HYDROGEN ABSORPTION OF TiFe+xwt-%La ALLOYS WITH ALTERNATE LAYER STRUCTURE

Acta Metall Sin

1992, Vol. 28

Issue (4): 1-4 DOI:

Current Issue | Archive | Adv Search

HYDROGEN ABSORPTION OF TiFe+xwt-%La ALLOYS WITH ALTERNATE LAYER STRUCTURE

QIAN Jiuxin;ZHANG Yawen;CHEN Xudong Peking University; Beijing

Cite this article:

QIAN Jiuxin;ZHANG Yawen;CHEN Xudong Peking University; Beijing. HYDROGEN ABSORPTION OF TiFe+xwt-%La ALLOYS WITH ALTERNATE LAYER STRUCTURE. Acta Metall Sin, 1992, 28(4): 1-4.

Download:

PDF(1013KB)
Export: BibTeX | EndNote (RIS)

Abstract Superior hydrogen absorbability of the alloys of TiFe+xwt--%La with alternatelayer structure was found firstly. It would be available at 30℃ under 6 MPa H_2 without anyprior treatment.

Key words: TiFe La hydrogen absorption

Received: 18 April 1992

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y1992/V28/I4/1

1 Bronca V, Bergman P, Ghaemmaghami V, Khatamian D, Manchester F D. J Less-Common Met, 1985; 108: 313--325
2 Raj P, Satyamoorthy A, Suryanarayana P, Singh A J, Iyer R M. J Less-Common Met, 1987; 130: 139--145
3 Hirata T. J Less-Common Met, 1987; 130: 497--502
4 Suzuki J, Abe M, Yamaguchi T, Terazawa S. J Less-Common Met, 1987; 131: 301--309
5 Nagai H, Kitagaki K, Shoji K. J Less-Common Met, 1987; 134: 275--296
6 钱久信,赵黎明,郑朝贵,叶于浦.金属学报,1984;20:A423
7 Sandrock G D. Final Report BNL 352410s (Brookhaven National Laboratory), Upton, New York, 197

[1]	CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[2]	WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[3]	LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208.
[4]	BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[5]	XU Yongsheng, ZHANG Weigang, XU Lingchao, DAN Wenjiao. Simulation of Deformation Coordination and Hardening Behavior in Ferrite-Ferrite Grain Boundary[J]. 金属学报, 2023, 59(8): 1042-1050.
[6]	LIU Wei, CHEN Wanqi, MA Menghan, LI Kailun. Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion[J]. 金属学报, 2023, 59(8): 986-1000.
[7]	ZHANG Haifeng, YAN Haile, FANG Feng, JIA Nan. Molecular Dynamic Simulations of Deformation Mechanisms for FeMnCoCrNi High-Entropy Alloy Bicrystal Micropillars[J]. 金属学报, 2023, 59(8): 1051-1064.
[8]	MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086.
[9]	WANG Zongpu, WANG Weiguo, Rohrer Gregory S, CHEN Song, HONG Lihua, LIN Yan, FENG Xiaozheng, REN Shuai, ZHOU Bangxin. {111}/{111} Near Singular Boundaries in an Al-Zn-Mg-Cu Alloy Recrystallized After Rolling at Different Temperatures[J]. 金属学报, 2023, 59(7): 947-960.
[10]	ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883.
[11]	SI Yongli, XUE Jintao, WANG Xingfu, LIANG Juhua, SHI Zimu, HAN Fusheng. Effect of Cr Addition on the Corrosion Behavior of Twinning-Induced Plasticity Steel[J]. 金属学报, 2023, 59(7): 905-914.
[12]	SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[13]	LI Qian, LIU Kai, ZHAO Tianliang. Rust Formation Behavior and Mechanism of Q235 Carbon Steel in 5%NaCl Salt Spray Under Elastic Tensile Stress[J]. 金属学报, 2023, 59(6): 829-840.
[14]	ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
[15]	HOU Juan, DAI Binbin, MIN Shiling, LIU Hui, JIANG Menglei, YANG Fan. Influence of Size Design on Microstructure and Properties of 304L Stainless Steel by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 623-635.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed