Acta Metall Sin  1996, Vol. 32 Issue (1): 15-22    DOI:

Current Issue | Archive | Adv Search |

ON NONPROPORTIONAL CYCLIC PROPERTIES OF TYPE 316 STAINLESS STEELS

YANG Xianjie; GAO Qing; HE Guoqiu; CAI Lixun (Southwest Jiaotong University; Chengdu; 610031) (Manuscript received 1995-04-10; in revised form 1995-08-23)

YANG Xianjie; GAO Qing; HE Guoqiu; CAI Lixun (Southwest Jiaotong University; Chengdu; 610031) (Manuscript received 1995-04-10; in revised form 1995-08-23). ON NONPROPORTIONAL CYCLIC PROPERTIES OF TYPE 316 STAINLESS STEELS. Acta Metall Sin, 1996, 32(1): 15-22.

Abstract References Related Articles Recommended Metrics Download:  PDF(601KB)  Export:  BibTeX | EndNote (RIS)       Abstract  篈n experimental investigation was carried out of the cyclic properties of 316L and 316LN stainless steels subjected to uniaxial loading and biaxially nonproportional cyclic loadings. The properties of cyclic hardening, plastic flow and uniaxial kinematic hardening for the two kinds of steels were studied. It is shown that the properties depend not only on equivalent strain amplitude, but on strain path also. Some significant results were obtained.Correspondent: YANG Xianjie,(associate professor, Institute of Applied Mechanics, Southwest Jiaotong University, Chengdu 610031) Key words:  316L stainless steel      316LN stainless steel      nonproportional cyclic plasticity      plastic flow      cyclic hardening      Received:  18 January 1996      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I1/15 1KremplE,LuH．In:BrownMW,MillerKJ．Eds．,BiaxialandMultiaxialFatigue,London:MechanicalEngineeringPublications,1989:892TanakaE,MurakamiS,OokaM．JMechPhysSolids,1985;33:5593杨显杰．金属材料循环塑性和循环粘塑性本构关系研究,西南交通大学博士学位论文,19924杨显杰,高庆,孙训方．航空学报,1994;15:12615NingJ,ChenX．IntJSolidsStruct,1991;28:4036OhashiY,TanakaE,OokaM．ASMEJEngMatTech,1985;107:2867杨显杰,高庆,蔡力勋,陈旭,袁珩．金属学报,1995;31:A170 [1] YU Chenfan, ZHAO Congcong, ZHANG Zhefeng, LIU Wei. Tensile Properties of Selective Laser Melted 316L Stainless Steel[J]. 金属学报, 2020, 56(5): 683-692. [2] CHEN Lei, HAO Shuo, ZOU Zongyuan, HAN Shuting, ZHANG Rongqiang, GUO Baofeng. Mechanical Characteristics of TRIP-Assisted Duplex Stainless Steel Fe-19.6Cr-2Ni-2.9Mn-1.6Si During Cyclic Deformation[J]. 金属学报, 2019, 55(12): 1495-1502. [3] Dan LI, Yang LI, Rongsheng CHEN, Hongwei NI. Direct Synthesis of NiCo2O4 Nanoneedles and MoS2 Nanoflakes Grown on 316L Stainless Steel Meshes by Two Step Hydrothermal Method for HER[J]. 金属学报, 2018, 54(8): 1179-1186. [4] Tingguang LIU, Shuang XIA, Qin BAI, Bangxin ZHOU. Morphological Characteristics and Size Distributions of Three-Dimensional Grains and Grain Boundaries in 316L Stainless Steel[J]. 金属学报, 2018, 54(6): 868-876. [5] Tingguang LIU, Shuang XIA, Qin BAI, Bangxin ZHOU, Yonghao LU. Distribution Characteristics of Twin-Boundaries in Three-Dimensional Grain Boundary Network of 316L Stainless Steel[J]. 金属学报, 2018, 54(10): 1377-1386. [6] Shu GUO,En-Hou HAN,Haitao WANG,Zhiming ZHANG,Jianqiu WANG. Life Prediction for Stress Corrosion Behavior of 316L Stainless Steel Elbow of Nuclear Power Plant[J]. 金属学报, 2017, 53(4): 455-464. [7] Guanglu MA, Xinyu CUI, Yanfang SHEN, CINCA Nuria, M. GUILEMANY Josep, Tianying XIONG. INFLUENCE OF SUBSTRATE MECHANICAL PROPER-TIES ON DEPOSITION BEHAVIOUR OF 316L STAINLESS STEEL POWDER[J]. 金属学报, 2016, 52(12): 1610-1618. [8] LIU Xiahe, WU Xinqiang, HAN En-hou. EFFECTS OF TEMPERATURE ON LECTROCHEMICAL CORROSION OF DOMESTIC NUCLEAR-GRADE 316L STAINLESS STEEL IN Zn-INJECTED AQUEOUS ENVIRONMENT[J]. 金属学报, 2014, 50(1): 64-70. [9] ZHANG Litao,WANG Jianqiu. STRESS CORROSION CRACK PROPAGATION BEHAVIOR OF DOMESTIC FORGED NUCLEAR GRADE 316L STAINLESS STEEL IN HIGH TEMPERATURE AND HIGH PRESSURE WATER[J]. 金属学报, 2013, 49(8): 911-916. [10] LA Peiqing, MENG Qian, YAO Liang, ZHOU Maoxiong, Wei Yupeng. EFFECTS OF Al ELEMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOT-ROLLED 316L STAINLESS STEEL[J]. 金属学报, 2013, 49(6): 739-744. [11] LIU Guangzhou WANG Jianming ZHANG Jianqing CAO Chunan. EFFECT OF ELECTROLYTIC TREATMENT OF BALLAST WATER ON THE CORROSION BEHAVIOR OF 316L STAINLESS STEEL[J]. 金属学报, 2011, 47(12): 1600-1604. [12] SHI Yongjuan REN Yibin ZHANG Bingchun YANG Ke. THE EFFECT OF PASSIVATION ON THE HAEMOCOMPATIBILITY OF 316L STAINLESS STEEL[J]. 金属学报, 2011, 47(12): 1575-1580. [13] FANG Xinxian BAI Yunqiang WANG Zhangzhong. EROSION CORROSION BEHAVIOUR OF J4 STAINLESS STEEL AND ELECTROLESS PLATING COATINGS OF Ni–P AND Ni–Cu–P IN LIQUID–SOLID TWO–PHASE FLOW[J]. 金属学报, 2010, 46(2): 239-244. [14] SONG Renbo XIANG Jianying HOU Dongpo REN Peidong. BEHAVIOR AND MECHANISM OF HOT WORK-HARDENING FOR 316L STAINLESS STEEL[J]. 金属学报, 2010, 46(1): 57-61. [15] JIANG Huifeng CHEN Xuedong FAN Zhichao DONG Jie JIANG Heng LU Shouxiang. EFFECT OF DYNAMIC STRAIN AGING ON FATIGUE--CREEP BEHAVIOR OF 316L AUSTENITIC STAINLESS STEEL[J]. 金属学报, 2009, 45(3): 326-330. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed