Acta Metall Sin  1996, Vol. 32 Issue (6): 653-657    DOI:

Current Issue | Archive | Adv Search |

APPLICATION OF H08Mn2SiA STEEL WELDING WIRE TO JOIN OF COPPER AND STEEL

WANG Kehong; XU Yuelan; WANG Jianping; LI Hongmou (Nanjing University of Science and Technology; Nanjing 210094)

WANG Kehong; XU Yuelan; WANG Jianping; LI Hongmou (Nanjing University of Science and Technology; Nanjing 210094). APPLICATION OF H08Mn2SiA STEEL WELDING WIRE TO JOIN OF COPPER AND STEEL. Acta Metall Sin, 1996, 32(6): 653-657.

Abstract References Related Articles Recommended Metrics Download:  PDF(449KB)  Export:  BibTeX | EndNote (RIS)       Abstract  H08Mn2SiA welding wire was successfully used to joint pure Cu and low carbon steel. Energy dispersive X-ray analysis shows that there is a Fe containing transitional zone of which the width is about few hundreds micron. No thermal cracks and other defects were observed in seam and the tensile strength of seam reached 200 MPa. Key words:  H08Mn2SiA welding wire      Cu      low carbon steel      weld      Received:  18 June 1996      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I6/653 1AmericanSocietyforMetals,包芳涵等译．金属手册,第六卷第九版,北京:机械工业出版社,1994:5782CM著,邸斌,刘中青译．有色金属焊接手册．北京:铁道出版社,1988:3183KearnsWH．Weldinghandbook．Vo1．47thedMiami:AmericanWeldingSociety,1982:5334刘中青,邸斌．异种材料的焊接,北京:科学出版社,1990:2315武春芝,刘俊强,叶文太,焊接学报,1990;(4):2250 [1] CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074. [2] MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086. [3] WANG Zongpu, WANG Weiguo, Rohrer Gregory S, CHEN Song, HONG Lihua, LIN Yan, FENG Xiaozheng, REN Shuai, ZHOU Bangxin. {111}/{111} Near Singular Boundaries in an Al-Zn-Mg-Cu Alloy Recrystallized After Rolling at Different Temperatures[J]. 金属学报, 2023, 59(7): 947-960. [4] WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776. [5] LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667. [6] WANG Hanyu, LI Cai, ZHAO Can, ZENG Tao, WANG Zumin, HUANG Yuan. Direct Alloying of Immiscible Tungsten and Copper Based on Nano Active Structure and Its Thermodynamic Mechanism[J]. 金属学报, 2023, 59(5): 679-692. [7] WAN Tao, CHENG Zhao, LU Lei. Effect of Component Proportion on Mechanical Behaviors of Laminated Nanotwinned Cu[J]. 金属学报, 2023, 59(4): 567-576. [8] XU Linjie, LIU Hui, REN Ling, YANG Ke. Effect of Cu on In-Stent Restenosis and Corrosion Resistance of Ni-Ti Alloy[J]. 金属学报, 2023, 59(4): 577-584. [9] ZHANG Zhefeng, LI Keqiang, CAI Tuo, LI Peng, ZHANG Zhenjun, LIU Rui, YANG Jinbo, ZHANG Peng. Effects of Stacking Fault Energy on the Deformation Mechanisms and Mechanical Properties of Face-Centered Cubic Metals[J]. 金属学报, 2023, 59(4): 467-477. [10] HAN Weizhong, LU Yan, ZHANG Yuheng. Mechanism of Ductile-to-Brittle Transition in Body-Centered-Cubic Metals：A Brief Review[J]. 金属学报, 2023, 59(3): 335-348. [11] WANG Chongyang, HAN Shiwei, XIE Feng, HU Long, DENG Dean. Influence of Solid-State Phase Transformation and Softening Effect on Welding Residual Stress of Ultra-High Strength Steel[J]. 金属学报, 2023, 59(12): 1613-1623. [12] GONG Xiangpeng, WU Cuilan, LUO Shifang, SHEN Ruohan, YAN Jun. Effect of Natural Aging on Artificial Aging of an Al-2.95Cu-1.55Li-0.57Mg-0.18Zr Alloy at 160oC[J]. 金属学报, 2023, 59(11): 1428-1438. [13] PENG Zhiqiang, LIU Qian, GUO Dongwei, ZENG Zihang, CAO Jianghai, HOU Zibing. Independent Change Law of Mold Heat Transfer in Continuous Casting Based on Big Data Mining[J]. 金属学报, 2023, 59(10): 1389-1400. [14] HOU Xuru, ZHAO Lin, REN Shubin, PENG Yun, MA Chengyong, TIAN Zhiling. Effect of Heat Input on Microstructure and Mechanical Properties of Marine High Strength Steel Fabricated by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(10): 1311-1323. [15] FENG Di, ZHU Tian, ZANG Qianhao, LEE Yunsoo, FAN Xi, ZHANG Hao. Solution Behavior of Spray-Formed Hypereutectic AlSiCuMg Alloy[J]. 金属学报, 2022, 58(9): 1129-1140. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed