Acta Metall Sin  1993, Vol. 29 Issue (8): 44-48    DOI:

Current Issue | Archive | Adv Search |

CRITICAL VOID-GROWTH STATE AND RELATED FRACTURE TOUGHNESS IN BHW60 STEEL

ZHOU Li;ZHENG Changqing;LU Zhixian;DING Fulian Northwestern Polyechnical University; Xi'an Iron and Steel Research Institute; Shanghai Baoshan Steel WorksDepartment of Engineering Mechanics;Northwestern Poly technical Uni versity; Xi'an 710072.

ZHOU Li;ZHENG Changqing;LU Zhixian;DING Fulian Northwestern Polyechnical University; Xi'an Iron and Steel Research Institute; Shanghai Baoshan Steel WorksDepartment of Engineering Mechanics;Northwestern Poly technical Uni versity; Xi'an 710072.. CRITICAL VOID-GROWTH STATE AND RELATED FRACTURE TOUGHNESS IN BHW60 STEEL. Acta Metall Sin, 1993, 29(8): 44-48.

Abstract References Related Articles Recommended Metrics Download:  PDF(348KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The critical void-grwoth ratio, R_c/ R_o, was measured quantitatively underSEM to the core of fracture surface of smooth and notched tensile specimens for BHW60steel at 20, -60, -100 and -140℃. Correlation between R_c/ R_0 and macroscopic fracturetoughness, V_(GC), as well as the effect of heat treated condition upon them were investigated.Results show that the R_c/ R_0 values are approximately obedient to normal probability dis-tribution at the same temperature, decrease linearly with the decrease of temperature and arerelated to V_(GC) as: V(GC)= Cln(R_c/ R_0), where C=3.5. This expression seems to be in goodagreement with the R-T model of void-grwoth and the coefficient C is insensitive to temper-ature and heat treated condition. Key words:  BHW60 steel      critical void state      fracture toughness      failure criterion      Received:  18 August 1993      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1993/V29/I8/44 1 张以增.金属学报,1983;19:A70 2 郑长卿,Radon J C.西北工业大学学报,1985;3:409 3 Garrison W M.Scr Metall, 1984, 18:583 4 郑长卿,Radon J C.西北工业大学学报,1985;3:21 5 Zheng C Q, Zhou L, Liu J M. In: Yan M G Zhang S H, Zheng Z M eds., Mechanical Behaviour of Materials-V, Vol. Ⅰ, Oxford: pergamon, 1987; 213 6 Zhou L, Zheng C Q. In: Zhang Z M, Li F N eds., Proceedings of the Ⅳ Conference of Asian--Pacific Congress on Strength Evaluation (APCS--91) , Vol. Ⅱ. International Academic publishers. 1991: 1079 7 Rice J R, Tracey D M. J Mech Phys Solids. 1969; 17: 201 [1] GU Ruicheng, ZHANG Jian, ZHANG Mingyang, LIU Yanyan, WANG Shaogang, JIAO Da, LIU Zengqian, ZHANG Zhefeng. Fabrication of Mg-Based Composites Reinforced by SiC Whisker Scaffolds with Three-Dimensional Interpenetrating-Phase Architecture and Their Mechanical Properties[J]. 金属学报, 2022, 58(7): 857-867. [2] HU Chen, PAN Shuai, HUANG Mingxin. Strong and Tough Heterogeneous TWIP Steel Fabricated by Warm Rolling[J]. 金属学报, 2022, 58(11): 1519-1526. [3] CHEN Ruirun, CHEN Dezhi, WANG Qi, WANG Shu, ZHOU Zhecheng, DING Hongsheng, FU Hengzhi. Research Progress on Nb-Si Base Ultrahigh Temperature Alloys and Directional Solidification Technology[J]. 金属学报, 2021, 57(9): 1141-1154. [4] Yizhe LI, Baoming GONG, Xiuguo LIU, Dongpo WANG, Caiyan DENG. Out-of-Plane Constraint Effect on the Fracture Toughness of Single Edge Notch Tension Specimens[J]. 金属学报, 2018, 54(12): 1785-1791. [5] Xiangli FENG,Lei WANG,Yang LIU. STUDY ON MICROSTRUCTURE AND DYNAMIC FRACTURE BEHAVIOR OF Q460 STEEL WELDING JOINTS[J]. 金属学报, 2016, 52(7): 787-796. [6] Yong SHEN,Jian XU. PREPARATION AND MECHANICAL PROPERTIES OF Zr46.9Cu45.5Al5.6Y2.0 IN SITU BMG COMPOSITES WITH B2-CuZr PHASE[J]. 金属学报, 2015, 51(11): 1407-1415. [7] ZHU Zhendong, XU Jian. Cu56Hf27Ti17 BULK METALLIC GLASS WITH HIGH FRACTURE TOUGHNESS[J]. 金属学报, 2013, 49(8): 969-975. [8] BI Zongyue, YANG Jun, NIU Jing, ZHANG Jianxun. FRACTURE TOUGHNESS OF WELDED JOINTS OF X100 HIGH-STRENGTH PIPELINE STEEL[J]. 金属学报, 2013, 49(5): 576-582. [9] SUN Qian, WANG Xiaonan, ZHANG Shunhu, DU Linxiu, DI Hongshuang. EFFECT OF MICROSTRUCTURE ON FRACTURE TOUGHNESS OF NEW TYPE HOT—ROLLED NANO—SCALE PRECIPITATION STRENGTHENING STEEL[J]. 金属学报, 2013, 49(12): 1501-1507. [10] JIA Xiaojiao ZHANG Jun SU Haijun SONG Kan LIU Lin FU Hengzhi. MICROSTRUCTURES AND MECHANICAL PROPERTIES OF Al2O3–BASIC EUTECTIC IN SITU COMPOSITES DIRECTIONALLY SOLIDIFIED BY LASER FLOATING ZONE REMELTING[J]. 金属学报, 2012, 48(12): 1479-1486. [11] MA Yue PAN Tao JIANG Bo CUI Yinhui SU Hang PENG Yun . STUDY OF THE EFFECT OF SULFUR CONTENTS ON FRACTURE TOUGHNESS OF RAILWAY WHEEL STEELS FOR HIGH SPEED TRAIN[J]. 金属学报, 2011, 47(8): 978-983. [12] ZHANG Xin ZHANG Jinyu LIU Gang ZHANG Guojun SUN Jun. LENGTH SCALE DEPENDENT DUCTILITY AND FRACTURE BEHAVIOR OF Cu/Nb NANOSTRUCTURED METALLIC MULTILAYERS[J]. 金属学报, 2011, 47(2): 246-250. [13] XU Zejian; LI Yulong; LI Na; LIU Yuanyong. EFFECT OF LOADING RATE ON MODE I DYNAMIC FRACTURE TOUGHNESS OF HIGH STRENGTH STEELS 40Cr AND 30CrMnSiNi2A[J]. 金属学报, 2006, 42(9): 965-970 . [14] WANG Yugui; QIAO Lijie; GAO Kewei; SU Yanjing; CHU Wuyang; WANG Zhonglin. Measurement of the Fracture Toughness and Critical Stress for Cracking in SnO2 Nanobelts Using Nanoindentation[J]. 金属学报, 2004, 40(6): 594-. [15] LIANG Yilong; LEI Min; ZHONG Shuhui; JIANG Shan (Guizhou University of Technology; Guiyang 550003)Correspondent: LIANG Yilong; associate professor; Tel. (0851)4818011; Fax: (0851)4818381. THE RELATIONSHIP BETWEEN FRACTURE TOUGHNESS AND NOTCH TOUGHNESS, TENSILE DUCTILITIES IN LATH MARTENSITE STEEL[J]. 金属学报, 1998, 34(9): 950-958. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed