INFLUENCE OF CYCLIC EXTRUSION AND COMPRESSION ON THE MECHANICAL PROPERTIES OF ZK60 ALLOY

Acta Metall Sin

2008, Vol. 44

Issue (1): 55-58 DOI:

Research Articles

Current Issue | Archive | Adv Search

INFLUENCE OF CYCLIC EXTRUSION AND COMPRESSION ON THE MECHANICAL PROPERTIES OF ZK60 ALLOY

LIN Jin-bao;Wang Qudong;Peng Liming;Chen Yongjun

上海交通大学轻合金精密成型国家工程研究中心

Cite this article:

LIN Jin-bao; Wang Qudong; Peng Liming; Chen Yongjun. INFLUENCE OF CYCLIC EXTRUSION AND COMPRESSION ON THE MECHANICAL PROPERTIES OF ZK60 ALLOY. Acta Metall Sin, 2008, 44(1): 55-58 .

Download:

PDF(221KB)
Export: BibTeX | EndNote (RIS)

Abstract Effects of cyclic extrusion and compression (CEC) deformation on the microstructure, texture and mechanical properties of ZK60 Mg alloy were investigated. The strengthening mechanism of CECed ZK60 Mg alloy was discussed in detail. Results shown, after subjected to CEC deformation 8 passes at 350℃, the microstructure of ZK60 alloy is dramatically refined and uniformed, the average grain size is decreased from ～20µm to ～1.5µm, the initial fiber texture is vanished and revealed a {10-13}<30-32>+{10-11}<15-43> texture. With the microstructure refining and texture changing, the compression yield stress of ZK60 alloy increased dramatically and the tension yield stress decreased slightly. As a result, the strength-differential effect (SDE) of ZK60 alloy is eliminated. At the same time, the ductility of ZK60 alloy is enhanced, especially under compression, the elongation is increased up to 38% from 15%.

Key words: ZK60 magnesium alloy cyclic extrusion compression(CEC) texture mechanical properties

Received: 17 May 2007

ZTFLH:

TG146.2

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	LIN Jin-bao
	Wang Qudong
	Peng Liming
	Chen Yongjun

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2008/V44/I1/55

[1]Westengen H K.Light Met Age,2000;58(3-4):44
[2]Pekguleryuz M O.Mater Sci Forum,2000;350:131
[3]Dwain M,Magers A.Light Met Age,1996;54(9-10):60
[4]Yong M S,Clegg A J.J Mater Process Technol,2004;145: 134
[5]Yang Q,Ghosh A K.Acta Mater,2006;54:5159
[6]Avedesian M M,Baker H.ASM Specialty Handbook:Mag- nesium and Magnesium Alloys.Materials Park,OH:ASM International,1999:17
[7]Wang Y N,Huang J C.Acta Mater,2007;55:897
[8]Mukai T,Yamanoi M,Watanabe H,Higashi K.Scr Mater, 2001;45:89
[9]Stohr J F,Poirier J P.Philos Mag,1972;25:1313
[10]Obara T,Yoshinaga H,Morozumi S.Acta Mater,1973; 21:845
[11]Mabuchi M,Iwahashi H,Yanase K,Higashi K.Scr Mater, 1996;36:681
[12]KimW J,Hong S I,Kim Y S,Min S H,Jeong H T,Lee J D.Acta Mater,2003;51:3293
[13]Lin J B,Wang Q D,Chen Y J,Zhang L J,Ding W J. Trans Nonferrous Met Soc Chin,2006;16:206
[14]Barret C,Massalski T B.Structure of Metals.3rd ed., Oxford:Pergamon Press,1980:768
[15]Kim W J,Hong S I,Kim Y S.Acta Mater,2003;51:3293
[16]Mueller K,Mueller S.J Mater Process Technol,2007;187- 188:775
[17]Zhou H T,Ma C J,Zeng X Q,Ding W J.Mater Rev, 2003;17(11):16 (周海涛，马春江，曾小勤，丁文江．材料导报，2003；17(11)：16)
[18]Mueller S,Mueller K,Rosumek M,Reimers W.Alu- minium Int J,2006;82:327
[19]Spitzig W A,Richmond O.Acta Metall,1984;32:457
[20]Guo Q,Yan H G,Chen Z H,Zhang H.Acta Metall Sin, 2006;42:739 (郭强，严红革，陈振华，张辉．金属学报，2006；42：739)
[21]Valiev R Z,Islamgaliev R K,Alexandrov I V.Prog Mater Sci,2000;45:103
[22]Meyers M A,Mishra A,Benson D J.Prog Mater Sci,2006; 51:427
[23]Christian J W,Mahajan S.Prog Mater Sci,1995;39:1
[24]Chen Z H,Yang C H,Huang C Q,Xia W J,Yan H G. Mater Rev,2006;20(8):107 (陈振华，杨春花，黄长清，夏伟军，严红革．材料导报，2006；20(8)：107)
[25]Perex-Prado M T,Valle J A,Ruano O A.Scr Mater, 2004;50:667

[1]	CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074.
[2]	SHAO Xiaohong, PENG Zhenzhen, JIN Qianqian, MA Xiuliang. Unravelling the { $10 1 ¯ 2$ } Twin Intersection Between LPSO Structure/SFs in Magnesium Alloy[J]. 金属学报, 2023, 59(4): 556-566.
[3]	TANG Weineng, MO Ning, HOU Juan. Research Progress of Additively Manufactured Magnesium Alloys: A Review[J]. 金属学报, 2023, 59(2): 205-225.
[4]	ZHU Yunpeng, QIN Jiayu, WANG Jinhui, MA Hongbin, JIN Peipeng, LI Peijie. Microstructure and Properties of AZ61 Ultra-Fine Grained Magnesium Alloy Prepared by Mechanical Milling and Powder Metallurgy Processing[J]. 金属学报, 2023, 59(2): 257-266.
[5]	LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447.
[6]	CHEN Yang, MAO Pingli, LIU Zheng, WANG Zhi, CAO Gengsheng. Detwinning Behaviors and Dynamic Mechanical Properties of Precompressed AZ31 Magnesium Alloy Subjected to High Strain Rates Impact[J]. 金属学报, 2022, 58(5): 660-672.
[7]	ZENG Xiaoqin, WANG Jie, YING Tao, DING Wenjiang. Recent Progress on Thermal Conductivity of Magnesium and Its Alloys[J]. 金属学报, 2022, 58(4): 400-411.
[8]	JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556.
[9]	YANG Ping, WANG Jinhua, MA Dandan, PANG Shufang, CUI Feng'e. Influences of Composition on the Transformation-Controlled {100} Textures in High Silicon Electrical Steels Prepared by Mn-Removal Vacuum Annealing[J]. 金属学报, 2022, 58(10): 1261-1270.
[10]	LI Shaojie, JIN Jianfeng, SONG Yuhao, WANG Mingtao, TANG Shuai, ZONG Yaping, QIN Gaowu. Multimodal Microstructure of Mg-Gd-Y Alloy Through an Integrated Simulation of “Process-Structure-Property”[J]. 金属学报, 2022, 58(1): 114-128.
[11]	DING Ning, WANG Yunfeng, LIU Ke, ZHU Xunming, LI Shubo, DU Wenbo. Microstructure, Texture, and Mechanical Properties of Mg-8Gd-1Er-0.5Zr Alloy by Multi-Directional Forging at High Strain Rate[J]. 金属学报, 2021, 57(8): 1000-1008.
[12]	YAN Mengqi, CHEN Liquan, YANG Ping, HUANG Lijun, TONG Jianbo, LI Huanfeng, GUO Pengda. Effect of Hot Deformation Parameters on the Evolution of Microstructure and Texture of β Phase in TC18 Titanium Alloy[J]. 金属学报, 2021, 57(7): 880-890.
[13]	ZUO Liang, LI Zongbin, YAN Haile, YANG Bo, ZHAO Xiang. Texturation and Functional Behaviors of Polycrystalline Ni-Mn-X Phase Transformation Alloys[J]. 金属学报, 2021, 57(11): 1396-1415.
[14]	PAN Fusheng, JIANG Bin. Development and Application of Plastic Processing Technologies of Magnesium Alloys[J]. 金属学报, 2021, 57(11): 1362-1379.
[15]	WANG Huiyuan, XIA Nan, BU Ruyu, WANG Cheng, ZHA Min, YANG Zhizheng. Current Research and Future Prospect on Low-Alloyed High-Performance Wrought Magnesium Alloys[J]. 金属学报, 2021, 57(11): 1429-1437.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed