Please wait a minute...
金属学报  1989, Vol. 25 Issue (3): 23-28    
  论文 本期目录 | 过刊浏览 |
Cu-Zn-Al形状记忆合金在马氏体状态的塑性变形
张一;E.HORNBOGEN
上海钢铁研究所;InstituteforMaterials;Ruhr-University;Bochum;F.R.G.
DEFORMATION OF CuZnAl SHAPE MEMORY ALLOYS IN MARTENSITIC STATE
ZHANG Yi;E. HORNBOGEN Shanghai Institute of Iron and Steel Research Institute for Materials; Ruhr-University Bochum; F. R. G.
引用本文:

张一;E.HORNBOGEN. Cu-Zn-Al形状记忆合金在马氏体状态的塑性变形[J]. 金属学报, 1989, 25(3): 23-28.
, . DEFORMATION OF CuZnAl SHAPE MEMORY ALLOYS IN MARTENSITIC STATE[J]. Acta Metall Sin, 1989, 25(3): 23-28.

全文: PDF(1398 KB)  
摘要: 采用光学显微镜、电子显微镜、电阻和膨胀方法研究了三种Cu-Zn-Al形状记忆合金在马氏体状态的塑性变形对马氏体转变温度、相变过程及转变循环滞后的影响。其中两种合金相变温度较高,在室温下即为马氏体状态。第三种合金A_f温度远低于室温。讨论了“第一次循环效应”的可能机制。
关键词 形状记忆合金变形马氏体相变    
Abstract:Plastic deformation of three CuZnAl shape memory alloys in martensi-tic state was investigated by means of optical and electron metallography, dilatome-try and electric resistivity determination. Two of the alloys are in martensitic stateat ambient temperature, and the A_f temperature of the third one is far below theambient temperature. The effect of deformation of alloys in martensitic state onthe course and temperature of transformation as well as the hysteresis of transfor-mation cycles has been analyzed and the "effect of the first cycle" has also beendiscussed.
Key wordsshape memory alloy    deformation    martensitic transformation
收稿日期: 1989-03-18     
1 Zhang Yi (张一), Hornbogen E. Z Metallk. 1987; 78: 777
2 Zhang Yi (张一), Hornbogen E. Z Metallk. 1987; 78: 401
3 Saburi T, Wayman C M. Acta Meteall, 1979; 27: 979
4 Otsuka K, Shimizu K. Int Metall Rev, 1986; 31: 93
5 Adachi K, Perkins J. Metall Trans, 1986; 17A: 945
6 Olson G B, Cohen M. In: Nabarro F R N ed., Dislocation in solids, Amsterdam: Elsevier science, 1986: 295--407
7 De Graef M, Van Humbeck J, Delaey L. Proc Int Conf Martensitic Transformation, The Jpn Inst Metals, 1986: 850D
[1] 张雷雷, 陈晶阳, 汤鑫, 肖程波, 张明军, 杨卿. K439B铸造高温合金800℃长期时效组织与性能演变[J]. 金属学报, 2023, 59(9): 1253-1264.
[2] 丁桦, 张宇, 蔡明晖, 唐正友. 奥氏体基Fe-Mn-Al-C轻质钢的研究进展[J]. 金属学报, 2023, 59(8): 1027-1041.
[3] 徐永生, 张卫刚, 徐凌超, 但文蛟. 铁素体晶间变形协调与硬化行为模拟研究[J]. 金属学报, 2023, 59(8): 1042-1050.
[4] 张海峰, 闫海乐, 方烽, 贾楠. FeMnCoCrNi高熵合金双晶微柱变形机制的分子动力学模拟[J]. 金属学报, 2023, 59(8): 1051-1064.
[5] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096.
[6] 李福林, 付锐, 白云瑞, 孟令超, 谭海兵, 钟燕, 田伟, 杜金辉, 田志凌. 初始晶粒尺寸和强化相对GH4096高温合金热变形行为和再结晶的影响[J]. 金属学报, 2023, 59(7): 855-870.
[7] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[8] 刘俊鹏, 陈浩, 张弛, 杨志刚, 张勇, 戴兰宏. 高熵合金的低温塑性变形机制及强韧化研究进展[J]. 金属学报, 2023, 59(6): 727-743.
[9] 王长胜, 付华栋, 张洪涛, 谢建新. 冷轧变形对高性能Cu-Ni-Si合金组织性能与析出行为的影响[J]. 金属学报, 2023, 59(5): 585-598.
[10] 万涛, 程钊, 卢磊. 组元占比对层状纳米孪晶Cu力学行为的影响[J]. 金属学报, 2023, 59(4): 567-576.
[11] 冀秀梅, 侯美伶, 王龙, 刘玠, 高克伟. 基于机器学习的中厚板变形抗力模型建模与应用[J]. 金属学报, 2023, 59(3): 435-446.
[12] 姜江, 郝世杰, 姜大强, 郭方敏, 任洋, 崔立山. NiTi-Nb原位复合材料的准线性超弹性变形[J]. 金属学报, 2023, 59(11): 1419-1427.
[13] 陈斐, 邱鹏程, 刘洋, 孙兵兵, 赵海生, 沈强. 原位激光定向能量沉积NiTi形状记忆合金的微观结构和力学性能[J]. 金属学报, 2023, 59(1): 180-190.
[14] 杨超, 卢海洲, 马宏伟, 蔡潍锶. 选区激光熔化NiTi形状记忆合金研究进展[J]. 金属学报, 2023, 59(1): 55-74.
[15] 张鑫, 崔博, 孙斌, 赵旭, 张欣, 刘庆锁, 董治中. Y元素对Cu-Al-Ni高温形状记忆合金性能的影响[J]. 金属学报, 2022, 58(8): 1065-1071.