Please wait a minute...
金属学报  1998, Vol. 34 Issue (8): 858-863    
  论文 本期目录 | 过刊浏览 |
定向凝固镍基高温合金的高温蠕变
袁超;郭建亭;杨洪才;王淑荷
中国科学院金属研究所;沈阳;110015;东北大学材料与冶金学院;沈阳;110006;中国科学院金属研究所;沈阳;110015;东北大学材料与冶金学院;沈阳;110006;中国科学院金属研究所;沈阳;110015
HIGH TEMPERATURE CREEP OF A DIRECTIONALLY SOLIDIFIED Ni-BASE SUPERALLOY
YUAN Chao; GUO Jianting; YANG Hongcai; WANG Shuhe( Institute of Metal Research; The Chinese Academy of Sciences; Shenyang 110015 School of Materials Science and Metallurgy; Northeastern University; Shenyang 110006)Correspondent. Guo Jianting; professor Tel: 25843531-55493; Fax: (024)23891320;E-mail: jtguo .imr.ac.cn
引用本文:

袁超;郭建亭;杨洪才;王淑荷. 定向凝固镍基高温合金的高温蠕变[J]. 金属学报, 1998, 34(8): 858-863.
, , , . HIGH TEMPERATURE CREEP OF A DIRECTIONALLY SOLIDIFIED Ni-BASE SUPERALLOY[J]. Acta Metall Sin, 1998, 34(8): 858-863.

全文: PDF(1813 KB)  
摘要: 研究了一种定向凝固镍基高温合金在870℃,330—420MPa应力下的高温拉伸蠕变性能.结果表明:蠕变曲线表现了较短的减速蠕变阶段和较长的加速蠕变阶段,其蠕变变形机制为位错在第二相粒子间的Orowan弯曲过程,而不是由扩散过程所控制加速蠕变阶段蠕变速率的起始增加是显微组织发生变化(γ’相的定向粗化)的结果,而不是蠕变裂纹的形成与扩展.蠕变断裂数据符合MonkmanGrant关系.最终的断裂过程受控于蠕变裂纹的扩展速度
关键词 定向凝固镍基高温合金高温拉伸蠕变蠕变断裂    
Abstract:The tensile creep behaviors of DZ17G alloy, a directionally soliditied Ni-base superalloyl were investigated at 870 ℃ under the applied stress range of 330-420 MPa. All of the creep curves have similar shape: a short primary creep and dominant accelerated creep stages. The creep apparent parameters (the stress exponent and the apparent activation energy for creep) and TEM observations suggest that the Orowan bowing process of dislocations is the dominant creep deformation mechanism. The reason why creep rate ascends at the beginning of accelerated creep stage is not the nucleation and propagation of creep cracks, but the consequence of microstructure change (γ' particles oriented coarsening uncompletely). The creep fracture data follow the Monkman-Grant relationship, and the final fracture process is controlled by the propagation rate of creep cracks.
Key wordsdirectionally solidification    Ni-base superalloy    high temperature tensile creep    creep fracture
收稿日期: 1998-08-18     
1 Sims C T, Stoloff N S, Hagel W C. Superulloys II New York: John Wiley and Sous Inc, 1987: 123
2 Mackay R A, Maiey R D. Metall Trans, 1982; 13A: 1747
3 Nathal M V, Ebert L J. Metall Trans, 1985; 16A: 427
4 Pollock T M, Argon A S. Acta Metall Mater 1992; 40: 1
5 Rouault-Rogez H, Dupeux M, Ignat M. Acta Metall Mater 1994; 42: 3137
6 Dennison J P, Holmes P D, Wilshire B. Mater Sci Eng, 1978; 33: 35
7 Versnyder F L, Shank M E. Mater Sci Eny, 1970; 6: 213
8 Yuan C, Guo J T, Yang H C, Wang S H. J Mater Sci Tech, 1998; 14(3): 219
9 Mishra R S, Singh S P, Sriramawurthy A M, Pandey M C. Mater Sci Tech, 1995; 11: 341
10 Scarlin R B. Metall Trans, 1976; 7A: 1535
11 Mukherjee A K, Bird J E, Dorn J E. Trans ASM 1969; 62: 155
12 Guo Jianting, Ranucci D, Picco E, Strocchi P M. Metall Trans, 1983; 14A: 2329
13 Tien J K, Coply S M. Metall Trans, 1971; 2A: 215
14 Svetlov I L, Golvovko B A, Epishin A I, Abalakin N P. Scri Metall Maten 1992; 26: 1353
15 袁超,郭建亭,杨洪才,王淑荷,金属学报, 1998; 34(7): 689(Yuan C, Guo J T, Yang H C, Wang S H. Acta Metall Sin, 1998; 34(7): 689)
16 Monkman F C, Grant J. Proc ASTM 1956; 56: 593
17 Tien J K, Ansell G S. Resistence to Creep, Alloy and Microstructure Design, NewYork: Academic Press,1976: 167=
[1] 江河, 佴启亮, 徐超, 赵晓, 姚志浩, 董建新. 镍基高温合金疲劳裂纹急速扩展敏感温度及成因[J]. 金属学报, 2023, 59(9): 1190-1200.
[2] 马德新, 赵运兴, 徐维台, 王富. 重力对高温合金定向凝固组织的影响[J]. 金属学报, 2023, 59(9): 1279-1290.
[3] 郑亮, 张强, 李周, 张国庆. /降氧过程对高温合金粉末表面特性和合金性能的影响:粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278.
[4] 王磊, 刘梦雅, 刘杨, 宋秀, 孟凡强. 镍基高温合金表面冲击强化机制及应用研究进展[J]. 金属学报, 2023, 59(9): 1173-1189.
[5] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124.
[6] 穆亚航, 张雪, 陈梓名, 孙晓峰, 梁静静, 李金国, 周亦胄. 基于热力学计算与机器学习的增材制造镍基高温合金裂纹敏感性预测模型[J]. 金属学报, 2023, 59(8): 1075-1086.
[7] 袁江淮, 王振玉, 马冠水, 周广学, 程晓英, 汪爱英. Cr2AlC涂层相结构演变对力学性能的影响[J]. 金属学报, 2023, 59(7): 961-968.
[8] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[9] 刘来娣, 丁彪, 任维丽, 钟云波, 王晖, 王秋良. DZ445镍基高温合金高温长时间氧化形成的多层膜结构[J]. 金属学报, 2023, 59(3): 387-398.
[10] 苏震奇, 张丛江, 袁笑坦, 胡兴金, 芦可可, 任维丽, 丁彪, 郑天祥, 沈喆, 钟云波, 王晖, 王秋良. 纵向静磁场下单晶高温合金定向凝固籽晶回熔界面杂晶的形成与演化[J]. 金属学报, 2023, 59(12): 1568-1580.
[11] 于少霞, 王麒, 邓想涛, 王昭东. GH3600镍基高温合金极薄带的制备及尺寸效应[J]. 金属学报, 2023, 59(10): 1365-1375.
[12] 祝国梁, 孔德成, 周文哲, 贺戬, 董安平, 疏达, 孙宝德. 选区激光熔化 γ' 相强化镍基高温合金裂纹形成机理与抗裂纹设计研究进展[J]. 金属学报, 2023, 59(1): 16-30.
[13] 李彦强, 赵九洲, 江鸿翔, 何杰. Pb-Al合金定向凝固组织形成过程[J]. 金属学报, 2022, 58(8): 1072-1082.
[14] 陈瑞润, 陈德志, 王琪, 王墅, 周哲丞, 丁宏升, 傅恒志. Nb-Si基超高温合金及其定向凝固工艺的研究进展[J]. 金属学报, 2021, 57(9): 1141-1154.
[15] 朱玉平, 盛乃成, 谢君, 王振江, 荀淑玲, 于金江, 李金国, 杨林, 侯桂臣, 周亦胄, 孙晓峰. 高钨镍基高温合金K416BW相的析出行为[J]. 金属学报, 2021, 57(2): 215-223.