Acta Metall Sin  1996, Vol. 32 Issue (4): 429-432    DOI:

Current Issue | Archive | Adv Search |

COMBUSTION REACTION OF Ni_(20)Ti_(50)C_(30) DURING MECHANICAL ALLOYING

YE Lilei; HUANG Jianyu; LIU Zhiguang; QUAN Mingxiu(State Key Laboratory of RSA; Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110015) (Manuscript received 1995-06-13; in revised form 1995-09-26)

YE Lilei; HUANG Jianyu; LIU Zhiguang; QUAN Mingxiu(State Key Laboratory of RSA; Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110015) (Manuscript received 1995-06-13; in revised form 1995-09-26). COMBUSTION REACTION OF Ni_(20)Ti_(50)C_(30) DURING MECHANICAL ALLOYING. Acta Metall Sin, 1996, 32(4): 429-432.

Abstract References Related Articles Recommended Metrics Download:  PDF(297KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The combustion reaction was observed during mechanical alloying Ni_(20)Ti_(50)C_(30), and the agglomerates and powders coexisted in final product. With the analysis of X-ray diffraction (XRD) and the observation of scanning electron microscope (SEM), it is indicated that melting occurred in the combustion reaction. The product is composed of TiC phase and NiTi compound. It is regarded that the initial TiC is produced by the heavy collision of balls during milling, and then the large heat released from the TiC formation induces the latter reactions. Correspondent: YE Lilei,(Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015) Key words:  mechanical alloying      combustion reaction      melting      Ni_(20)Ti_(50)C_(30)      Received:  18 April 1996      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I4/429 1MaE,PaganJ,CranfordG,AtzmonM．JMaterRes,1993;8:18362WangKY,HeAQ,WangJT．MetallTrans,1993;24A:2253KruegerBR,MutzAH,VreelandTJr．MetallTrans,1992;23A:554ZhangS．MunirZA．JMaterSci,1991;26:36855YeLL,LiuZG,HuangJY,QuanMX．MaterLett,1995;25:1176AtzmonM．PhysRevLett,1990;64:4877SmithellsCJ．MetalsReferenceBook,5thed．,London:Butterworth,1976:3268MunirZA．CeramBull,1988:67:342F [1] HOU Juan, DAI Binbin, MIN Shiling, LIU Hui, JIANG Menglei, YANG Fan. Influence of Size Design on Microstructure and Properties of 304L Stainless Steel by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 623-635. [2] ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656. [3] FENG Li, WANG Guiping, MA Kai, YANG Weijie, AN Guosheng, LI Wensheng. Microstructure and Properties of AlCo x CrFeNiCu High-Entropy Alloy Coating Synthesized by Cold Spraying Assisted Induction Remelting[J]. 金属学报, 2023, 59(5): 703-712. [4] TANG Weineng, MO Ning, HOU Juan. Research Progress of Additively Manufactured Magnesium Alloys: A Review[J]. 金属学报, 2023, 59(2): 205-225. [5] WANG Hu, ZHAO Lin, PENG Yun, CAI Xiaotao, TIAN Zhiling. Microstructure and Mechanical Properties of TiB2 Reinforced TiAl-Based Alloy Coatings Prepared by Laser Melting Deposition[J]. 金属学报, 2023, 59(2): 226-236. [6] QI Zhao, WANG Bin, ZHANG Peng, LIU Rui, ZHANG Zhenjun, ZHANG Zhefeng. Effects of Stress Ratio on the Fatigue Crack Growth Rate Under Steady State of Selective Laser Melted TC4 Alloy with Defects[J]. 金属学报, 2023, 59(10): 1411-1418. [7] LU Haifei, LV Jiming, LUO Kaiyu, LU Jinzhong. Microstructure and Mechanical Properties of Ti6Al4V Alloy by Laser Integrated Additive Manufacturing with Alternately Thermal/Mechanical Effects[J]. 金属学报, 2023, 59(1): 125-135. [8] WANG Meng, YANG Yongqiang, Trofimov Vyacheslav, SONG Changhui, ZHOU Hanxiang, WANG Di. Effects of Particle Size on Processability of AlSi10Mg Alloy Manufactured by Selective Laser Melting[J]. 金属学报, 2023, 59(1): 147-156. [9] PENG Liming, DENG Qingchen, WU Yujuan, FU Penghuai, LIU Ziyi, WU Qianye, CHEN Kai, DING Wenjiang. Additive Manufacturing of Magnesium Alloys by Selective Laser Melting Technology: A Review[J]. 金属学报, 2023, 59(1): 31-54. [10] FANG Yuanzhi, DAI Guoqing, GUO Yanhua, SUN Zhonggang, LIU Hongbing, YUAN Qinfeng. Effect of Laser Oscillation on the Microstructure and Mechanical Properties of Laser Melting Deposition Titanium Alloys[J]. 金属学报, 2023, 59(1): 136-146. [11] YANG Chao, LU Haizhou, MA Hongwei, CAI Weisi. Research and Development in NiTi Shape Memory Alloys Fabricated by Selective Laser Melting[J]. 金属学报, 2023, 59(1): 55-74. [12] ZHU Guoliang, KONG Decheng, ZHOU Wenzhe, HE Jian, DONG Anping, SHU Da, SUN Baode. Research Progress on the Crack Formation Mechanism and Cracking-Free Design of γ' Phase Strengthened Nickel-Based Superalloys Fabricated by Selective Laser Melting[J]. 金属学报, 2023, 59(1): 16-30. [13] FENG Di, ZHU Tian, ZANG Qianhao, LEE Yunsoo, FAN Xi, ZHANG Hao. Solution Behavior of Spray-Formed Hypereutectic AlSiCuMg Alloy[J]. 金属学报, 2022, 58(9): 1129-1140. [14] YANG Tianye, CUI Li, HE Dingyong, HUANG Hui. Enhancement of Microstructure and Mechanical Property of AlSi10Mg-Er-Zr Alloys Fabricated by Selective Laser Melting[J]. 金属学报, 2022, 58(9): 1108-1117. [15] LI Shanshan, CHEN Yun, GONG Tongzhao, CHEN Xingqiu, FU Paixian, LI Dianzhong. Effect of Cooling Rate on the Precipitation Mechanism of Primary Carbide During Solidification in High Carbon-Chromium Bearing Steel[J]. 金属学报, 2022, 58(8): 1024-1034. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed