Acta Metall Sin  1990, Vol. 26 Issue (4): 45-49    DOI:

Current Issue | Archive | Adv Search |

BEHAVIOUR OF AUSTENITE UNDER IMPACT ABRASION

WANG Huaming;ZHANG Qing;SHAO Hesheng Institute of Metal Research; Academia Sinica; Shenyang Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing Beijing Graduate School; China University of Mining and Technology

WANG Huaming;ZHANG Qing;SHAO Hesheng Institute of Metal Research; Academia Sinica; Shenyang Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing Beijing Graduate School; China University of Mining and Technology. BEHAVIOUR OF AUSTENITE UNDER IMPACT ABRASION. Acta Metall Sin, 1990, 26(4): 45-49.

Abstract References Related Articles Recommended Metrics Download:  PDF(1165KB)  Export:  BibTeX | EndNote (RIS)       Abstract  On the basis of the experimental results of resistance to impact-abra-sion of a newly developed austenite-bainitic ferrite dual-phase high carbon lowalloy steel with high strength, toughness and strain-hardening ability, discussionwas made on the behaviour of austenite under impact abrasion. It was found thata favourable austenite resisting to impact abrasion is only more stable and fine onewith certain high dispersion in the matrix of high strength and proper toughnesssteel. But the mechanically poor stable and coarse austenite in quantity, especiallydistributed as continuous matrix, is extremly harmful to impact abrasion resistance. Key words:  impact abrasion      wear resistance      austenite      Received:  18 April 1990      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1990/V26/I4/45 1 Maratray F, Pculalion A. Trans, Am Foundrymen's Soc, 1982; 90: 795--804 2 Fiost R H, Majewski T, Krauss G. Trars Am Fourdiymen's, 1986; 94: 297--321 3 Fan X B, He L, Zhou Q D. In: Ludema K C ed, Proc 7th Int Conf on Wear Materials, New York: ASME, 1989: 57--61 4 胡斌,饶启昌,鲍永夫,吴建鹏.西安交通大学学报,1988;22(2) :55--66 5 王华明.中国矿业大学北京研究生部博士学位论文,1989 6 Bhadeshia H K D H, Edmonds D V. Met Sci, 1983; 17: 411-425 7 Sandvic B P J, Metal Trans, 1982; 13A 777--800 8 Matas S J, Hehemann R F. Trans AIME, 1961; 221: 179--185 [1] DING Hua, ZHANG Yu, CAI Minghui, TANG Zhengyou. Research Progress and Prospects of Austenite-Based Fe-Mn-Al-C Lightweight Steels[J]. 金属学报, 2023, 59(8): 1027-1041. [2] WANG Bin, NIU Mengchao, WANG Wei, JIANG Tao, LUAN Junhua, YANG Ke. Microstructure and Strength-Toughness of a Cu-Contained Maraging Stainless Steel[J]. 金属学报, 2023, 59(5): 636-646. [3] WANG Haifeng, ZHANG Zhiming, NIU Yunsong, YANG Yange, DONG Zhihong, ZHU Shenglong, YU Liangmin, WANG Fuhui. Effect of Pre-Oxidation on Microstructure and Wear Resistance of Titanium Alloy by Low Temperature Plasma Oxynitriding[J]. 金属学报, 2023, 59(10): 1355-1364. [4] HOU Xuru, ZHAO Lin, REN Shubin, PENG Yun, MA Chengyong, TIAN Zhiling. Effect of Heat Input on Microstructure and Mechanical Properties of Marine High Strength Steel Fabricated by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(10): 1311-1323. [5] SHEN Guohui, HU Bin, YANG Zhanbing, LUO Haiwen. Influence of Tempering Temperature on Mechanical Properties and Microstructures of High-Al-Contained Medium Mn Steel Having δ-Ferrite[J]. 金属学报, 2022, 58(2): 165-174. [6] LI Xueda, LI Chunyu, CAO Ning, LIN Xueqiang, SUN Jianbo. Crystallography of Reverted Austenite in the Intercritically Reheated Coarse-Grained Heat-Affected Zone of High Strength Pipeline Steel[J]. 金属学报, 2021, 57(8): 967-976. [7] JIANG Zhonghua, DU Junyi, WANG Pei, ZHENG Jianneng, LI Dianzhong, LI Yiyi. Mechanism of Improving the Impact Toughness of SA508-3 Steel Used for Nuclear Power by Pre-Transformation of M-A Islands[J]. 金属学报, 2021, 57(7): 891-902. [8] LIU Man, HU Haijiang, TIAN Junyu, XU Guang. Effect of Ausforming on the Microstructures and Mechanical Properties of an Ultra-High Strength Bainitic Steel[J]. 金属学报, 2021, 57(6): 749-756. [9] WANG Jinliang, WANG Chenchong, HUANG Minghao, HU Jun, XU Wei. The Effects and Mechanisms of Pre-Deformation with Low Strain on Temperature-Induced Martensitic Transformation[J]. 金属学报, 2021, 57(5): 575-585. [10] CHEN Wenxiong, HU Baojia, JIA Chunni, ZHENG Chengwu, LI Dianzhong. Post-Dynamic Softening of Austenite in a Ni-30%Fe Model Alloy After Hot Deformation[J]. 金属学报, 2020, 56(6): 874-884. [11] XU Wei,HUANG Minghao,WANG Jinliang,SHEN Chunguang,ZHANG Tianyu,WANG Chenchong. Review: Relations Between Metastable Austenite and Fatigue Behavior of Steels[J]. 金属学报, 2020, 56(4): 459-475. [12] WANG Cunyu,CHANG Ying,ZHOU Fengluan,CAO Wenquan,DONG Han,WENG Yuqing. M3 Microstructure Control Theory and Technology of the Third-Generation Automotive Steels with HighStrength and High Ductility[J]. 金属学报, 2020, 56(4): 400-410. [13] JIANG Yi,CHENG Manlang,JIANG Haihong,ZHOU Qinglong,JIANG Meixue,JIANG Laizhu,JIANG Yiming. Microstructure and Properties of 08Cr19Mn6Ni3Cu2N (QN1803) High Strength Nitrogen Alloyed LowNickel Austenitic Stainless Steel[J]. 金属学报, 2020, 56(4): 642-652. [14] LUO Haiwen,SHEN Guohui. Progress and Perspective of Ultra-High Strength Steels Having High Toughness[J]. 金属学报, 2020, 56(4): 494-512. [15] PENG Yun,SONG Liang,ZHAO Lin,MA Chengyong,ZHAO Haiyan,TIAN Zhiling. Research Status of Weldability of Advanced Steel[J]. 金属学报, 2020, 56(4): 601-618. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed