Plastic Strain Ratio Calculation of Metal Sheet from Low-Resolution Texture Analysis

Acta Metall Sin

2004, Vol. 40

Issue (5): 555-560 DOI:

Research Articles

Current Issue | Archive | Adv Search

Plastic Strain Ratio Calculation of Metal Sheet from Low-Resolution Texture Analysis

JIANG Qiwu; LIU Yandong; ZHANG Jingang; LIU Rendong; ZHANG Xiaogang;ZUO Liang

Anshan New Steel Company; Iron and Steel Group Corporation; Anshan 114021；School of Materials and Metallurgy; Northeastern University; Shenyang 110004；School of Materials and Metallurgy; Anshan Technology University; Anshan 114004

Cite this article:

JIANG Qiwu; LIU Y; ong; ZHANG Jingang; LIU Rendong; ZHANG Xiaogang; ZUO Liang. Plastic Strain Ratio Calculation of Metal Sheet from Low-Resolution Texture Analysis. Acta Metall Sin, 2004, 40(5): 555-560 .

Download:

PDF(2829KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the models of continues mechanics of textured polycrystals (CMTP) and Kochendőrfer in which the quadric yield function form is employed, the plastic strain ratio (R-values) of polycrystalline metal (deep-drawing IF steel sheets) is calculated by the approaches of modified maximum entropy method (MMEM) of low-resolution texture analysis and harmonic method. The computed results indicate that the MMEM of low-resolution texture analysis can predict the R values accurately.

Key words: IF steel sheet texture plastic strain ratio

Received: 27 January 2003

ZTFLH:	TB115
	TG142.21

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	JIANG Qiwu
	LIU Y
	ong
	ZHANG Jingang
	LIU Rendong
	ZHANG Xiaogang
	ZUO Liang

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2004/V40/I5/555

[1] Schmid E, Boas W. Plasticity of Crystals. London: Champman and Hall, 1968:104
[2] Hultgren F A. Blast Furan Steel Plant, 1968; 149:156
[3] Royer F, Mohr J M, Tavard C, Parniére P. Mém Sci Rev Métall, 1977; 74:449
[4] Wang Y D, Xu J Z, Luo L, Liang Z D. In: Liang Z D, Zuo L, Chu Y Y, eds., Proc Int 11th Conf on Textures of Materials, Beijing: China Building Industry Press, 1996: 1064
[5] Lequeu Ph, Gilorrnini P, Montheillet F, Bacroix B, Jonas J J. Acta Metall, 1987; 35:1159
[6] Konchendōrfer A. Plastische Eigenschafen Von Krislatten and Metullischen Werkstoffen. Berlin: Springer-Verlag, 1941
[7] Zuo L, Xu J Z, Liang Z D. Sci Chin, 1990; A(11) : 1217(左良,徐家桢,梁志德.中国科学,1990;A(11) :1217)R

[1]	CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074.
[2]	LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447.
[3]	JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556.
[4]	YANG Ping, WANG Jinhua, MA Dandan, PANG Shufang, CUI Feng'e. Influences of Composition on the Transformation-Controlled {100} Textures in High Silicon Electrical Steels Prepared by Mn-Removal Vacuum Annealing[J]. 金属学报, 2022, 58(10): 1261-1270.
[5]	DING Ning, WANG Yunfeng, LIU Ke, ZHU Xunming, LI Shubo, DU Wenbo. Microstructure, Texture, and Mechanical Properties of Mg-8Gd-1Er-0.5Zr Alloy by Multi-Directional Forging at High Strain Rate[J]. 金属学报, 2021, 57(8): 1000-1008.
[6]	YAN Mengqi, CHEN Liquan, YANG Ping, HUANG Lijun, TONG Jianbo, LI Huanfeng, GUO Pengda. Effect of Hot Deformation Parameters on the Evolution of Microstructure and Texture of β Phase in TC18 Titanium Alloy[J]. 金属学报, 2021, 57(7): 880-890.
[7]	ZUO Liang, LI Zongbin, YAN Haile, YANG Bo, ZHAO Xiang. Texturation and Functional Behaviors of Polycrystalline Ni-Mn-X Phase Transformation Alloys[J]. 金属学报, 2021, 57(11): 1396-1415.
[8]	XU Zhanyi, SHA Yuhui, ZHANG Fang, ZHANG Huabing, LI Guobao, CHU Shuangjie, ZUO Liang. Orientation Selection Behavior During Secondary Recrystallization in Grain-Oriented Silicon Steel[J]. 金属学报, 2020, 56(8): 1067-1074.
[9]	YU Lei,LUO Haiwen. Effect of Partial Recrystallization Annealing on Magnetic Properties and Mechanical Properties of Non-Oriented Silicon Steel[J]. 金属学报, 2020, 56(3): 291-300.
[10]	CHENG Chao,CHEN Zhiyong,QIN Xushan,LIU Jianrong,WANG Qingjiang. Microstructure, Texture and Mechanical Property ofTA32 Titanium Alloy Thick Plate[J]. 金属学报, 2020, 56(2): 193-202.
[11]	DU Zijie, LI Wenyuan, LIU Jianrong, SUO Hongbo, WANG Qingjiang. Study on the Uniformity of Structure and Mechanical Properties of TC4-DT Alloy Deposited by CMT Process[J]. 金属学报, 2020, 56(12): 1667-1680.
[12]	Xin LI,Yuecheng DONG,Zhenhua DAN,Hui CHANG,Zhigang FANG,Yanhua GUO. Corrosion Behavior of Ultrafine Grained Pure Ti Processed by Equal Channel Angular Pressing[J]. 金属学报, 2019, 55(8): 967-975.
[13]	Liping DENG,Kaixuan CUI,Bingshu WANG,Hongliang XIANG,Qiang LI. Microstructure and Texture Evolution of AZ31 Mg Alloy Processed by Multi-Pass Compressing Under Room Temperature[J]. 金属学报, 2019, 55(8): 976-986.
[14]	Zheng LIU,Jianrong LIU,Zibo ZHAO,Lei WANG,Qingjiang WANG,Rui YANG. Microstructure and Tensile Property of TC4 Alloy Produced via Electron Beam Rapid Manufacturing[J]. 金属学报, 2019, 55(6): 692-700.
[15]	Houlong LIU,Mingyu MA,Lingling LIU,Liangliang WEI,Liqing CHEN. Effect of Hot Band Annealing Processes on Texture and Formability of 19Cr2Mo1W Ferritic Stainless Steel[J]. 金属学报, 2019, 55(5): 566-574.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed