Please wait a minute...
金属学报  2011, Vol. 47 Issue (7): 893-898    DOI: 10.3724/SP.J.1037.2011.00276
  论文 本期目录 | 过刊浏览 |
Zr-2.5Nb合金中β-Nb相的氧化过程
李强, 梁雪, 彭剑超, 刘仁多, 余康, 周邦新
上海大学微结构重点实验室, 上海 200444
OXIDATION BEHAVIOR OF THE β-Nb PHASE PRECIPITATED IN Zr-2.5Nb ALLOY
LI Qiang, LIANG Xue, PENG Jianchao, LIU Renduo, YU Kang, ZHOU Bangxin
Laboratory for Microstructures, Shanghai University, Shanghai 200444
引用本文:

李强 梁雪 彭剑超 刘仁多 余康 周邦新. Zr-2.5Nb合金中β-Nb相的氧化过程[J]. 金属学报, 2011, 47(7): 893-898.
, , , , , . OXIDATION BEHAVIOR OF THE β-Nb PHASE PRECIPITATED IN Zr-2.5Nb ALLOY[J]. Acta Metall Sin, 2011, 47(7): 893-898.

全文: PDF(1301 KB)  
摘要: Zr-2.5Nb合金经β相水淬、冷轧变形及580 ℃, 50 h退火处理, 在静态高压釜中进行500 ℃/10.3 MPa 的过热蒸汽腐蚀实验. HRTEM观测表明, 580 ℃, 50 h退火处理的锆合金析出了颗粒细小(<100 nm)的β-Nb第二相, 其数量较多, 分布较均匀. β-Nb相的氧化速率比锆合金基体缓慢, 在氧化过程中首先生成NbO2, 呈现晶态和非晶态的混合组织, 然后转变成非晶态占主导的氧化物, 最后流失到腐蚀介质中.
关键词 Zr-2.5Nb合金热处理β-Nb相晶体结构    
Abstract:The corrosion behavior for Zr--2.5Nb specimens heat--treated at 580 ℃ for 50 h after $\beta$--quenching
and cold rolling has been investigated in 500 ℃/10.3 MPa superheated steam by autoclave tests. HRTEM
equipped with EDS was employed to investigate the matrix microstructure and the oxidation behavior of the
$\beta$--Nb second phase particles (SPPs). It was found that many $\beta$--Nb SPPs with small sizes ($<$100 nm)
randomly precipitated after heat treating at 580 ℃ for 50 h. It was noted that the $\beta$--Nb SPPs were more
slowly oxidized than the zirconium matrix. The $\beta$--Nb SPPs of bcc structure were oxidized to form the mixed
structure of amorphous oxide and crystalline NbO$_{2}$ at the initial oxidation stage, and then the amorphous phase was changed to the
main structure at the middle oxidation stage, finally the niobium oxides were dissolved into the corrosion medium.
Key wordsZr-2.5Nb alloys    heat treatment    β-Nb phase    crystal structure
收稿日期: 2011-04-29     
基金资助:

国家自然科学基金项目50871064和50971084, 国家高技术研究发展计划项目2008AA031701, 上海市自然科学基金项目09ZR1411700及上海市重点学科建设项目S30107资助

作者简介: 李强, 男, 1967年生, 副研究员
[1] Ells C E, Evans W. Can Min Metall Bull, 1981; 74: 105

[2] Yang W D. Reactor Materials Science. Beijing: Atomic Energy Press, 2006: 19

(杨文斗. 反应堆材料学. 北京: 原子能出版社, 2006: 19)

[3] Comstock R J, Schoenberger G, Sable G P. In: Bradley E R, Sabol G P, eds., Zirconium in the Nuclear Industry. Philadelphia: American Society for Testing and Materials, 1996: 710

[4] Ramasubramanian N, Balakrishnan P V. In: Garde A M, Bradley E R, eds., Zirconium in the Nuclear Industry: Tenth International Symposium, ASTM STP 1245, Philadelphia: American Society for Testing and Materials, 1994: 378

[5] Anada H, Takeda K. In: Bradley E R, Sabol G P, eds., Zirconium in the Nuclear Industry: Eleventh International Symposium, ASTM STP 1295, Philadelphia: American Society for Testing and Materials, 1996: 35

[6] Perkins R A, Busch R A. In: Eucken C M, Garde A M, eds., Zirconium in the Nuclear Industry: Ninth International Symposium, ASTM STP 1132, Philadelphia: American Society for Testing and Materials, 1991: 595

[7] Shebaldov P V, Peregud M M, Nikulina A V, Bibilashvili Y K, Lositski A F, Kuz’menko N V, Belov V I, Novoselov A E. In: Sabol G P, Moan G D, eds., Zirconium in the Nuclear

Industry: Twelfth International Symposium, ASTM STP 1354, West Conshohocken, PA: American Society for Testing and Materials, 2000: 545

[8] Kim H G, Jeong Y H, Kim T H. J Nucl Mater, 2004; 326: 125

[9] Jeong Y H, Lee K O, Kim H G. J Nucl Mater, 2002; 302: 9

[10] Koutsky J, Kocik J. Radiation Damage of Structural Materials. Amsterdam: Materials Science Monographys, 1994: 315

[11] Jeong Y H, Kim H G, Kim T H. J Nucl Mater, 2003; 317: 1

[12] Nikulina A V, Markelov V A, Peregud M M, Bibilashvili Y K, Kotrekhov V A, Lositsky A F, Kuzmenko N V, Shevnin Y P, Shamardin V K, Kobylyansky G P, Novoselov A E. In: Bradley E R, Sabol G P, eds., Zirconium in the Nuclear Industry: Eleventh International Symposium, ASTM STP 1295, Philadelphia: American Society for Testing and Materials, 1996: 785

[13] Kim H G, Choi B K, Park J Y, Cho H D, Jeong Y H. J Alloys Compd, 2009; 481: 867

[14] Liu W Q, Zhou B X, Li Q. Nucl Power Eng, 2002; 23: 69

(刘文庆, 周邦新, 李强. 核动力工程, 2002; 23: 69)

[15] Li Q. PhD Thesis, Shanghai University, 2008

(李强. 上海大学博士论文, 2008)

[16] Li Q, Liu W Q, Zhou B X. Rare Met Mater Eng, 2002; 31: 389

(李强, 刘文庆, 周邦新. 稀有金属材料与工程, 2002; 31: 389)
[1] 王法, 江河, 董建新. 高合金化GH4151合金复杂析出相演变行为[J]. 金属学报, 2023, 59(6): 787-796.
[2] 张东阳, 张钧, 李述军, 任德春, 马英杰, 杨锐. 热处理对选区激光熔化Ti55531合金多孔材料力学性能的影响[J]. 金属学报, 2023, 59(5): 647-656.
[3] 杨累, 赵帆, 姜磊, 谢建新. 机器学习辅助2000 MPa级弹簧钢成分和热处理工艺开发[J]. 金属学报, 2023, 59(11): 1499-1512.
[4] 孙腾腾, 王洪泽, 吴一, 汪明亮, 王浩伟. 原位自生2%TiB2 颗粒对2024Al增材制造合金组织和力学性能的影响[J]. 金属学报, 2023, 59(1): 169-179.
[5] 韩林至, 牟娟, 周永康, 朱正旺, 张海峰. 热处理温度对Ti0.5Zr1.5NbTa0.5Sn0.2 高熵合金组织结构与力学性能的影响[J]. 金属学报, 2022, 58(9): 1159-1168.
[6] 李钊, 江河, 王涛, 付书红, 张勇. GH2909低膨胀高温合金热处理中的组织演变行为[J]. 金属学报, 2022, 58(9): 1179-1188.
[7] 张家榕, 李艳芬, 王光全, 包飞洋, 芮祥, 石全强, 严伟, 单以银, 杨柯. 热处理对一种双峰晶粒结构超低碳9Cr-ODS钢显微组织与力学性能的影响[J]. 金属学报, 2022, 58(5): 623-636.
[8] 曾小勤, 王杰, 应韬, 丁文江. 镁及其合金导热研究进展[J]. 金属学报, 2022, 58(4): 400-411.
[9] 袁波, 郭明星, 韩少杰, 张济山, 庄林忠. 添加3%ZnAl-Mg-Si-Cu合金非等温时效析出行为的影响[J]. 金属学报, 2022, 58(3): 345-354.
[10] 陈润, 王帅, 安琦, 张芮, 刘文齐, 黄陆军, 耿林. 热挤压与热处理对网状TiBw/TC18复合材料组织及性能的影响[J]. 金属学报, 2022, 58(11): 1478-1488.
[11] 王迪, 黄锦辉, 谭超林, 杨永强. 激光增材制造过程中循环热输入对组织和性能的影响[J]. 金属学报, 2022, 58(10): 1221-1235.
[12] 王文权, 王苏煜, 陈飞, 张新戈, 徐宇欣. 选区激光熔化成形TiN/Inconel 718复合材料的组织和力学性能[J]. 金属学报, 2021, 57(8): 1017-1026.
[13] 王悦, 王继杰, 张昊, 赵泓博, 倪丁瑞, 肖伯律, 马宗义. 热处理对激光选区熔化AlSi10Mg合金显微组织及力学性能的影响[J]. 金属学报, 2021, 57(5): 613-622.
[14] 马德新, 赵运兴, 徐维台, 皮立波, 李重行. 高温合金单晶铸件中共晶组织分布的表面效应[J]. 金属学报, 2021, 57(12): 1539-1548.
[15] 张少华, 谢光, 董加胜, 楼琅洪. 单晶高温合金共晶溶解行为的差热分析[J]. 金属学报, 2021, 57(12): 1559-1566.