EFFECTS OF SPUTTERING PARAMETER ON THE MICROSTRUCTURE OF Ti--6Al--4V COATING ON SiC FIBRE

Acta Metall Sin

2004, Vol. 40

Issue (4): 359-362 DOI:

Research Articles

Current Issue | Archive | Adv Search

EFFECTS OF SPUTTERING PARAMETER ON THE MICROSTRUCTURE OF Ti--6Al--4V COATING ON SiC FIBRE

WANG Yumin; FU Yuechun; SHI Nanlin; ZHANG Dezhi; YANG Rui

Institute of Metal Research; The Chinese Academy of Sciences; Shenyang 110016

Cite this article:

WANG Yumin; FU Yuechun; SHI Nanlin; ZHANG Dezhi; YANG Rui. EFFECTS OF SPUTTERING PARAMETER ON THE MICROSTRUCTURE OF Ti--6Al--4V COATING ON SiC FIBRE. Acta Metall Sin, 2004, 40(4): 359-362 .

Download:

PDF(241KB)
Export: BibTeX | EndNote (RIS)

Abstract The effects of sputtering parameters on the microstructure of Ti--6Al--4V coating on SiC(f) prepared by magnetron sputtering were studied. The results show that the deposition rate is related to the working pressure at a given power density. The morphology of the deposited layer and its binding with the fibre are dependent on temperature. The composition of the coat is close to Ti--6Al--4V, and is uniform throughout the thickness of the coat. The deposited layer consists of crystallites with nonequilibrium hcp structure with grain size of 20---50 nm. The interface between SiC fibre and Ti--6Al--4V coating was investigated by scanning electron microcopy and energy dispersive X--ray spectroscopy. The examination reveals no chemical reaction at the fibre--coat interface which is in nature a sharp interface formed by bonding of the two substances.

Key words: titanium matrix composite magnetron sputtering SiC fibre

Received: 24 February 2003

ZTFLH:

TG146.2

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	WANG Yumin
	FU Yuechun
	SHI Nanlin
	ZHANG Dezhi
	YANG Rui

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2004/V40/I4/359

[1] Doychak J. JOM, 1992; 44(6) : 46
[2] GUO Z X, Derby B. Prog Mater Sci, 1995; 39: 411
[3] Das G. Metall Trans, 1990; 21A: 1571
[4] Subramanian P R, Krishnamurthy S, Keller S T, Mendi-ratta M G. Mater Sci Eng, 1988; 244A: 1
[5] Tang W Z. Principles, Technology and Application of ThinFilm Materials. 1st ed., Beijing: Metallurgy IndustryPress, 1998(唐伟忠.薄膜材料制备原理、技术及应用,第1版.北京:冶金工业出版社,1998)
[6] Kunze J M, Wadley H N G. Mater Sci Eng, 1998; 244A: 138

[1]	HUANG Ding, QIAO Yanxin, YANG Lanlan, WANG Jinlong, CHEN Minghui, ZHU Shenglong, WANG Fuhui. Effect of Shot Peening of Substrate Surface on Cyclic Oxidation Behavior of Sputtered Nanocrystalline Coating[J]. 金属学报, 2023, 59(5): 668-678.
[2]	CHEN Run, WANG Shuai, AN Qi, ZHANG Rui, LIU Wenqi, HUANG Lujun, GENG Lin. Effect of Hot Extrusion and Heat Treatment on the Microstructure and Tensile Properties of Network Structured TiBw/TC18 Composites[J]. 金属学报, 2022, 58(11): 1478-1488.
[3]	CAO Qingping, LV Linbo, WANG Xiaodong, JIANG Jianzhong. Magnetron Sputtering Metal Glass Film Preparation and the “Specimen Size Effect” of the Mechanical Property[J]. 金属学报, 2021, 57(4): 473-490.
[4]	WANG Chao, ZHANG Xu, WANG Yumin, YANG Qing, YANG Lina, ZHANG Guoxing, WU Ying, KONG Xu, YANG Rui. Mechanisms of Interfacial Reaction and Matrix Phase Transition in SiC_f/Ti65 Composites[J]. 金属学报, 2020, 56(9): 1275-1285.
[5]	LIU Yanmei, WANG Tiegang, GUO Yuyao, KE Peiling, MENG Deqiang, ZHANG Jifu. Design, Preparation and Properties of Ti-B-N Nanocomposite Coatings[J]. 金属学报, 2020, 56(11): 1521-1529.
[6]	Wentao LI,Zhenyu WANG,Dong ZHANG,Jianguo PAN,Peiling KE,Aiying WANG. Preparation of Ti₂AlC Coating by the Combination of a Hybrid Cathode Arc/Magnetron Sputtering with Post-Annealing[J]. 金属学报, 2019, 55(5): 647-656.
[7]	Houpu WU,Xiubo TIAN,Xinyu ZHANG,Chunzhi GONG. Discharge Characteristics of Novel Dual-Pulse HiPIMS and Deposition of CrN Films with High Deposition Rate[J]. 金属学报, 2019, 55(3): 299-307.
[8]	Shasha YANG,Feng YANG,Minghui CHEN,Yunsong NIU,Shenglong ZHU,Fuhui WANG. Effect of Nitrogen Doping on Microstructure and Wear Resistance of Tantalum Coatings Deposited by Direct Current Magnetron Sputtering[J]. 金属学报, 2019, 55(3): 308-316.
[9]	Huiying SHI, Chao YANG, Bailing JIANG, Bei HUANG, Di WANG. Influences of Target Peak Current Density on the Microstructure and Mechanical Properties of TiN Films Deposited by Dual Pulsed Power Magnetron Sputtering[J]. 金属学报, 2018, 54(6): 927-934.
[10]	Jialin LIU, Yumin WANG, Guoxing ZHANG, Xu ZHANG, Lina YANG, Qing YANG, Rui YANG. Research on Single SiC Fiber Reinforced TC17 CompositesUnder Transverse Tension[J]. 金属学报, 2018, 54(12): 1809-1817.
[11]	Baiyang LOU,Yuxing WANG. EFFECTS OF Mo CONTENT ON THE MICRO-STRUCTURE AND TRIBOLOGICAL PROPERTIES OF CrMoAlN FILMS[J]. 金属学报, 2016, 52(6): 727-733.
[12]	Xudong SUI,Guojian LI,Qiang WANG,Xuesi QIN,Xiangkui ZHOU,Kai WANG,Lijian ZUO. PREPARATION OF Ti_1-_xAl_xN COATING IN CUTTING TITANIUM ALLOY AND ITS CUTTING PERFORMANCE[J]. 金属学报, 2016, 52(6): 741-746.
[13]	Yumin WANG, Guoxing ZHANG, Xu ZHANG, Qing YANG, Lina YANG, Rui YANG. ADVANCES IN SiC FIBER REINFORCED TITANIUM MATRIX COMPOSITES[J]. 金属学报, 2016, 52(10): 1153-1170.
[14]	Xu ZHANG, Yumin WANG, Qing YANG, Jiafeng LEI, Rui YANG. STUDY ON TENSILE BEHAVIOR OF SiC_f/TC17 COMPOSITES[J]. 金属学报, 2015, 51(9): 1025-1037.
[15]	QI Dongli, LEI Hao, FAN Di, PEI Zhiliang, GONG Jun, SUN Chao. EFFECT OF Mo CONTENT ON THE MICROSTRUC-TURE AND PROPERTIES OF CrMoN COMPOSITE COATINGS[J]. 金属学报, 2015, 51(3): 371-377.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed