Please wait a minute...
金属学报  2011, Vol. 47 Issue (4): 442-448    DOI: 10.3724/SP.J.1037.2010.00466
  论文 本期目录 | 过刊浏览 |
带腐蚀产物超高强度钢的电化学行为
孙敏1), 肖葵1), 董超芳1), 李晓刚1), 钟平2)
1) 北京科技大学腐蚀与防护中心, 北京 100083
2) 北京航空材料研究院, 北京 100095
ELECTROCHEMICAL BEHAVIORS OF ULTRA HIGH STRENGTH STEELS WITH CORROSION PRODUCTS
SUN Min1), XIAO Kui1), DONG Chaofang1), LI Xiaogang2)
1) Corrosion and Protection Center, University of Science and Technology Beijing, Beijing 100083
2) Beijing Institute of Aeronautical Materials, Beijing 100095
引用本文:

孙敏 肖葵 董超芳 李晓刚 钟平. 带腐蚀产物超高强度钢的电化学行为[J]. 金属学报, 2011, 47(4): 442-448.
, , , , . ELECTROCHEMICAL BEHAVIORS OF ULTRA HIGH STRENGTH STEELS WITH CORROSION PRODUCTS[J]. Acta Metall Sin, 2011, 47(4): 442-448.

全文: PDF(1200 KB)  
摘要: 采用动电位极化、电化学阻抗、扫描电镜(SEM)、扫描Kelvin探针(SKP)和Raman光谱研究了300M和AerMet 100超高强度钢盐雾实验后试样的电化学行为. 结果表明, 300M钢在盐雾实验中生成的腐蚀产物为γ-FeOOH和Fe(OH)3; AerMet 100的腐蚀产物为 β-FeOOH, Fe3O4γ-Fe2O3. Fe3O4γ-Fe2O3γ-FeOOH致密, 更加有效阻碍了O2和Cl-的扩散, 对基体起到很好的保护作用. 随盐雾时间的延长, 2种钢的腐蚀电位均降低, 腐蚀电流密度均增大, 阳极溶解作用增强; 300M钢的腐蚀产物电阻随腐蚀产物的集聚而增大, 随脱落而减小; 带腐蚀产物的 AerMet 100的电化学过程受扩散作用控制, Warburg阻抗随盐雾进行而增大. 盐雾实验后2种超高强度钢的Kelvin电位值较未盐雾时高0.5-0.6 V, 且整个测试面的Kelvin电位值随盐雾时间的延长而逐渐不均匀. 300M的腐蚀产物保护作用较差, AerMet 100的耐蚀性和腐蚀产物的保护性能优于300M.
关键词 超高强度钢扫描Kelvin探针Raman光谱腐蚀产物微区电化学    
Abstract:The electrochemical behaviors of ultra high strength steels, 300M and AerMet 100, with corrosion products which were formed during salt spray test were studied using potentiodynamic polarization curve, EIS, SEM, scan Kelvin probe (SKP) and Raman spectroscopy. The results show that the corrosion products on the steel 300M are γ-FeOOH and Fe(OH)3, and those on the steel AerMet 100 are β-FeOOH, Fe3O4 and γ-Fe2O3 after salt spray test. Because of the compact characterization, Fe3O4 and γ-Fe2O3 have a better protection property for substrate by hindering the permeation of O2 and Cl-. The corrosion potentials shift negatively and corrosion current densities become larger with increasing salt spray time, meaning a faster rate of anodic dissolution for these two steels. After salt spray test, the values of Kelvin potential for the two steels are 0.5-0.6 V positive than those before tests, and more uneven. For 300M, the corrosion resistance of rust layer becomes larger/smaller with the corrosion productions gathering/drapping on/from the samples. The electrochemical reaction for AerMet 100 is diffusion--controlled process and the value of Warburg impedence which expresses the diffusion--hindering effect becomes larger. The corrosion resistance and protection ability of corrosion products for steel AerMet 100 are better than those of steel 300M.
Key wordsultra high strength steel    scan Kelvin probe    Raman spectroscopy    corrosion product    micro electrochemistry
收稿日期: 2010-09-13     
ZTFLH: 

TG 172.4

 
基金资助:

国家科技部基础条件平台建设项目2005DKA10400和国家自然科学基金项目51001012资助

作者简介: 孙敏, 女, 1985年生, 博士生
[1] Gra¸ca M L A, Hoo C Y, Silva O M M, Lourenco N J. Eng Fail Anal, 2009; 16: 182

[2] Ritchie R O, Horn R M. Metall Mater Trans, 1978; 9A: 331

[3] Garrison W M J, Moody N R. Metall Mater Trans, 1987; 18A: 1257

[4] Li J, Li Z, Yan M G. Mater Eng, 2007; (4): 61

(李杰, 李志, 颜鸣皋. 材料工程, 2007; (4): 61)

[5] Hao X L, Liu J H, Li S M, Yu M,Wang ZW. J Aeronaut Mater, 2010; 30(1): 67

(郝雪龙, 刘建华, 李松梅, 于美, 王宗武. 航空材料学报, 2010; 30(1): 67)

[6] Liu D X, Jin S, He J W. Spec Steel, 1997; 18(6): 20

(刘道新, 金 石, 何家文. 特殊钢, 1997; 18(6): 20)

[7] Youngblood J L, Raghavan M. Metall Trans, 1977; 8A: 1439

[8] Padmanabhan R, Wood W E. Mater Sci Eng, 1984; 66: 125

[9] Pound B G. Acta Mater, 1998; 46: 5733

[10] Figueroal D, Robinson M J. Corros Sci, 2010; 52: 1593

[11] Zhang H, Li X G, Du C W, Qi H B, Huang Y Z. J Raman Spectrosc, 2009; 409: 656

[12] Hao X C, Su P, Xiao K, Dong C F, Li X G. Corros Prot, 2009; 30: 297

(郝献超, 苏 鹏, 肖 葵, 董超芳, 李晓刚. 腐蚀与防护, 2009; 30: 297)

[13] Fu A Q, Tang X, Cheng Y F. Corros Sci, 2009; 51: 186

[14] Evans U R. Corros Sci, 1972; 12: 227

[15] Zhong J Y, Sun M, Liu D B, Li X G, Liu T Q. Int J Miner Metall Mater, 2010; 17: 282

[16] Ting X, Cheng Y F. Electrochim Acta, 2009; 54: 1499

[17] Dong C F, Sheng H, An Y H, Li X G, Xiao K, Cheng Y F. Prog Org Coat, 2010; 67: 269

[18] Sun M, Xiao K, Dong C F, Li X G. Acta Metall Sin (Engl Lett), 2010; 23: 301

[19] Zhou J L, Li X G, Du C W, Li Y L, Li T, Pan Y. Acta Metall Sin, 2010; 46: 251

(周建龙, 李晓刚, 杜翠薇, 李云玲, 李涛, 潘莹. 金属学报, 2010, 46: 251)
[1] 李小涵, 曹公望, 郭明晓, 彭云超, 马凯军, 王振尧. 低碳钢Q235、管线钢L415和压力容器钢16MnNi在湛江高湿高辐照海洋工业大气环境下的初期腐蚀行为[J]. 金属学报, 2023, 59(7): 884-892.
[2] 张开元, 董文超, 赵栋, 李世键, 陆善平. 固态相变对Fe-Co-Ni超高强度钢长臂梁构件焊接-淬火过程应力和变形的影响[J]. 金属学报, 2023, 59(12): 1633-1643.
[3] 石增敏, 梁静宇, 李箭, 王毛球, 方子帆. 板条马氏体拉伸塑性行为的原位分析[J]. 金属学报, 2021, 57(5): 595-604.
[4] 刘雨薇, 赵洪涛, 王振尧. 碳钢和耐候钢在南沙海洋大气环境中的初期腐蚀行为[J]. 金属学报, 2020, 56(9): 1247-1254.
[5] 宋学鑫, 黄松鹏, 汪川, 王振尧. 碳钢在红沿河海洋工业大气环境中的初期腐蚀行为[J]. 金属学报, 2020, 56(10): 1355-1365.
[6] 陈星晨, 王杰, 陈德任, 钟舜聪, 王向峰. Na对于Al早期大气腐蚀的影响[J]. 金属学报, 2019, 55(4): 529-536.
[7] 舒韵, 闫茂成, 魏英华, 刘福春, 韩恩厚, 柯伟. X80管线钢表面SRB生物膜特征及腐蚀行为[J]. 金属学报, 2018, 54(10): 1408-1416.
[8] 张慧, 杜艳霞, 李伟, 路民旭. 不同环境介质中X70钢的交流腐蚀行为及腐蚀产物膜层分析[J]. 金属学报, 2017, 53(8): 975-982.
[9] 惠亚军,潘辉,李文远,刘锟,陈斌,崔阳. 1000 MPa级Nb-Ti微合金化超高强度钢加热制度研究[J]. 金属学报, 2017, 53(2): 129-139.
[10] 许立宁,王贝,路民旭. 6.5%Cr钢在高温高压CO2环境下的腐蚀行为研究*[J]. 金属学报, 2016, 52(6): 672-678.
[11] 孙敏,李晓刚,李劲. 新型超高强度钢Cr12Ni4Mo2Co14在酸性环境中的应力腐蚀行为*[J]. 金属学报, 2016, 52(11): 1372-1378.
[12] 康举,李吉超,冯志操,邹贵生,王国庆,吴爱萍. 2219-T8铝合金搅拌摩擦焊接头力学和应力腐蚀性能薄弱区研究*[J]. 金属学报, 2016, 52(1): 60-70.
[13] 曹凤婷, 魏洁, 董俊华, 柯伟. 20SiMn钢在恒定pH值的碳酸盐溶液中的腐蚀行为*[J]. 金属学报, 2014, 50(6): 674-684.
[14] 丁康康, 肖葵, 邹士文, 董超芳, 赵瑞涛, 李晓刚. PCB-HASL电路板在NaHSO3/Na2SO3溶液中的腐蚀电化学行为[J]. 金属学报, 2014, 50(10): 1269-1278.
[15] 王彬彬, 王振尧, 曹公望, 刘艳洁, 柯伟. 2024铝合金在中国西部盐湖大气环境中的局部腐蚀行为*[J]. 金属学报, 2014, 50(1): 49-56.