Please wait a minute...
Acta Metall Sin  1996, Vol. 32 Issue (6): 663-668    DOI:
Current Issue | Archive | Adv Search |
CHANGE OF TEXTURE IN A SiC_w/LD2 COMPOSITE DURING SUPERPLASTIC DEFORMATION
GU Wanli; WANG Dezun; YAO Zhongkai (Harbin Institute of Technology; Harbin 150001)
Cite this article: 

GU Wanli; WANG Dezun; YAO Zhongkai (Harbin Institute of Technology; Harbin 150001). CHANGE OF TEXTURE IN A SiC_w/LD2 COMPOSITE DURING SUPERPLASTIC DEFORMATION. Acta Metall Sin, 1996, 32(6): 663-668.

Download:  PDF(390KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  SiC_2 / LD_2 compoiste has been fabricated by using squeeze casting method and then hot extruded at 743 K and the estruded ratio is 1:22. The superplastic tensile tests were carried out in the temperature range from 773 K to 853 K and in the strain rate range from 8.33×10~(-4) s~(-1) to 8.33×10~(-3)s~(-1) A maximum elongation of 280% occured at a strain rate of 2×10~(-3) s~(-1) at 843 K. The texture of the composite has been studied in two directions by means of anti-pole figure. The results manifest that the texture of metal matrix diffuses during the superplastic deformation and the new recrystallized texture emerges at the beginning of deformation. The recrystallized texture diffuses with the progress of elongation and is similar to the original texture. This is related to the confused rotation of grains. The whiskers will rotate by the means of θrotation
Key words:  SiC_2      LD2      composite      superplasticity      texture     
Received:  18 June 1996     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I6/663

1MuYehWu.ScrMetall.1984;18:7732NiehTG.MaterSciEng,1992;A147:1293RidleyN.MaterSciTechnol;1990;6:11454WadsworthJ.MaterSciEng,1993;A166:975MabuchiM.MaterSciEng,1992;A156:L96Gonzalez-DoncelG.CompositesSciTechnol,1989;35:1057陈浦泉.组织超塑性.哈尔滨:哈尔滨工业大学出版社,1988:308Takumi.MetallTrans,1992;33:3749NiehTG.ScrMetall,1986;20:177110NiehTG.ScrMetallMater,1992;26:703
[1] CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074.
[2] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.
[3] MA Zongyi, XIAO Bolv, ZHANG Junfan, ZHU Shize, WANG Dong. Overview of Research and Development for Aluminum Matrix Composites Driven by Aerospace Equipment Demand[J]. 金属学报, 2023, 59(4): 457-466.
[4] MA Guonan, ZHU Shize, WANG Dong, XIAO Bolv, MA Zongyi. Aging Behaviors and Mechanical Properties of SiC/Al-Zn-Mg-Cu Composites[J]. 金属学报, 2023, 59(12): 1655-1664.
[5] LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447.
[6] JIANG Jiang, HAO Shijie, JIANG Daqiang, GUO Fangmin, REN Yang, CUI Lishan. Quasi-Linear Superelasticity Deformation in an In Situ NiTi-Nb Composite[J]. 金属学报, 2023, 59(11): 1419-1427.
[7] SHEN Yingying, ZHANG Guoxing, JIA Qing, WANG Yumin, CUI Yuyou, YANG Rui. Interfacial Reaction and Thermal Stability of the SiCf/TiAl Composites[J]. 金属学报, 2022, 58(9): 1150-1158.
[8] GU Ruicheng, ZHANG Jian, ZHANG Mingyang, LIU Yanyan, WANG Shaogang, JIAO Da, LIU Zengqian, ZHANG Zhefeng. Fabrication of Mg-Based Composites Reinforced by SiC Whisker Scaffolds with Three-Dimensional Interpenetrating-Phase Architecture and Their Mechanical Properties[J]. 金属学报, 2022, 58(7): 857-867.
[9] ZHENG Shijian, YAN Zhe, KONG Xiangfei, ZHANG Ruifeng. Interface Modifications on Strength and Plasticity of Nanolayered Metallic Composites[J]. 金属学报, 2022, 58(6): 709-725.
[10] PAN Chengcheng, ZHANG Xiang, YANG Fan, XIA Dahai, HE Chunnian, HU Wenbin. Corrosion and Cavitation Erosion Behavior of GLNN/Cu Composite in Simulated Seawater[J]. 金属学报, 2022, 58(5): 599-609.
[11] WANG Haowei, ZHAO Dechao, WANG Mingliang. A Review of the Corrosion Protection Technology on In SituTiB2/Al Composites[J]. 金属学报, 2022, 58(4): 428-443.
[12] ZHANG Lei, SHI Tao, HUANG Huogen, ZHANG Pei, ZHANG Pengguo, WU Min, FA Tao. Phase Separation and Solidification Sequence of Uranium-Based Amorphous Composites[J]. 金属学报, 2022, 58(2): 225-230.
[13] JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556.
[14] CHEN Run, WANG Shuai, AN Qi, ZHANG Rui, LIU Wenqi, HUANG Lujun, GENG Lin. Effect of Hot Extrusion and Heat Treatment on the Microstructure and Tensile Properties of Network Structured TiBw/TC18 Composites[J]. 金属学报, 2022, 58(11): 1478-1488.
[15] FAN Genlian, GUO Zhiqi, TAN Zhanqiu, LI Zhiqiang. Architecture Design Strategies and Strengthening-Toughening Mechanisms of Metal Matrix Composites[J]. 金属学报, 2022, 58(11): 1416-1426.
No Suggested Reading articles found!