Please wait a minute...
Acta Metall Sin  2010, Vol. 46 Issue (8): 941-945    DOI: 10.3724/SP.J.1037.2010.00143
论文 Current Issue | Archive | Adv Search |
EFFECTS OF PRECIPITATION FOR AGING ONMECHANICAL AND CORROSION RESISTANCE PROPERTIES OF CAST 2507 SUPER DUPLEX STAINLESS STEEL
XIANG Hongliang, LIU Dong, RUAN Fangru, HE Fushan, HUANG Liguang
School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108
Cite this article: 

XIANG Hongliang LIU Dong RUAN Fangru HE Fushan HUANG Liguang. EFFECTS OF PRECIPITATION FOR AGING ONMECHANICAL AND CORROSION RESISTANCE PROPERTIES OF CAST 2507 SUPER DUPLEX STAINLESS STEEL. Acta Metall Sin, 2010, 46(8): 941-945.

Download:  PDF(7008KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Duplex stainless steel (DSS) has been used widely due to its very excellent combination of mechanical and corrosion resistance properties. However, the use of DSS is limited by their susceptibility to the formation of dangerous intermetallic phases, such as χ phase and phase, resulting in the detrimental effects on mechanical properties and corrosion resistance. With the application of the super duplex stainless steel (SDSS) with a pitting resistance equivalent number more than 40. The harmful effects of intermetallic phases easily precipitated in DSS on mechanical properties and corrosion resistance are a research focus. This paper, based on prior study, investigates the effects of intermetallic phases formed during aging on the mechanical properties and corrosion resistance of cast 2507 super duplestainless steel by means of optical microscope (OM), scanning electron microscope (SEM), tensile test and electrochemical test. The results indicate that for the solution annealing cast 2507 super duplex stainless steel aged in the temperature range 650—950 ℃, small and depressive distribution χ phase precipitatd from ferrite can increase its tensile strength, but σ phase causes the opposing effect on its plasticity owing to precipitated along grain boundaries. Both of them can rapidly deteriorate its plasticity, and cause brittle failure. The effect of σ phase on corrosion resistance of 2507 SDSS is weaker than phase. The more the σ phase is, the worse the corrosion resistant could be.

Key words:  cast 2507 super duplex stainless steel      intermetallic phase      mechanical roperty      corrosion resistance     
Received:  25 March 2010     
Fund: 

Supported by Program for Service of Enterprise by Technical Personnel, the Ministry of Science and Technology of China (No.2009GJC40018), Innovation Foundation for Young Talent of Fujian Province (No.2008F3061) and Technological Development Foundation of Fuzhou University (No.2008–XQ–16)

URL: 

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2010.00143     OR     https://www.ams.org.cn/EN/Y2010/V46/I8/941

[1] Wu J. Corrosion & Protection in Petrochem Industry, 1996; 13: 6 (吴玖.石油化工腐蚀与防护. 1996; 13: 6) [2] Graham G. 2th Int Conf on Duplex Stainless Steel. Beijing: Stainless steel council China Special steel Enterprises association, 2006:218 [3] Benson M, Snis M. 2th Int Conf on Duplex Stainless Steel. Beijing: Stainless steel council China Special steel Enterprises association, 2006:17 [4] Erich F, translated by Su Z X. Welding metallurgy of stainless steel, Beijing: Chemical Industry Press, 2004: 74 (Erich F著, 栗卓新译. 不锈钢焊接冶金. 北京: 化学工业出版社, 2004: 74) [5] Henrik S, Rolf S. Mater Sci Eng, 2007, 444A: 271 [6] Elmer J W, Palmer T A. Mater Sci Eng, 2007, 459 A: 151 [7] Russell S W, Lundin C D. Final Report for the Development of Energy: the Development of Qualification Standards for Cast Duplex Stainless Steel the University of Tennessee Knoxville, 2005,2:8 [8] Ezuber H M,. El-Houd A,. El-Shawesh F. Desalination. 2007, 207: 268 [9]Huang C, Shih C. Mater Sci Eng, 2005,A402: 66 [10] Chen J Y, Yang Z Y, Yang W, Su J, Luo F H. J Iron Steel Res, 2006; 18:2 (陈嘉砚, 杨卓越, 杨武, 苏杰, 罗丰华. 钢铁研究学报. 2006, 18: 1) [11] Long J M, Fan A M. Phys Test, 1997; 15(1):1 (龙晋明, 樊爱民. 物理测试. 1997; 15(1):1) [12] Otarola T, Hollner S, Bonnefois B. Eng Fail Anal, 2005; 12: 930 [13] Marcelo M, Leonardo R F. Mater Char. 2007; doi:10.1016/j.matchar.2007.02.010. [14] Pohl M, Storz O, Glogowski T. Mater Sci Eng, 2007, 58: 66. [15].Redja A,. Proult A,. Donnadieu P,. Morniroli J. J Mater Sci, 2004; 39: 2386. [16] Takuyo Y, Satoshi O, Hisashi K. J Nuclear Mater. 2006, 350: 47 [17] Xiang H L, He F S, Liu D. Acta Metall Sin, 2009; 45:1456 (向红亮, 何福善, 刘东. 金属学报, 2009; 45: 1456 [18] Jang Y, Kim S, Lee J. Metall Mater Trans, 2005; 36A: 1229 [19] Chiu P K, Wang S.H, Yang J R, Weng K L, Jason F. Mater Chem Phys, 2006; 98: 103 [20] Zhong Q P. Zhao Z H. Fractography. Beijing: High Education Press, 2006: 202 (钟群鹏, 赵子华. 断口学. 北京: 高等教育出版社, 2006:202) [21] Tavares S S, Terra V. F, Neto P, Lima, D E. Matos. Microchimica Acta. 2005, 40: 4025 [22] Xiang H L, Huang W L, Liu D, He F S. Acta Metall Sin. 2010, 46:304 (向红亮, 黄伟林, 刘东, 何福善. 金属学报. 2010, 46: 304)
[1] SI Yongli, XUE Jintao, WANG Xingfu, LIANG Juhua, SHI Zimu, HAN Fusheng. Effect of Cr Addition on the Corrosion Behavior of Twinning-Induced Plasticity Steel[J]. 金属学报, 2023, 59(7): 905-914.
[2] XU Linjie, LIU Hui, REN Ling, YANG Ke. Effect of Cu on In-Stent Restenosis and Corrosion Resistance of Ni-Ti Alloy[J]. 金属学报, 2023, 59(4): 577-584.
[3] ZHAO Xiaofeng, LI Ling, ZHANG Han, LU Jie. Research Progress in High-Entropy Alloy Bond Coat Material for Thermal Barrier Coatings[J]. 金属学报, 2022, 58(4): 503-512.
[4] HUANG Yichuan, WANG Qing, ZHANG Shuang, DONG Chuang, WU Aimin, LIN Guoqiang. Optimization of Stainless Steel Composition for Fuel Cell Bipolar Plates[J]. 金属学报, 2021, 57(5): 651-664.
[5] ZHU Wenting, CUI Junjun, CHEN Zhenye, FENG Yang, ZHAO Yang, CHEN Liqing. Design and Performance of 690 MPa Grade Low-Carbon Microalloyed Construction Structural Steel with High Strength and Toughness[J]. 金属学报, 2021, 57(3): 340-352.
[6] WANG Xuemei, YIN Zhengzheng, YU Xiaotong, ZOU Yuhong, ZENG Rongchang. Comparison of Corrosion Resistance of Phenylalanine, Methionine, and Asparagine-Induced Ca-P Coatings on AZ31 Magnesium Alloys[J]. 金属学报, 2021, 57(10): 1258-1271.
[7] CHEN Yongjun, BAI Yan, DONG Chuang, XIE Zhiwen, YAN Feng, WU Di. Passivation Behavior on the Surface of Stainless Steel Reinforced by Quasicrystal-Abrasive via Finite Element Simulation[J]. 金属学报, 2020, 56(6): 909-918.
[8] Lin WEI,Zhijun WANG,Qingfeng WU,Xuliang SHANG,Junjie LI,Jincheng WANG. Effect of Mo Element and Heat Treatment on Corrosion Resistance of Ni2CrFeMox High-Entropy Alloyin NaCl Solution[J]. 金属学报, 2019, 55(7): 840-848.
[9] Xiubing LIANG, Jianwen FAN, Zhibin ZHANG, Yongxiong CHEN. Microstructure and Corrosion Properties of Aluminum Base Amorphous and Nanocrystalline Composite Coating[J]. 金属学报, 2018, 54(8): 1193-1203.
[10] Li FAN, Haiyan CHEN, Yaohua DONG, Xueying LI, Lihua DONG, Yansheng YIN. Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions[J]. 金属学报, 2018, 54(7): 1019-1030.
[11] Haiou YANG, Xuliang SHANG, Lilin WANG, Zhijun WANG, Jincheng WANG, Xin LIN. Effect of Constituent Elements on the Corrosion Resistance of Single-Phase CoCrFeNi High-Entropy Alloys in NaCl Solution[J]. 金属学报, 2018, 54(6): 905-910.
[12] Ke YANG, Mengchao U, Jialong AN, Wei NG. Research and Development of Maraging Stainless Steel Used for New Generation Landing Gear[J]. 金属学报, 2018, 54(11): 1567-1585.
[13] Erlin ZHANG, Xiaoyan WANG, Yong HAN. Research Status of Biomedical Porous Ti and Its Alloy in China[J]. 金属学报, 2017, 53(12): 1555-1567.
[14] Cong PENG, Shuyuan ZHANG, Ling REN, Ke YANG. Effect of Cooling Rate on Microstructure and Properties ofa Cu-Containing Titanium Alloy[J]. 金属学报, 2017, 53(10): 1377-1384.
[15] Chao XIA, Shi QIAN, Donghui WANG, Xuanyong LIU. Properties of Carbon Ion Implanted Biomedical Titanium[J]. 金属学报, 2017, 53(10): 1393-1401.
No Suggested Reading articles found!