Please wait a minute...
金属学报  2014, Vol. 50 Issue (4): 463-470    DOI: 10.3724/SP.J.1037.2013.00404
  本期目录 | 过刊浏览 |
激光立体成形GH4169合金再结晶过程中的界面和晶体取向演化*
刘奋成1(), 林鑫2, 余小斌1, 黄春平1, 黄卫东2
1 南昌航空大学轻合金加工科学与技术国防重点学科实验室, 南昌 330063
2 西北工业大学凝固技术国家重点实验室, 西安 710072
EVOLUTION OF INTERFACE AND CRYSTAL ORIENTATION OF LASER SOLID FORMED GH4169 SUPERALLOY DURING RECRYSTALLIZATION
LIU Fencheng1(), LIN Xin2, YU Xiaobin1, HUANG Chunping1, HUANG Weidong2
1 National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang 330063
2 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072
引用本文:

刘奋成, 林鑫, 余小斌, 黄春平, 黄卫东. 激光立体成形GH4169合金再结晶过程中的界面和晶体取向演化*[J]. 金属学报, 2014, 50(4): 463-470.
Fencheng LIU, Xin LIN, Xiaobin YU, Chunping HUANG, Weidong HUANG. EVOLUTION OF INTERFACE AND CRYSTAL ORIENTATION OF LASER SOLID FORMED GH4169 SUPERALLOY DURING RECRYSTALLIZATION[J]. Acta Metall Sin, 2014, 50(4): 463-470.

全文: PDF(4059 KB)   HTML
摘要: 

利用电子背散射衍射技术, 对激光立体成形GH4169镍基高温合金沉积态试样以及1100 ℃保温5和30 min水淬后试样的显微组织、晶界特点和晶体取向等进行了分析. 结果表明, 再结晶过程中随晶粒尺寸得到细化的同时, 各晶粒的晶体取向逐渐变得随机, 消除了沉积态材料中原本存在的各向异性, 合金的界面特点也发生变化, 大角度晶界数量逐渐增多, 且再结晶后期<111>60°孪晶界大量出现, 占总界面体积分数的44%, 孪晶的形成对激光立体成形GH4169合金的晶粒细化起了很重要的作用; 再结晶形核机制在再结晶初期以原始晶界的亚晶形核和晶界弓出机制为主, 孪晶相关的晶粒细化机制是再结晶后期晶粒细化的重要机制.

关键词 激光立体成形GH4169合金再结晶界面晶体取向    
Abstract

The dynamic-load mechanical of laser solid forming (LSF) GH4l69 Ni-based superalloy is influenced by the coarse columnar grains formed in LSF processing and then its application in jet engines like turbine disks is limited. The previous study showed that the grain structure of the LSF GH4l69 superalloy can be refined by recrystallization processing during post heat treatment. In this work, the microstructure, interface and crystal orientation of the as-deposited and heat treated LSF GH4169 superalloy samples were investigated by EBSD analysis. It was found that the crystal orientations of grains become more randomly organized as the grain structure of the LSF GH4169 superalloy was refined by heat treatment and the holding time of heat treatment was increased. Subsequently, microstructural anisotropy existed in the as-deposited samples was disappeared in the heat treated samples and the fraction of high angle grain boundary was increased greatly. < 111> 60° twin crystal boundary was presented during the later period of recrystallization and the volume fraction of the twin crystal boundary reached up to 44%. This indicated that the formation of twin crystal boundary during static recrystallization of LSF GH4169 samples played an important role in the refinement of grain structure. Sub-grain and grain-boundary migration nucleation were the main nucleation mechanisms at the beginning of the recrystallization and nucleation related to twin was one of the most important mechanisms in the later period of the recrystallization.

Key wordslaser solid forming    GH4169 superalloy    recrystallization    interface    crystal orientation
收稿日期: 2013-07-11     
ZTFLH:  TG146.4  
基金资助:*国家自然科学基金项目51201087和51165038, 江西省自然科学基金项目20132BAB216013, 西北工业大学凝固技术国家重点实验室开放基金项目SKLSP201306和SKLSP201225, 江西省教育厅科学技术研究项目GJJ13493, 南昌航空大学科研启动基金项目EA201203072资助
作者简介: null

刘奋成, 男, 1981年生, 博士

Material Cr Fe Ti Al Mo Nb C Ni
Powder 19.7 18.4 1.0 0.6 3.0 5.2 0.03 Bal.
LSF sample 19.6 18.2 1.1 0.5 3.3 5.6 0.05 Bal.
AMS: 5663 17~21 16~20 0.65~1.15 0.2~0.8 2.8~3.3 4.75~5.5 0.08 (Max.) Bal.
  
图1  
图 2  
图 3  
图4  
图5  
图6  
图7  
[1] Huang W D,Lin X,Chen J,Liu Z X,Li Y M. Laser Solid Forming. Xi'an: Northwestern Polytechnical University Press, 2007: 10
[1] (黄卫东,林 鑫,陈 静,刘振侠,李延民. 激光立体成形. 西安: 西北工业大学出版社, 2007: 10)
[2] Lin X, Yang H O, Chen J, Huang W D. Acta Metall Sin, 2006; 42: 361
[2] (林 鑫, 杨海鸥, 陈 静, 黄卫东. 金属学报, 2006; 42: 361)
[3] Gaumann M, Bezencon C, Canalis P, Kurz W. Acta Mater, 2001; 49: 1051
[4] Feng L P, Huang W D, Lin X, Yang H O. Chin J Nonferrous Met, 2003; 13: 181
[4] (冯莉萍, 黄卫东, 林 鑫, 杨海鸥. 中国有色金属学报, 2003; 13: 181)
[5] Feng L P, Huang W D, Li Y M, Yang H O, Lin X. Acta Metall Sin, 2002; 38: 502
[5] (冯莉萍, 黄卫东, 李延民, 杨海鸥, 林 鑫. 金属学报, 2002; 38: 502)
[6] Kobayashi K, Yamaguchi M, Hayakawa M, Kimura M. Acta Metall Sin (Eng Lett), 2004; 17: 345
[7] Merrick H F. Metall Mater Trans, 1974; 5B: 891
[8] Thompson A W, Bucci R J. Metall Mater Trans, 1973; 4B: 1173
[9] Yamaguchi K, Kanazawa K. Metall Mater Trans, 1980; 11A: 1691
[10] Andersson J. Int J Fatigue, 2005; 27: 847.
[11] Liu F C, Lin X, Yang G L, Huang C P, Chen J, Huang W D. Acta Metall Sin, 2010; 46: 1047
[11] (刘奋成, 林 鑫, 杨高林, 黄春平, 陈 静, 黄卫东. 金属学报, 2010; 46: 1047)
[12] Liu F C, Lin X, Yang G L, Song M H, Chen J, Huang W D. Rare Met, 2011; 30(Spec): 437
[13] Kaibyshev R, Gajnutdinova N, Valitov V. In: Gottstein G, Molodov D A eds., Proc 1st Joint Int Conf on Recrystallization and Grain Growth. New York: Springer, 2001: 949
[14] Belyakov A, Miura H, Sakai T. Mater Sci Eng, 1998; A255: 139
[15] Humphreys F J,Hatherly M. Recrystallization and Related Annealing Phenomena. Oxford: Pergamon Press, 2004: 427
[16] Wang Y. PhD Dissertation, Harbin Institute of Technology, 2008
[16] (王 岩. 哈尔滨工业大学博士学位论文, 2008)
[17] Mahajan S, Pande C S, Imam M A, Rath B B. Acta Mater, 1997; 45: 2633
[1] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[2] 杜金辉, 毕中南, 曲敬龙. 三联冶炼GH4169合金研究进展[J]. 金属学报, 2023, 59(9): 1159-1172.
[3] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229.
[4] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096.
[5] 常松涛, 张芳, 沙玉辉, 左良. 偏析干预下体心立方金属再结晶织构竞争[J]. 金属学报, 2023, 59(8): 1065-1074.
[6] 李福林, 付锐, 白云瑞, 孟令超, 谭海兵, 钟燕, 田伟, 杜金辉, 田志凌. 初始晶粒尺寸和强化相对GH4096高温合金热变形行为和再结晶的影响[J]. 金属学报, 2023, 59(7): 855-870.
[7] 王宗谱, 王卫国, Rohrer Gregory S, 陈松, 洪丽华, 林燕, 冯小铮, 任帅, 周邦新. 不同温度轧制Al-Zn-Mg-Cu合金再结晶后的{111}/{111}近奇异晶界[J]. 金属学报, 2023, 59(7): 947-960.
[8] 王福容, 张永梅, 柏国宁, 郭庆伟, 赵宇宏. Al掺杂Mg/Mg2Sn合金界面的第一性原理计算[J]. 金属学报, 2023, 59(6): 812-820.
[9] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[10] 夏大海, 计元元, 毛英畅, 邓成满, 祝钰, 胡文彬. 2024铝合金在模拟动态海水/大气界面环境中的局部腐蚀机制[J]. 金属学报, 2023, 59(2): 297-308.
[11] 娄峰, 刘轲, 刘金学, 董含武, 李淑波, 杜文博. 轧制态Mg-xZn-0.5Er合金板材组织及室温成形性能[J]. 金属学报, 2023, 59(11): 1439-1447.
[12] 周小宾, 赵占山, 汪万行, 徐建国, 岳强. 渣-金界面气泡夹带行为数值物理模拟[J]. 金属学报, 2023, 59(11): 1523-1532.
[13] 张伟东, 崔宇, 刘莉, 王文泉, 刘叡, 李蕊, 王福会. 600℃ NaCl盐雾环境下GH4169合金的腐蚀行为[J]. 金属学报, 2023, 59(11): 1475-1486.
[14] 沈莹莹, 张国兴, 贾清, 王玉敏, 崔玉友, 杨锐. SiCf/TiAl复合材料界面反应及热稳定性[J]. 金属学报, 2022, 58(9): 1150-1158.
[15] 宋庆忠, 潜坤, 舒磊, 陈波, 马颖澈, 刘奎. 镍基高温合金K417G与氧化物耐火材料的界面反应[J]. 金属学报, 2022, 58(7): 868-882.