Please wait a minute...
金属学报  1998, Vol. 34 Issue (11): 1153-1157    
  论文 本期目录 | 过刊浏览 |
钇和硅对Ni_3Al基IC6合金组织和性能的影响
韩雅芳;肖程波
北京航空材料研究院;;北京;100095;北京航空材料研究院;;北京;100095
EFFECT OF YTTRIUM AND SILICON ON MICROSTRUCTURE AND PROPERTIES OF Ni_3Al BASE ALLOY IC6
HAN Yafang;XIAO Chengbo (Beijing institute of Aeronautical Materials; Beliing 100095)
引用本文:

韩雅芳;肖程波. 钇和硅对Ni_3Al基IC6合金组织和性能的影响[J]. 金属学报, 1998, 34(11): 1153-1157.
, . EFFECT OF YTTRIUM AND SILICON ON MICROSTRUCTURE AND PROPERTIES OF Ni_3Al BASE ALLOY IC6[J]. Acta Metall Sin, 1998, 34(11): 1153-1157.

全文: PDF(1305 KB)  
摘要: 利用电子探针研究了不同含量Y和Si对定向凝固Ni3Al基合金IC6微观组织的影响,测定了合金的1100℃抗氧化性能、1100℃/80MPa持久性能、1100℃热疲劳性能以及各种温度下的瞬时性能,结果表明,加适量Y有利于提高IC6合金的高温抗氧化性能、持久性能和热疲劳性能,Si也有利于提高IC6合金的高温抗氧化性能,而对持久性能和热疲劳性能不利,Y和Si对IC6合金联的瞬时性能均无明显影响
关键词 Ni_3Al组织性能    
Abstract:The effect of different amounts of yttrium and silicon on the microstructure of directionally solidified Ni3Al base alloy IC6 was studied with electron probe microstructural analysis(EPMA). The oxidation resistance at 1100℃, stress rupture property under 1100℃ /80MPa, thermal fatigue property at 1100℃ and tensile properties at different temperatures were tested, the results show that the high temperature oxidation resistance, stress rupture property and thermal fatigue property of alloy IC6 are increased by adding proper amounts of yttrium. Silicon is beneficial to the high temperature oxidation resistance but harmful to the stress rupture property and thermal fatigue property. The addition of yttrium and silicon has no obvious influence on the tensile properties.
Key wordsNi_3Al    yttrium    silicon    microstructure    mechanical property
收稿日期: 1998-11-18     
基金资助:国家863计划资助!715-005-0020
1Han Y F,Xing Z P,Chaturvedi M C.In:Nathal M V et al eds,Structural Intermetallics,1997:713
2 Pfeil L B. U.K.Patent No.459848,1937
3Kuenzly J D,Douglass D L.Oxid Met,1974;8:139
4 Guo J T; Sun C, Li H, Lai W H, Tan M H,Wang S H.In:Guan H R et al eds,Proc Inter Symposiumon High Temperature Corrosion and Protection.Liaoning Science and Technology Press,1991;45
5王淑荷,郭建亭,李辉,孙超,谭明晖,赖万慧金属学报,1991;27: A433(Wang S H, Guo J T, Li H, Sun C, Tan M H, Lai W H Acta Metall Sin, 1991; 27: A433)
6 Miner R V, Lowell C E. NASA TN D— 7989; 1975
7 Santoro G J et al. NASA TN D- 6414, 1971
8 Lowell C E, Santoro G J. NASA TN D 6838; 19729 Lowed C E, Miner R V. NASA TM- X-68191, 1973
10 Eiselstein H L.Advances in the technology of Stainless Steels and Related Alloys,Disc Philadelpohia,ASTM,1965:78
11 Rizzo F J, Buzzanell J D.J Met, 1969; 21(10): 24
12肖程波,韩雅芳金属学报,1998;34:1158(Xia C B, Han Y F. Acta Metall Sin, 1998; 34: 1158)
13 Xiao C B,Han Y F. Proceedings of 3rd Intermational Workshop on Ordered Intermetawllic Alloys andComposites, 1998; to be published
[1] 马德新, 赵运兴, 徐维台, 王富. 重力对高温合金定向凝固组织的影响[J]. 金属学报, 2023, 59(9): 1279-1290.
[2] 王磊, 刘梦雅, 刘杨, 宋秀, 孟凡强. 镍基高温合金表面冲击强化机制及应用研究进展[J]. 金属学报, 2023, 59(9): 1173-1189.
[3] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[4] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124.
[5] 郑亮, 张强, 李周, 张国庆. /降氧过程对高温合金粉末表面特性和合金性能的影响:粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278.
[6] 张雷雷, 陈晶阳, 汤鑫, 肖程波, 张明军, 杨卿. K439B铸造高温合金800℃长期时效组织与性能演变[J]. 金属学报, 2023, 59(9): 1253-1264.
[7] 卢楠楠, 郭以沫, 杨树林, 梁静静, 周亦胄, 孙晓峰, 李金国. 激光增材修复单晶高温合金的热裂纹形成机制[J]. 金属学报, 2023, 59(9): 1243-1252.
[8] 陈礼清, 李兴, 赵阳, 王帅, 冯阳. 结构功能一体化高锰减振钢研究发展概况[J]. 金属学报, 2023, 59(8): 1015-1026.
[9] 刘兴军, 魏振帮, 卢勇, 韩佳甲, 施荣沛, 王翠萍. 新型钴基与Nb-Si基高温合金扩散动力学研究进展[J]. 金属学报, 2023, 59(8): 969-985.
[10] 刘伟, 陈婉琦, 马梦晗, 李恺伦. 聚变堆用W在等离子体作用下的辐照损伤行为研究进展[J]. 金属学报, 2023, 59(8): 986-1000.
[11] 丁桦, 张宇, 蔡明晖, 唐正友. 奥氏体基Fe-Mn-Al-C轻质钢的研究进展[J]. 金属学报, 2023, 59(8): 1027-1041.
[12] 李景仁, 谢东升, 张栋栋, 谢红波, 潘虎成, 任玉平, 秦高梧. 新型低合金化高强Mg-0.2Ce-0.2Ca合金挤压过程中的组织演变机理[J]. 金属学报, 2023, 59(8): 1087-1096.
[13] 司永礼, 薛金涛, 王幸福, 梁驹华, 史子木, 韩福生. Cr添加对孪生诱发塑性钢腐蚀行为的影响[J]. 金属学报, 2023, 59(7): 905-914.
[14] 袁江淮, 王振玉, 马冠水, 周广学, 程晓英, 汪爱英. Cr2AlC涂层相结构演变对力学性能的影响[J]. 金属学报, 2023, 59(7): 961-968.
[15] 孙蓉蓉, 姚美意, 王皓瑜, 张文怀, 胡丽娟, 仇云龙, 林晓冬, 谢耀平, 杨健, 董建新, 成国光. Fe22Cr5Al3Mo-xY合金在模拟LOCA下的高温蒸汽氧化行为[J]. 金属学报, 2023, 59(7): 915-925.