thin Plate Aluminium Alloy Joint Prepared by High Rotational Speed Friction Stir Welding[J]. 金属学报, 2017, 53(12): 1651-1658.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed