Acta Metall Sin  1995, Vol. 31 Issue (17): 233-237    DOI:

Current Issue | Archive | Adv Search |

EFFECT OF GRAIN SIZE ON TEXTURE AND STRESS ANALYSIS FOR CUBIC MATERIALS

YU Ligen; (Research institute for Strength of Metals; Xi'an Jiaotong University; Hi'an 710049) XU Kewei; HE Jiawen; GU Haicheng (Stale Key Laboratory for Mechanical Behaviour of Materials; Xi'an Jiaotong University; Xi'an 710049)

YU Ligen; (Research institute for Strength of Metals; Xi'an Jiaotong University; Hi'an 710049) XU Kewei; HE Jiawen; GU Haicheng (Stale Key Laboratory for Mechanical Behaviour of Materials; Xi'an Jiaotong University; Xi'an 710049). EFFECT OF GRAIN SIZE ON TEXTURE AND STRESS ANALYSIS FOR CUBIC MATERIALS. Acta Metall Sin, 1995, 31(17): 233-237.

Abstract References Related Articles Recommended Metrics Download:  PDF(345KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The minimum grain size determined by the resolution of X-ray texture analysis and the maximum grain size for linear stress measurement curve were calculated for the quasi-isotropic polycrystal. The results show that in certain grain size range, to which texture analysis are insensitive, stress measurement curve can still be nonlinear. The critical grain sizes for iron material are given to show that for certain grain sizes, when d-sin~2Ψ curve is nonlinear, the effect of grain size should be taken into consideration together with that of texture. Key words:  X-ray stress measurement      texture      orientation distribution function(ODF)compliance      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1995/V31/I17/233 1李家宝．全国材料强度及残余应力学术会议论文集,宜昌,1994:122H,HaukV．ZMetallk,1978;69:4103BehnkenH．HaukV．ZMetallk,1991;82:1514EckhardtM,RuppersbergH．TexturesMicrostruc,1988;8//9:6795CullityBD．ElementsofX-rayDiffaction．2nded,Reading,Mass,USA:Addison-Wesley,1978:1306陈纲,廖理机编．晶体物理学基础．北京:科学出版社,1992:157NoyanIC．CohenJB．ResidualStress．NewYork:Springer-Verlag,1987:1348理学电机株式会社分析中心编,浙江大学分析测试中心译．X射线衍射手册．日本:理学电机株式会社,1987:附录3 [1] CHANG Songtao, ZHANG Fang, SHA Yuhui, ZUO Liang. Recrystallization Texture Competition Mediated by Segregation Element in Body-Centered Cubic Metals[J]. 金属学报, 2023, 59(8): 1065-1074. [2] LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447. [3] JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556. [4] YANG Ping, WANG Jinhua, MA Dandan, PANG Shufang, CUI Feng'e. Influences of Composition on the Transformation-Controlled {100} Textures in High Silicon Electrical Steels Prepared by Mn-Removal Vacuum Annealing[J]. 金属学报, 2022, 58(10): 1261-1270. [5] DING Ning, WANG Yunfeng, LIU Ke, ZHU Xunming, LI Shubo, DU Wenbo. Microstructure, Texture, and Mechanical Properties of Mg-8Gd-1Er-0.5Zr Alloy by Multi-Directional Forging at High Strain Rate[J]. 金属学报, 2021, 57(8): 1000-1008. [6] YAN Mengqi, CHEN Liquan, YANG Ping, HUANG Lijun, TONG Jianbo, LI Huanfeng, GUO Pengda. Effect of Hot Deformation Parameters on the Evolution of Microstructure and Texture of β Phase in TC18 Titanium Alloy[J]. 金属学报, 2021, 57(7): 880-890. [7] ZUO Liang, LI Zongbin, YAN Haile, YANG Bo, ZHAO Xiang. Texturation and Functional Behaviors of Polycrystalline Ni-Mn-X Phase Transformation Alloys[J]. 金属学报, 2021, 57(11): 1396-1415. [8] XU Zhanyi, SHA Yuhui, ZHANG Fang, ZHANG Huabing, LI Guobao, CHU Shuangjie, ZUO Liang. Orientation Selection Behavior During Secondary Recrystallization in Grain-Oriented Silicon Steel[J]. 金属学报, 2020, 56(8): 1067-1074. [9] YU Lei,LUO Haiwen. Effect of Partial Recrystallization Annealing on Magnetic Properties and Mechanical Properties of Non-Oriented Silicon Steel[J]. 金属学报, 2020, 56(3): 291-300. [10] CHENG Chao,CHEN Zhiyong,QIN Xushan,LIU Jianrong,WANG Qingjiang. Microstructure, Texture and Mechanical Property ofTA32 Titanium Alloy Thick Plate[J]. 金属学报, 2020, 56(2): 193-202. [11] DU Zijie, LI Wenyuan, LIU Jianrong, SUO Hongbo, WANG Qingjiang. Study on the Uniformity of Structure and Mechanical Properties of TC4-DT Alloy Deposited by CMT Process[J]. 金属学报, 2020, 56(12): 1667-1680. [12] Xin LI,Yuecheng DONG,Zhenhua DAN,Hui CHANG,Zhigang FANG,Yanhua GUO. Corrosion Behavior of Ultrafine Grained Pure Ti Processed by Equal Channel Angular Pressing[J]. 金属学报, 2019, 55(8): 967-975. [13] Liping DENG,Kaixuan CUI,Bingshu WANG,Hongliang XIANG,Qiang LI. Microstructure and Texture Evolution of AZ31 Mg Alloy Processed by Multi-Pass Compressing Under Room Temperature[J]. 金属学报, 2019, 55(8): 976-986. [14] Zheng LIU,Jianrong LIU,Zibo ZHAO,Lei WANG,Qingjiang WANG,Rui YANG. Microstructure and Tensile Property of TC4 Alloy Produced via Electron Beam Rapid Manufacturing[J]. 金属学报, 2019, 55(6): 692-700. [15] Houlong LIU,Mingyu MA,Lingling LIU,Liangliang WEI,Liqing CHEN. Effect of Hot Band Annealing Processes on Texture and Formability of 19Cr2Mo1W Ferritic Stainless Steel[J]. 金属学报, 2019, 55(5): 566-574. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed