Please wait a minute...
金属学报  2004, Vol. 40 Issue (1): 8-13     
  论文 本期目录 | 过刊浏览 |
连续冷却过程中低碳钢奥氏体→铁素体相变的元胞自动机模拟
张 林;张彩碚;王元明
中国科学院金属研究所沈阳材料科学国家(联合)实验室
Cellular Automaton Modelling Of The Transformation From Austenite to Ferrite In Low Carbon Steels During Continuous Cooling
ZHANG Lin; ZHANG Caibei; WANG Yuanming;WANG Shaoqing
Shenyang National Laboratory for Materials Science;Institute of Metal Research; The Chinese Academic of Sciences
引用本文:

张林; 张彩碚; 王元明 . 连续冷却过程中低碳钢奥氏体→铁素体相变的元胞自动机模拟[J]. 金属学报, 2004, 40(1): 8-13 .
, , , . Cellular Automaton Modelling Of The Transformation From Austenite to Ferrite In Low Carbon Steels During Continuous Cooling[J]. Acta Metall Sin, 2004, 40(1): 8-13 .

全文: PDF(260 KB)  
摘要: 采用低碳钢连续冷却过程中奥氏体→ 铁素体相变的元胞自动机模型, 模拟了铁素 体晶粒形核与生长的全过程, 模型中考虑了 溶质扩散在相变过程中的作用.在元胞自动机的网格 内, 晶粒的形核与生长用两个概率的变化来描述它们 之间在相变过程中的相互竞争关系, 给出了 形核与生长的元胞自动机规则.总结了元胞自动机 方法解决铁素体晶粒形核与生长问题的过程, 并在该模型的基础上分析了冷却速率等因素对于晶粒形核与生长的影响.
关键词 相变计算机模拟低碳钢    
Abstract:A two--dimensional cellular automaton model is developed to simulate the transformation from austenite to ferrite in low carbon steels during continuous cooling.The model, with a local rule--based scheme involving nucleation and growth of ferrite,incorporates the change of the solute field into a nucleation or growth function whichis utilized by the automaton in a probabilistic fashion. The competition betweennucleation and growth of ferrite is described by the changes of a nucleationprobability and a growth probability in this cellular automaton lattice. The procedureof this cellular automaton modelling is generalized, and the effect of coolingconditions on this transformation is also discussed.
Key wordsphase transformation    computer simulation    low carbon steel
收稿日期: 2003-03-04     
ZTFLH:  TG111.5  
[1] Wolfram S. Rev Modell Phys, 1983; 55:601
[2] Lepinoux J, Kubin L P. Scr Metall, 1987; 21:833
[3] Rappaz M, Gandin C A. Acta Metall.Mater, 1993; 41; 345
[4] Goetz R L, Seetharman V. Metall Mater Trans, 1998; 22A: 2307
[5] Zhang L, Wang Y M, Zhang C B. Acta Metall Sin, 2001; 37:882(张林,王元明,张彩碚.金属学报,2001;37:882)
[6] Zhang L, Zhang C B, Liu X H, Wang G D, Wang Y M. J Mater Sci Technol, 2002; 18:163
[7] Umemoto M, Ohtsuka H, Tamura I. J Mater Sci Technol, 1987; 3:249
[8] Hawbolt E B, Chau B, Brimacombe J K. Metall Trans,1983; 14A: 1803
[9] Enomoto M, Aaronson H I. Metall Trans, 1986; 17A: 1381
[10] Militzer M, Pandi R, Hawbolt E B. Metall Mater Trans, 1996; 27A: 1547
[11] Jacot A, Rappaz M. Acta Mater, 1997; 45:575
[12] Zhang L, Zhang C B, Wang Y M, Liu X H, Wang G D. Mater Res, 2002; 17:2251
[13] Zhang L, Wang Y M, Zhang C B, Wang S Q, Ye H Q. Modelling Simu Mater Sci Technol, 2003; 11:791
[14] Zhang L, Zhang C B, Wang Y M, Wang S Q, Ye H Q. Acta Mater, 2003; 51:55193
[1] 白佳铭, 刘建涛, 贾建, 张义文. WTa型粉末高温合金的蠕变性能及溶质原子偏聚[J]. 金属学报, 2023, 59(9): 1230-1242.
[2] 李小涵, 曹公望, 郭明晓, 彭云超, 马凯军, 王振尧. 低碳钢Q235、管线钢L415和压力容器钢16MnNi在湛江高湿高辐照海洋工业大气环境下的初期腐蚀行为[J]. 金属学报, 2023, 59(7): 884-892.
[3] 冯艾寒, 陈强, 王剑, 王皞, 曲寿江, 陈道伦. 低密度Ti2AlNb基合金热轧板微观组织的热稳定性[J]. 金属学报, 2023, 59(6): 777-786.
[4] 王重阳, 韩世伟, 谢峰, 胡龙, 邓德安. 固态相变和软化效应对超高强钢焊接残余应力的影响[J]. 金属学报, 2023, 59(12): 1613-1623.
[5] 张开元, 董文超, 赵栋, 李世键, 陆善平. 固态相变对Fe-Co-Ni超高强度钢长臂梁构件焊接-淬火过程应力和变形的影响[J]. 金属学报, 2023, 59(12): 1633-1643.
[6] 姜江, 郝世杰, 姜大强, 郭方敏, 任洋, 崔立山. NiTi-Nb原位复合材料的准线性超弹性变形[J]. 金属学报, 2023, 59(11): 1419-1427.
[7] 李小兵, 潜坤, 舒磊, 张孟殊, 张金虎, 陈波, 刘奎. W含量对Ti-42Al-5Mn-xW合金相转变行为的影响[J]. 金属学报, 2023, 59(10): 1401-1410.
[8] 李赛, 杨泽南, 张弛, 杨志刚. 珠光体-奥氏体相变中扩散通道的相场法研究[J]. 金属学报, 2023, 59(10): 1376-1388.
[9] 彭治强, 柳前, 郭东伟, 曾子航, 曹江海, 侯自兵. 基于大数据挖掘的连铸结晶器传热独立变化规律[J]. 金属学报, 2023, 59(10): 1389-1400.
[10] 孙毅, 郑沁园, 胡宝佳, 王平, 郑成武, 李殿中. 3Mn-0.2C中锰钢形变诱导铁素体动态相变机理[J]. 金属学报, 2022, 58(5): 649-659.
[11] 李伟, 贾兴祺, 金学军. 高强韧QPT工艺的先进钢组织调控和强韧化研究进展[J]. 金属学报, 2022, 58(4): 444-456.
[12] 原家华, 张秋红, 王金亮, 王灵禺, 王晨充, 徐伟. 磁场与晶粒尺寸协同作用对马氏体形核及变体选择的影响[J]. 金属学报, 2022, 58(12): 1570-1580.
[13] 杨平, 王金华, 马丹丹, 庞树芳, 崔凤娥. 成分对真空脱锰法相变控制高硅电工钢{100}织构的影响[J]. 金属学报, 2022, 58(10): 1261-1270.
[14] 胡标, 张华清, 张金, 杨明军, 杜勇, 赵冬冬. 界面热力学与晶界相图的研究进展[J]. 金属学报, 2021, 57(9): 1199-1214.
[15] 李学达, 李春雨, 曹宁, 林学强, 孙建波. 高强管线钢焊接临界再热粗晶区中逆转奥氏体的逆相变晶体学[J]. 金属学报, 2021, 57(8): 967-976.