|
|
Research and Development of Maraging Stainless Steel Used for New Generation Landing Gear |
Ke YANG1, Mengchao U1,2, Jialong AN3, Wei NG1 |
1 Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China 2 School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China 3 School of Metallurgy, Northeastern University, Shenyang 110819, China |
|
Cite this article:
Ke YANG, Mengchao U, Jialong AN, Wei NG. Research and Development of Maraging Stainless Steel Used for New Generation Landing Gear. Acta Metall Sin, 2018, 54(11): 1567-1585.
|
Abstract Properties of landing gear are closely related to the service safety of aircraft. Thus, it is essential to improve the comprehensive properties of the material used for landing gear. This article briefly introduces the application status and existing problems of currently used landing gear materials, and then proposes future developing directions of landing gear materials. Finally, a new maraging stainless steel with high strength, high toughness and good corrosion resistance, which can be a promising steel for the new generation landing gear material, is introduced.
|
Received: 30 July 2018
|
|
Fund: Supported by National Natural Science Foundation of China (No.51201160), National Natural Science Foundation of China Research Fund for International Young Scientists (No.51750110515), Youth Innovation Promotion Association of Chinese Academy of Sciences (No.2017233) and Innovation Project of Institute of Metal Research, Chinese Academy of Sciences (No.2015-ZD04) |
[1] | Tomita Y.Development of fracture toughness of ultrahigh strength, medium carbon, low alloy steels for aerospace applications[J]. Int. Mater. Rev., 2000, 45: 27 | [2] | Sun H M, Li M Q, Liu Y G.Development of processing map coupling grain size for the isothermal compression of 300 M steel[J]. Mater. Sci. Eng., 2014, A595: 77 | [3] | Hemphill R M, Wert D E, Novotny P M, et al.High strength, high fracture toughness alloy [P]. US Pat, 5268044, 1993 | [4] | Zhao Z Y.Studing status on the secondary hardening phenomenon in ultra-high strength steels[J]. J. Aeronaut. Mater., 2002, 22(4): 46(赵振业. 超高强度钢中二次硬化现象研究 [J]. 航空材料学报, 2002, 22(4): 46) | [5] | Manigandan K, Srivatsan T S, Tammana D, et al.Influence of microstructure on strain-controlled fatigue and fracture behavior of ultra high strength alloy steel AerMet 100[J]. Mater. Sci. Eng., 2014, A601: 29 | [6] | Liu P, Cai J P, Wang X D, et al.Progress of aircraft landing gear material protection technology[J]. Equip. Environ. Eng., 2011, 8(2): 67(刘鹏, 蔡健平, 王旭东等. 飞机起落架材料防护技术现状及研究进展 [J]. 装备环境工程, 2011, 8(2): 67) | [7] | Li B.Methods for improving adhesion of HVOF spraying coatings on 300M steel parts[J]. New Technol. New Process, 2015,(2): 121(李 博. 提高300M钢零件HVOF涂层结合力的方法 [J]. 新技术新工艺, 2015, (2): 121) | [8] | Seo J Y, Park S K, Kwon H, et al.Influence of carbide modifications on the mechanical properties of ultra-high-strength stainless steels[J]. Metall. Mater. Trans., 2017, 48A: 4477 | [9] | Kuehmann C, Tufts B, Trester P.Computational design for ultra high-strength alloy[J]. Adv. Mater. Proc., 2008, 166: 37 | [10] | Zhong P, Zhang Y Q, Zhong J Y, et al.A new type of structural material S280[J]. Sci. Technol. Rev., 2015, 33(11): 59(钟平, 张业勤, 钟锦岩等. 一种新型结构材料S280 [J]. 科技导报, 2015, 33(11): 59) | [11] | Zhan Z W, Sun Z H, Tang Z H.Effect of chemical passivation on properities of S280 ultra high-strength stainless steel[J]. Corros. Prot., 2015, 36: 742(詹中伟, 孙志华, 汤智慧. 化学钝化对S280超高强度不锈钢综合性能的影响 [J]. 腐蚀与防护, 2015, 36: 742) | [12] | Martin J W, Kosa T.Ultra-high-strength precipitation-hardenable stainless steel and strip made therefrom [P]. US Pat, 6630103B2, 2003 | [13] | Ifergane S, Sabatani E, Carmeli B, et al.Hydrogen diffusivity measurement and microstructural characterization of Custom 465 stainless steel[J]. Electrochim. Acta, 2015, 178: 494 | [14] | H?ttestrand M, Nilsson J O, Stiller K, et al.Precipitation hardening in a 12%Cr-9%N-4%Mo-2%Cu stainless steel[J]. Acta Mater., 2004, 52: 1023 | [15] | Guo Z, Sha W, Vaumousse D.Microstructural evolution in a PH13-8 stainless steel after ageing[J]. Acta Mater., 2003, 51: 101 | [16] | Hsiao C N, Chiou C S, Yang J R.Aging reactions in a 17-4 PH stainless steel[J]. Mater. Chem. Phys., 2002, 74: 134 | [17] | Bajguirani H R H. The effect of ageing upon the microstructure and mechanical properties of type 15-5 PH stainless steel[J]. Mater. Sci. Eng., 2002, A338: 142 | [18] | Song Q M.High-performance and aviation application of custom 465? stainless steel[J]. Aeronaut. Manuf. Technol, 2012,(15): 104(宋全明. Custom 465?新型不锈钢的卓越性能及航空应用 [J]. 航空制造技术, 2012, (15): 104) | [19] | Long W Q.Development of large size steel Bar 0Cr17Ni4Cu4Nb for large size aero-engine casing[J]. Spec. Steel Technol., 2014, 20(2): 4(隆文庆. 大尺寸机匣用0Cr17Ni4Cu4Nb钢大规格棒材研制 [J]. 特钢技术, 2014, 20(2): 4) | [20] | Schnitzer R, Radis R, N?hrer M, et al.Reverted austenite in PH 13-8 Mo maraging steels[J]. Mater. Chem. Phys., 2010, 122: 138 | [21] | Bhambroo R, Roychowdhury S, Kain V, et al.Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel[J]. Mater. Sci. Eng., 2013, A568: 127 | [22] | Tian J L, Wang W, Yan W, et al.Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod[J]. Eng. Fail. Anal., 2016, 65: 57 | [23] | Wert D E, Disabella R P.Strong, corrosion-resistant stainless steel[J]. Adv. Mater. Proc., 2006, 164: 34 | [24] | Ping D H, Ohnuma M, Hirakawa Y, et al.Microstructural evolution in 13Cr-8Ni-2.5Mo-2Al martensitic precipitation-hardened stainless steel[J]. Mater. Sci. Eng., 2005, A394: 285 | [25] | Primig S, Stechauner G, Kozeschnik E.Early stages of Cu precipitation in 15-5 PH maraging steel revisited—Part I: Experimental analysis[J]. Steel Res. Int., 2017, 88: 1600084 | [26] | Andersson M, Stiller K, H?ttestrand M.Comparison of early stages of precipitation in Mo-rich and Mo-poor maraging stainless steels[J]. Surf. Interface Anal., 2007, 39: 195 | [27] | Schober M, Schnitzer R, Leitner H.Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel[J]. Ultramicroscopy, 2009, 109: 553 | [28] | Jiao Z B, Luan J H, Zhang Z W, et al.Synergistic effects of Cu and Ni on nanoscale precipitation and mechanical properties of high-strength steels[J]. Acta Mater., 2013, 61: 5996 | [29] | Decker R F, Floreen S.Maraging Steel Recent Developments and Applications Proceedings of Symposium of TMS Meeting[M]. Huntington: The Minerals, Metal & Materials Society, 1988: 1 | [30] | Tian J L, Wang W, Yin L C, et al.Three dimensional atom probe and first-principles studies on spinodal decomposition of Cr in a Co-alloyed maraging stainless steel[J]. Scr. Mater., 2016, 121: 37 | [31] | Zhang L, Xiang Z L, Li X D, et al.Spinodal decomposition in Fe-25Cr-12Co alloys under the influence of high magnetic field and the effect of grain boundary[J]. Nanomaterials, 2018, 8: 578 | [32] | Miller M K, Russell K F. Comparison of the rate of decomposition in Fe-45%Cr, Fe-45%Cr-5%Ni and duplex stainless steels [J]. Appl. Surf. Sci., 1996, 94-95: 398 | [33] | Stiller K, H?ttestrand M, Danoix F.Precipitation in 9Ni-12Cr-2Cu maraging steels[J]. Acta Mater., 1998, 46: 6063 | [34] | Jin S, Mahajan S, Brasen D.Mechanical properties of Fe-Cr-Co ductile permanent magnet alloys[J]. Metall. Mater. Trans., 1980, 11A: 69 | [35] | Hedstr?m P, Fei H Y, Zhou J, et al.The 475 ℃ embrittlement in Fe-20Cr and Fe-20Cr-X (X=Ni, Cu, Mn) alloys studied by mechanical testing and atom probe tomography[J]. Mater. Sci. Eng., 2013, A574: 123 | [36] | Ha K F, Zhang H M, Jing K L.An investigation on the mechanism of 475 ℃ embrittlement in high-Cr ferritic stainless steel[J]. Metall. Trans., 1989, 20A: 2563 | [37] | Park K H, LaSalle J C, Schwartz L H, et al. Mechanical properties of spinodally decomposed Fe-30 wt% Cr alloys: Yield strength and aging embrittlement[J]. Acta Metall., 1986, 34: 1853 | [38] | Minowa T, Okada M, Homma M.Further studies of the miscibility gap in an Fe-Cr-Co permanent magnet system[J]. IEEE Trans. Magn., 1980, 16: 529 | [39] | Zhu F, Haasen P, Wagner R.An atom probe study of the decomposition of Fe-Cr-Co permanent magnet alloys[J]. Acta Metall., 1986, 34: 457 | [40] | Brown J E, Smith G D W. Atom probe studies of spinodal processes in duplex stainless steels and single- and dual-phase Fe-Cr-Ni alloys[J]. Surf. Sci., 1991, 246: 285 | [41] | Klaver T P C, Drautz R, Finnis M W. Magnetism and thermodynamics of defect-free Fe-Cr alloys[J]. Phys. Rev., 2006, 74B: 094435 | [42] | Kaneko H, Homma M, Nakamura K, et al.Phase diagram of Fe-Cr-Co permanent magnet system[J]. IEEE Trans. Magn., 1977, 13: 1325 | [43] | Tian J L, Wang W, Shahzad M B, et al.A new maraging stainless steel with excellent strength-toughness-corrosion synergy[J]. Materials (Basel), 2016, 121: E1293 | [44] | Tian J L, Shahzad M B, Wang W, et al.Role of Co in formation of Ni-Ti clusters in maraging stainless steel[J]. J. Mater. Sci. Technol., 2018, 34: 1671 | [45] | Díaz-Ortiz A, Drautz R, F?hnle M, et al.First-principles modeling of magnetism and phase equilibria in binary alloys[J]. J. Alloys Compd., 2004, 369: 27 | [46] | Kuhnen C A, Bohland-Filho J.Electronic and magnetic structure of ordered Fe-Ni alloys[J]. Braz. J. Phys., 1993, 23: 288 | [47] | Cheng H P, Ellis D E.First-principles potentials in modeling structure and thermodynamics of Fe-Ni alloys[J]. Phys. Rev., 1989, 39B: 12469 | [48] | Weston W F, Granato A V.Cubic and hexagonal single-crystal elastic constants of a cobalt-nickel alloy[J]. Phys. Rev., 1975, 12B: 5355 | [49] | Natarajan Sathiyamoorthy Venkataramanan.Structures of small NixTiy (x+y≤5) clusters: A DFT study[J]. J. Mol. Struct.: THEO CHEM, 2008, 856: 9 | [50] | Zhu L F, Friák M, Dick A, et al.First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys[J]. Acta Mater., 2012, 60: 1594 | [51] | Cacciamani G, Ferro R, Ansara I, et al.Thermodynamic modelling of the Co-Ti system[J]. Intermetallics, 2000, 8: 213 | [52] | Li Y C, Yan W, Cotton J D, et al.A new 1.9 GPa maraging stainless steel strengthened by multiple precipitating species[J]. Mater. Des., 2015, 82: 56 | [53] | Tian J L, Wang W, Shahzad M B, et al.Corrosion resistance of Co-containing maraging stainless steel[J]. Acta Metall. Sin.(Engl. Lett.), 2018, 31: 785 | [54] | Abdelshehid M, Mahmodieh K, Mori K, et al.On the correlation between fracture toughness and precipitation hardening heat treatments in 15-5PH Stainless Steel[J]. Eng. Fail. Anal., 2007, 14: 626 | [55] | Rack H J, Kalish D.The strength, fracture toughness, and low cycle fatigue behavior of 17-4 PH stainless steel[J]. Metall. Trans., 1974, 5: 1595 | [56] | Rossi D J, Rossi J D.PH stainless is tougher than you thought[J]. Adv. Mater. Proc., 1987, 131: 45 |
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|