Please wait a minute...
金属学报  2010, Vol. 46 Issue (4): 418-422    DOI: 10.3724/SP.J.1037.2009.00800
  论文 本期目录 | 过刊浏览 |
用于描述奥氏体/马氏体界面的修正模型
程宁;郭正洪;孟庆平
上海交通大学材料科学与工程学院; 上海 200240
A MODIFIED MODEL USED TO DESCRIBE AUSTENITE/MARTENSITE INTERFACE
CHENG Ning; GUO Zhenghong; MENG Qingping
School of Materials Science and Engineering; Shanghai Jiao Tong University; Shanghai 200240
引用本文:

程宁 郭正洪 孟庆平. 用于描述奥氏体/马氏体界面的修正模型[J]. 金属学报, 2010, 46(4): 418-422.
, , . A MODIFIED MODEL USED TO DESCRIBE AUSTENITE/MARTENSITE INTERFACE[J]. Acta Metall Sin, 2010, 46(4): 418-422.

全文: PDF(451 KB)  
摘要: 

在择优态存在的前提下, 以修正Landau多项式描述奥氏体/马氏体的界面特征. 以母相弹性模量、择优态能量和马氏体相变驱动力为参数, 利用Ginzburg-Landau 理论计算了奥氏体/马氏体的界面结构及相关性质. 结果表明, 奥氏体/马氏体界面存在一个序参量变化缓慢的平台, 这个平台对应于点阵结构既非奥氏体也非马氏体的过渡区域. 通过对奥氏体/马氏体界面宽度和界面能的计算, 表明本模型可很好地解释一些实验中观察到的现象.

关键词 马氏体Landau理论界面    
Abstract

A modified Landau polynomial was proposed to describe the structure features of austenite/martensite interface under the existence of an intrfacial preferrd state. When the elastic modulus of austenite, the energy of preferred state and thdriving force for martensitic transformation were selected as the variables, a transitional platform with a slow change in order parameter, i.e. scaled shear strain whose structure is neither austenite nor martensite, was found using Ginzburg–Landau theory. The energ and width of austenite/martensite interface were calculated. Based on these calculated results, some experimental phenomena during martensitic transformatin can be explaned perfectly. It is demonstrated that the current model is more universal.

Key wordsmartensite    Landau theory    interface
收稿日期: 2009-11-30     
基金资助:

国家自然科学基金项目50471014和U0774011资助

作者简介: 程宁, 男, 1984年生, 硕士生

[1] Xu Z Y. Martensitic Transformation and Martensite. 2nd Ed., Beijing: Science Press, 1999: 725
(徐祖耀. 马氏体相变与马氏体. 第二版. 北京: 科学出版社. 1999: 725)
[2] Wechsler M. Trans AIME, 1953; 197: 1503
[3] Bowles J S, Mackenzie J K. Acta Metall, 1954; 2: 129
[4] Ma X, Pond R C. J Nucl Mater, 2007; 361: 313
[5] Pond R C, Ma X, Hirth J P. J Mater Sci, 2008; 43: 3881
[6] Pond R C, Celotto S, Hirth J P. Acta Mater, 2003; 51: 5385
[7] Pond R C, Ma X, Chai Y W, Hirth J P. In: Nabarro F R N, Hirth J P, eds., Dislocations in Solids, Vol.13, Amsterdam: Elsevier, 2007: 225
[8] Zhang W Z, Wu J. Mater Sci Eng, 2006; A438: 118
[9] Kajiwara S, Ogawa K, ikuchi T, Philos Mag Lett, 1996; 74: 405
[10] Ogawa K, Kajiwara S. Philos Mag, 2004; 84: 2919
[11] Ogawa K, Kajiwara S. Mater Sci Eng, 2006; A438–440(spec): 90
[12] Falk F. Z Phys, 1983; 51B: 177
[13] Jacobs A E. Phys Rev, 1985; 31B: 5984
[14] Xu Z Y. The Principles of Phase Transformation. Beijing: Science Press, 1988: 472
(徐祖耀. 相变原理. 北京: 科学出版社, 1988: 472)
[15] Falk F. Acta Metall, 1980; 28: 1773
[16] Olson G B, Cohen M. In: Aaronson H I, Laughlin D E, Sekerka R F, Wayman C W, eds., Proceedings of International Conference on Solid to Solid Phase Transformation. Pittsburg: AIME, 1982: 1145
[17] Nakanishi N. Prog Mater Sci, 1980; 24: 143
[18] Prasetyo A, Reynaud F, Warlimont H. Acta Metall, 1976; 24: 1009
[19] Delaey L, van Paemel J, Struyve T. Scr Mater, 1972; 6: 507
[20] Kashida S, Kaga H. J Phys Soc Jpn, 1977; 42: 499
[21] Hasiguti R, Iwasaki K. J Appl Phys, 1968; 39: 2182
[22] Salama K, Alers G. J Appl Phys, 1968; 39: 4857
[23] Hausch G, Warlimont H. Acta Metall, 1973; 21: 401
[24] Cahn J W, Hilliard J E. J Chem Phys, 1958; 28: 258
[25] Muto S, Oshima R, Fujita F E. Acta Mater, 1990; 38: 685
[26] Shapiro S M, Yang B X, Shirane G, Noda Y, Tanner L E. Phys Rev Lett, 1989; 62: 1298
[27] Kaufman L P, Cohen M. Prog Met Phys, 1958; 7: 165
[28] Muto S, Takeda S, Oshima R, Fujita F E. J Phys, 1989; 1: 9971

[1] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[2] 王宗谱, 王卫国, Rohrer Gregory S, 陈松, 洪丽华, 林燕, 冯小铮, 任帅, 周邦新. 不同温度轧制Al-Zn-Mg-Cu合金再结晶后的{111}/{111}近奇异晶界[J]. 金属学报, 2023, 59(7): 947-960.
[3] 王周头, 袁清, 张庆枭, 刘升, 徐光. 冷轧中碳梯度马氏体钢的组织与力学性能[J]. 金属学报, 2023, 59(6): 821-828.
[4] 王福容, 张永梅, 柏国宁, 郭庆伟, 赵宇宏. Al掺杂Mg/Mg2Sn合金界面的第一性原理计算[J]. 金属学报, 2023, 59(6): 812-820.
[5] 王滨, 牛梦超, 王威, 姜涛, 栾军华, 杨柯. Cu马氏体时效不锈钢的组织与强韧性[J]. 金属学报, 2023, 59(5): 636-646.
[6] 吴欣强, 戎利建, 谭季波, 陈胜虎, 胡小锋, 张洋鹏, 张兹瑜. Pb-Bi腐蚀Si增强型铁素体/马氏体钢和奥氏体不锈钢的研究进展[J]. 金属学报, 2023, 59(4): 502-512.
[7] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[8] 夏大海, 计元元, 毛英畅, 邓成满, 祝钰, 胡文彬. 2024铝合金在模拟动态海水/大气界面环境中的局部腐蚀机制[J]. 金属学报, 2023, 59(2): 297-308.
[9] 周小宾, 赵占山, 汪万行, 徐建国, 岳强. 渣-金界面气泡夹带行为数值物理模拟[J]. 金属学报, 2023, 59(11): 1523-1532.
[10] 陈学双, 黄兴民, 刘俊杰, 吕超, 张娟. 一种含富锰偏析带的热轧临界退火中锰钢的组织调控及强化机制[J]. 金属学报, 2023, 59(11): 1448-1456.
[11] 姜江, 郝世杰, 姜大强, 郭方敏, 任洋, 崔立山. NiTi-Nb原位复合材料的准线性超弹性变形[J]. 金属学报, 2023, 59(11): 1419-1427.
[12] 侯旭儒, 赵琳, 任淑彬, 彭云, 马成勇, 田志凌. 热输入对电弧增材制造船用高强钢组织与力学性能的影响[J]. 金属学报, 2023, 59(10): 1311-1323.
[13] 沈莹莹, 张国兴, 贾清, 王玉敏, 崔玉友, 杨锐. SiCf/TiAl复合材料界面反应及热稳定性[J]. 金属学报, 2022, 58(9): 1150-1158.
[14] 李小琳, 刘林锡, 李雅婷, 杨佳伟, 邓想涛, 王海丰. 单一 MX 型析出相强化马氏体耐热钢力学性能及蠕变行为[J]. 金属学报, 2022, 58(9): 1199-1207.
[15] 宋庆忠, 潜坤, 舒磊, 陈波, 马颖澈, 刘奎. 镍基高温合金K417G与氧化物耐火材料的界面反应[J]. 金属学报, 2022, 58(7): 868-882.