Please wait a minute...
金属学报  2006, Vol. 42 Issue (9): 942-946     
  论文 本期目录 | 过刊浏览 |
直流电流对一种镍基单晶高温合金 γ '相析出的影响
李应举;杨院生;冯小辉;张宇男;胡壮麒
中国科学院金属研究所
EFFECT OF DC ELECTRIC CURRENT ON THE PRECIPITATION OF γ '-PHASE IN A Ni-BASED SINGLE CRYSTAL SUPERALLOY
LI Yingju; YANG Yuansheng; FENG Xiaohui; ZHANG Yunan; HU Zhuangqi
中国科学院金属研究所
引用本文:

李应举; 杨院生; 冯小辉; 张宇男; 胡壮麒 . 直流电流对一种镍基单晶高温合金 γ '相析出的影响[J]. 金属学报, 2006, 42(9): 942-946 .
, , , , . EFFECT OF DC ELECTRIC CURRENT ON THE PRECIPITATION OF γ '-PHASE IN A Ni-BASED SINGLE CRYSTAL SUPERALLOY[J]. Acta Metall Sin, 2006, 42(9): 942-946 .

全文: PDF(538 KB)  
摘要: 研究了不同直流电流密度条件下一种镍基单晶高温合金中γ '相的析出行为. 合金经1250 ℃固溶4 h处理后,对其施加不同电流密度且以不同冷却方式进行冷却,考察直流电流对 γ '相析出的影响. 结果表明,合金在固溶处理后空冷时,随电流密度的增加, γ '相的尺寸和体积分数均增加,面密度减小;在相同的电流密度作用下,随着冷却速率的增加, 相尺寸和体积分数减小,面密度显著增加. 直流电流产生的电迁移效应和Joule热效应影响γ '相的析出过程,电迁移效应加速原子的扩散,对γ '相析出起促进作用;Joule热效应降低冷却速率,促进γ '相的长大.
关键词 镍基单晶高温合金γ'相析出直流电流    
Abstract:The effects of DC electric current on the precipitation of γ '-phase in a Ni-based single crystal superalloy were studied. Under the action of different current densities the superalloy was cooled at different cooling rates after solution heat treatment at 1250 ℃ for 4 h. The experiment results show that the size and volume fraction of γ '-phase increase with the increase of current density, while the planar density of γ '-phase decreases at air cooling; under the action of the same current density, the size and volume fraction of γ '-phase decrease and the planar density of γ '-phase increases with the increase of cooling rate. It is considered that the electromigration effect induced by the DC current accelerates the diffusion of atoms during γ '-phase precipitation, which enhances the precipitation of γ '-phase, and the Joule heat effect produced by the DC current reduces the cooling rate, which speeds up the growth of γ '-phase.
Key wordsNi-based single crystal superalloy    γ '-phase precipitation    DC electric current
收稿日期: 2006-02-28     
ZTFLH:  TG132.3  
[1]Caron P,Khan T.Aerosp Sci Technol,1999;3:513
[2]Higginbotham G J S.Mater Sci Technol,1986;2:442
[3]Nembach E,Schanzer S,Schroer W,Trinckauf K.Acta Metall,1987;35:1471
[4]Monajati H,Jahazi M,Bahrami R,Yue S.Mater Sci Eng,2004;A373:286
[5]Ahmed S,Bond R,McKannan E C.Adv Mater Processes,1991;140:30
[6]Ahmed S,McKannan E C.Mater Sci Technol,1994;10:941
[7]Yang Y S,Zhang Q S,Hu Z Q.In:Morris D G,Naka S,Caron P,eds.,Interraetallics and Superalloys,EUROMAT 99,Vol.10,Weinheim Germany:Wiley-vch,1999:34
[8]Yang Y S,Li W F,Wang Z Z,Hu Z Q.In:Hanada S,Zhong Z,Nam S W,Wright R N,eds.,4th Pacific Rim Int Conf on Advanced Materials and Processing,Vol.1,Tokyo:The Japan Institute of Metals,2001:345
[9]Pellissier G E,Purdy S M.ASTM STP 122,1972
[10]Kearseya R M,Beddoesa J C,Jonesb P,Au P.Intermetallics,2004;12:903
[11]Conrad H.Mater Sci Eng,2000;A287:227
[12]David U F.Scr Mater,1999;40;1215
[13]Bhowal P R,Wright E F,Raymond E L.Metall Trans,1990;21A;1709a
[1] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229.
[2] 冯强, 路松, 李文道, 张晓瑞, 李龙飞, 邹敏, 庄晓黎. γ' 相强化钴基高温合金成分设计与蠕变机理研究进展[J]. 金属学报, 2023, 59(9): 1125-1143.
[3] 卢毓华, 王海舟, 李冬玲, 付锐, 李福林, 石慧. 基于高通量场发射扫描电镜建立的高温合金 γ' 相定量统计表征方法[J]. 金属学报, 2023, 59(7): 841-854.
[4] 张子轩, 于金江, 刘金来. 镍基单晶高温合金DD432的持久性能各向异性[J]. 金属学报, 2023, 59(12): 1559-1567.
[5] 胡敏, 周生玉, 国京元, 胡明昊, 李冲, 李会军, 王祖敏, 刘永长. 多相Ni3Al基高温合金微区氧化行为[J]. 金属学报, 2023, 59(10): 1346-1354.
[6] 徐静辉, 李龙飞, 刘心刚, 李辉, 冯强. 热力耦合对一种第四代镍基单晶高温合金1100℃蠕变组织演变的影响[J]. 金属学报, 2021, 57(2): 205-214.
[7] 刘超, 姚志浩, 郭婧, 彭子超, 江河, 董建新. 粉末高温合金FGH4720Li在近服役温度下的组织演变规律[J]. 金属学报, 2021, 57(12): 1549-1558.
[8] 王世宏, 李健, 柴锋, 罗小兵, 杨才福, 苏航. 固溶温度对Fe-19Mn合金的γε相变和阻尼性能的影响[J]. 金属学报, 2020, 56(9): 1217-1226.
[9] 和思亮, 赵云松, 鲁凡, 张剑, 李龙飞, 冯强. 热等静压对铸态及固溶态第二代镍基单晶高温合金显微缺陷及持久性能的影响[J]. 金属学报, 2020, 56(9): 1195-1205.
[10] 刘先锋, 刘冬, 刘仁慈, 崔玉友, 杨锐. Ti-43.5Al-4Nb-1Mo-0.1B合金的包套热挤压组织与拉伸性能[J]. 金属学报, 2020, 56(7): 979-987.
[11] 王希,刘仁慈,曹如心,贾清,崔玉友,杨锐. 冷却速率对β凝固γ-TiAl合金硼化物和室温拉伸性能的影响[J]. 金属学报, 2020, 56(2): 203-211.
[12] 胡斌,李树索,裴延玲,宫声凯,徐惠彬. <111>取向小角偏离对一种镍基单晶高温合金蠕变性能的影响[J]. 金属学报, 2019, 55(9): 1204-1210.
[13] 马晋遥,王晋,赵云松,张剑,张跃飞,李吉学,张泽. 一种第二代镍基单晶高温合金1150 ℃原位拉伸断裂机制研究[J]. 金属学报, 2019, 55(8): 987-996.
[14] 唐文书,肖俊峰,李永君,张炯,高斯峰,南晴. 再热恢复处理对蠕变损伤定向凝固高温合金γ′相的影响[J]. 金属学报, 2019, 55(5): 601-610.
[15] 操发春, 吴航, 杨延格, 曹京宜, 张涛, 王福会. γ-APS接枝环氧树脂分子对环氧涂层/金属界面化学键合的研究[J]. 金属学报, 2019, 55(2): 238-248.