|
|
CORROSION BEHAVIOR OF COPPER ALLOYS IN DEEP OCEAN ENVIRONMENT OF SOUTH CHINA SEA |
SUN Feilong, LI Xiaogang, LU Lin, WAN Hongxia, DU Cuiwei, LIU Zhiyong |
Corrosion and Protection Center, University of Science and Technology Beijing, Beijing 100083 |
|
Cite this article:
SUN Feilong, LI Xiaogang, LU Lin, WAN Hongxia, DU Cuiwei, LIU Zhiyong. CORROSION BEHAVIOR OF COPPER ALLOYS IN DEEP OCEAN ENVIRONMENT OF SOUTH CHINA SEA. Acta Metall Sin, 2013, 49(10): 1211-1218.
|
Abstract The corrosion in deep ocean environment has been paied more and more attentions to the exploitation of marine resources. Different from shallow marine environments, deep ocean environments are specially characterized by high hydrostatic pressure, low temperature, variable dissolved oxygen content and pH value in deep ocean, etc.. So the corrosion behaviour of materials, such as ferrous and nonferrous metal and coatings, in deep ocean environments is different from that in shallow marine environments. A number of researches have been carried out to investigate the corrosion behaviour of metals in natural deep ocean in a few developed countries. Such researches, however, began until 2008 in South China Sea. In this work, the corrosion behavior of H62 brass, QAl9-2 and QSn6.5-0.1 bronze in 800 and 1200 m deep ocean environments of South China Sea was studied using field tests. The results indicated that the corrosion rates of copper alloys decreased in the following order: H62 (0.042 mm/a) > QSn6.5-0.1 (0.004-0.007 mm/a) > QAl9-2 (0.003 mm/a). The corrosion rate of H62 brass decreased linearly with the increase in depth. While the corrosion rates of QAl9-2 and QSn6.5-0.1 bronze decreased first and then increased with the increase in depth. The minimum value of corrosion rate occurred between 800-1200 m. The morphology and composition of corrosion products were investigated using SEM, EDS and XRD. The results demonstrated that the dezincification corrosion obeying solution-redeposition mechanism in H62 brass occurred. The corrosion products were composed of Cu, ZnO, Zn5(OH)8Cl2H2O and Cu(OH)2H2O. And the dealloying corrosion in QAl9-2 and QSn6.5-0.1 bronze occurred. The corrosion products of QAl9-2 bronze consist of Cu2O and CuCl2, and those of QSn6.5-0.1 bronze Cu2O, CuCl2 and Cu2Cl(OH)3.
|
Received: 28 March 2013
|
[1] David A, Shi X. Corros Sci, 2005; 47: 2335
[2] Zhou J L, Li X G, Cheng X Q, Dong C F, Du C W, Lu L. Corros Sci Prot Technol, 2010; 22: 47
(周建龙, 李晓刚, 程学群, 董超芳, 杜翠薇, 卢琳. 材料腐蚀与防护技术, 2010; 22: 47)
[3] Schumacher M. Sea Water Corrosion Handbook. New Jersey: Park Ridge, 1979: 150
[4] Dexter S C. Handbook of Oceanographic Engineering Materials. New York: Whiley-Interscience, 1979: 23
[5] Dexter S C. Corrosion, 1980; 36: 423
[6] Sparks C P, Cabillic J P, Schawann J C. J Energy Resour-Trans ASME, 1983; 105: 282
[7] Laque F L. Marine Corrosion. London: John Wiley and Sons Inc., 1975: 40
[8] Chandler K A. Marine and Offshore Corrosion (Marine Engineering Series). London: Butter worth, 1985: 72
[9] Warren A B. J Mar Res, 1982; 40: 823
[10] Sawant S S, Venkat K, Wagh A B. Indian J Technol, 1993; 31: 862
[11] Venkatesan R, Venkataswamy M A, Bhaskaran T A, Dwarakadasa E S, Ravindran M.Br Corros J, 2002; 37: 257
[12] Venkatesan R, Dwarakadasa E S, Ravindran M. Corros Prev Control, 2004; 51: 98
[13] Heiser J, Soo P. Corrosion of Barrier Materials in Seawater Environments.New York: Long Island, 1995: 23
[14] Fischer K P, Espelid B, Schei B. Corrosion 2001. Houston: NACE, 2001: Paper No.01013
[15] Fischer K P. Corrosion 99. Houston: NACE, 1999: Paper No.361
[16] Chen S, Hatt W, Wolfson S. Corrosion, 2003; 59: 721
[17] Akio K. Corros Sci, 2005; 47: 2361
[18] Mohammed R, Timothy J D. Int J Fatigue, 2008; 30: 2220
[19] Blundy R F, Shreir L L. Corros Sci, 1977; 17: 509
[20] Venkatesan R. PhD Dissertation, Indian Institute of Science, Bangalore, 2000
[21] Beccaria A M, Fiordiponti P, Mattogno G. Corros Sci, 1989; 29: 403
[22] Beccaria A M, Poggi G, Arfelli M, Mattogno G. Corros Sci, 1993; 34: 989
[23] Beccaria A M, Poggi G, Gingaud D, Castello P. Br Corros J, 1994; 29: 65
[24] Beccaria A M, Poggi G. Br Corros J, 1985; 20: 183
[25] Zhu X L, Li L Y, Xu J. Chin J Nonferrous Met, 1998; 8 (suppl 1): 210
(朱小龙, 林乐耘, 徐杰. 中国有色金属学报, 1998; 8(增刊1): 210)
[26] Langenegger E E, Robinson F P A. Corrosion, 1969; 25: 137
[27] Namboodhirl T K G, Chaudhary R S, Prakash B, Agrawal M K. Corros Sci, 1982; 22: 1037
[28] Li Y, Zhu Y L. Corros Prot, 2006; 27: 222
(李勇, 朱应禄. 腐蚀与防护, 2006; 27: 222)
[29] Kear G, Barker B D, Stokes K R, Walsh F C. Electrochim Acta, 2007; 52: 2343
[30] Strandberg H, Johansson L G. J Electrochem Soc, 1998; 145: 1093
[31] Nunea L, Reguera E, Corvo F, Gonzalez E, Vazquez C. Corros Sci, 2005; 47: 461 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|