Please wait a minute...
金属学报  1990, Vol. 26 Issue (6): 10-14    
  论文 本期目录 | 过刊浏览 |
奥氏体形变对先共析铁素体等温形成孕育期的影响
李箭;孙福玉
冶金工业部钢铁研究总院四室;工程师;冶金工业部钢铁研究总院
EFFECT OF AUSTENITE DEFORMATION ON ISOTHERMAL NUCLEATION INCUBATION TIME OF PRO-EUTECTOID FERRITE
LI Jian;SUN Fuyu Central Iron and Steel Research Institute; Ministry of Metallurgical Industry; Beijing
引用本文:

李箭;孙福玉. 奥氏体形变对先共析铁素体等温形成孕育期的影响[J]. 金属学报, 1990, 26(6): 10-14.
, . EFFECT OF AUSTENITE DEFORMATION ON ISOTHERMAL NUCLEATION INCUBATION TIME OF PRO-EUTECTOID FERRITE[J]. Acta Metall Sin, 1990, 26(6): 10-14.

全文: PDF(413 KB)  
摘要: 将Feder相变孕育期表达式引入形变奥氏体的分解中,建立了奥氏体形变条件下先共析铁素体等温形成孕育期的计算方法,计算了奥氏体形变储能和奥氏体晶界能量变化对相变孕育期的影响,计算结果与实验所得规律一致。
关键词 形变奥氏体铁素体相变孕育期    
Abstract:A calculation method for the isothermal nucleation incubation timeof pre-eutectoid ferrite from deformed austenite has been developed by introducingFeder's incubation time expression into the decomposition of dsformed austenite.The effects of austenite deformation stored enerey and austenite grain boundary en-ergy change on the incubation time have been theoretically calculated. The calcula-ted result seems to be consistent with a rule of experimental data that the austenitedeformation stored energy and the change of austenite grain boundary energy arethe nature of austenite deformation affecting upon the ferrite nucleation.
Key wordsdeformed austenite    ferrite    incubation time
收稿日期: 1990-06-18     
1 Cuddy L J. Metall Trans, 1981; 12A: 1313
2 Roberts W, Lidefelt H, Sandberg A. In: Sellars C M, Davies G J eds., Hot Working and Forming Processes, London: The Metals Society, 1980: 38
3 Sandberg A, Roberts W. In: DeArdo A J, Ratz G A, Wary P J eds., Thermomechanical Processing of Microalloyed Austenite, TMS-AIME, 1982: 405
4 Amin R K, Pickering F B. In: DeArdo A J, Ratz G A, Wary P J eds., Thermomechanical Processing of Microalloyed Austenite, TMS-AIME, 1982: 377
5 Ouchi C, Sampei T, Kozasu I.Trans Iron Steel Inst Jpn, 1982; 22: 214
6 Feder J, Russell K C, Lothe J, Pound G M. Adv Phys, 1966; 15: 111
7 Aaronson H I, Lee J K. In: Aaronson H I ed, Lectures on the theory of Phase Transformations, New York: TMS-AIME, 1975: 83
8 Gauties E, Simon A. In: Proc Int Conf on Phase Transformation, Abstract, Cambridge, 1987
9 徐祖耀.见:徐祖耀,李鹏兴主编,材料科学导论.上海科学技术出版社,1986:274
10 Kaufman L, Radcliffe S V, Cohen M. In: Zackay V F, Aaronson H I eds., Decomposition of Austenite by Diffusional Processes, London: Interscience, 1962; 313
11 Suzuki S, Weatherly G C, Houghton D C. Acta Metall, 1987; 35: 341
12 Wells C, Mehl R F. Trans AIME, 1941; 145: 315
13 Enomoto M, Aaronson H I. Metall Trans, 1986; 17A: 1385
14 Lange W F III, Enomoto M, Aaronson H I. Metall Trans, 1988; 19A: 427
15 李箭.冶金工业部钢铁研究总院博士学位论文,198
[1] 赵亚峰, 刘苏杰, 陈云, 马会, 马广财, 郭翼. 铁素体-贝氏体双相钢韧性断裂过程中的夹杂物临界尺寸及孔洞生长[J]. 金属学报, 2023, 59(5): 611-622.
[2] 吴欣强, 戎利建, 谭季波, 陈胜虎, 胡小锋, 张洋鹏, 张兹瑜. Pb-Bi腐蚀Si增强型铁素体/马氏体钢和奥氏体不锈钢的研究进展[J]. 金属学报, 2023, 59(4): 502-512.
[3] 程远遥, 赵刚, 许德明, 毛新平, 李光强. 奥氏体化温度对Si-Mn钢热轧板淬火-配分处理后显微组织和力学性能的影响[J]. 金属学报, 2023, 59(3): 413-423.
[4] 侯旭儒, 赵琳, 任淑彬, 彭云, 马成勇, 田志凌. 热输入对电弧增材制造船用高强钢组织与力学性能的影响[J]. 金属学报, 2023, 59(10): 1311-1323.
[5] 孙毅, 郑沁园, 胡宝佳, 王平, 郑成武, 李殿中. 3Mn-0.2C中锰钢形变诱导铁素体动态相变机理[J]. 金属学报, 2022, 58(5): 649-659.
[6] 化雨, 陈建国, 余黎明, 司永宏, 刘晨曦, 李会军, 刘永长. Cr铁素体耐热钢与奥氏体耐热钢的异种材料扩散连接接头组织演变及力学性能[J]. 金属学报, 2022, 58(2): 141-154.
[7] 彭俊, 金鑫焱, 钟勇, 王利. 基板表层组织对Fe-16Mn-0.7C-1.5Al TWIP钢可镀性的影响[J]. 金属学报, 2022, 58(12): 1600-1610.
[8] 陈胜虎, 戎利建. 超细晶铁素体-马氏体钢的高温氧化成膜特性及其对Pb-Bi腐蚀行为的影响[J]. 金属学报, 2021, 57(8): 989-999.
[9] 刘晨曦, 毛春亮, 崔雷, 周晓胜, 余黎明, 刘永长. 低活化铁素体/马氏体钢组织调控及其固相连接研究进展[J]. 金属学报, 2021, 57(11): 1521-1538.
[10] 赵嫚嫚, 秦森, 冯捷, 代永娟, 国栋. AlNi1Cr9Al(1~3)Ni(1~7)WVNbB钢热变形行为的影响[J]. 金属学报, 2020, 56(7): 960-968.
[11] 陈兴品,李文佳,任平,曹文全,刘庆. C含量对Fe-Mn-Al-C低密度钢组织和性能的影响[J]. 金属学报, 2019, 55(8): 951-957.
[12] 刘后龙,马明玉,刘玲玲,魏亮亮,陈礼清. 热轧板退火工艺对19Cr2Mo1W铁素体不锈钢织构与成形性能的影响[J]. 金属学报, 2019, 55(5): 566-574.
[13] 邵毅, 李彦默, 刘晨曦, 严泽生, 刘永长. 低碳铁素体不锈钢高频直缝电阻焊管退火工艺优化[J]. 金属学报, 2019, 55(11): 1367-1378.
[14] 陈浩, 张璁雨, 朱加宁, 杨泽南, 丁然, 张弛, 杨志刚. 奥氏体/铁素体界面迁移与元素配分的研究进展[J]. 金属学报, 2018, 54(2): 217-227.
[15] 张可, 李昭东, 隋凤利, 朱正海, 章小峰, 孙新军, 黄贞益, 雍岐龙. 冷却速率对Ti-V-Mo复合微合金钢组织转变及力学性能的影响[J]. 金属学报, 2018, 54(1): 31-38.