Please wait a minute...
金属学报  1989, Vol. 25 Issue (2): 45-50    
  论文 本期目录 | 过刊浏览 |
单晶铌的循环变形研究
林栋梁;吴建生;陈贤芬
上海交通大学材料科学及工程系;教授;上海交通大学材料科学及工程研究所;上海交通大学材料科学及工程系;上海交通大学材料科学及工程系
CYCLIC DEFORMATION OF Nb SINGLE CRYSTALS
LIN Dongliang;WU Jiansheng;CHEN Xianfen T. L. Lin Shanghai Jiaotong University
引用本文:

林栋梁;吴建生;陈贤芬. 单晶铌的循环变形研究[J]. 金属学报, 1989, 25(2): 45-50.
, , . CYCLIC DEFORMATION OF Nb SINGLE CRYSTALS[J]. Acta Metall Sin, 1989, 25(2): 45-50.

全文: PDF(1625 KB)  
摘要: 本文系统地研究了Nb单晶循环变形的应力-应变关系及位错组态。和单向变形相比较,单晶在循环变形后都有应力不对称现象,拉伸时的应力小于压缩时的应力。循环硬化曲线可以分成三个阶段:初始阶段、快速硬化阶段和饱和阶段。初始阶段位错组态为密集的位错网络和碎块状的位错圈。快速硬化阶段出现条带状的位错缠结。饱和阶段的位错组态为条带和条带之间的螺位错,塑性变形主要通过条带间的螺位错往复运动来实现。
关键词 铌单晶循环变形位错    
Abstract:Nb single crystals of both [321] and [110] orientations have been cy-clicly deformed in tension-compression at constant strain rate 8×10~(-4)s~(-1) over arange of plastic strain amplitudes between 10~(-3) and 10~(-4). The cyclic hardening, thechanges in shape of crystals and the asymmetry of stress have been studied. Thehardening curve can be divided into three stages, i. e. first, rapid-hardening andsaturated stage. In the first stage of cyclic hardening curve dominant features of dislocationconfigurations are high density networks and debris loops. In the rapid-hardeningstage the main feature is the formation of dislocation bundles. In the saturateda well defined bundle structure fully develops and between them it is filled withonly screw disloca tions and the imposed strain is accommodated mainly bythe motion of screw dislocations travelling to and from between the bundles.Three-dimention cell, two-dimention cell or bundle structures are summarized as thesaturated structures of bcc metals.
Key wordsNb single crystal    cyclic deformation    dislocation
收稿日期: 1989-02-18     
1 Laird C. Fatigue and Microstructure, Ohio: American Society for Metals, 1978; 149
2 Mughrabi H. Mater Sci Eng, 1978; 33: 207
3 Mughrabi H, Herz K, Stark X. Int J Fract. 1981; 17: 193
4 Mughrabi H, Herz K, Stark X. Acta Metall. 1976; 24: 659
5 肖德傅,李长英,应铁如,黄春祥,陈贤芬,吴建生,林栋梁.上海金属(有色分册),1983;4(2) :11
6 Chang L N, Taylor G, Christian J W. Acta Metall, 1983; 31: 37
7 Vitek V. Cryst Lattice Defects, 1974; 5: 1
8 Mori H, Tokuwame M, Miyazaki T. Philos Mag, A, 1979; 40: 409
9 Kuhlmann-Wilskorf D. Phys Status Solidi, (a) 1978; 47: 639
[1] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[2] 韩卫忠, 卢岩, 张雨衡. 体心立方金属韧脆转变机制研究进展[J]. 金属学报, 2023, 59(3): 335-348.
[3] 韩冬, 张炎杰, 李小武. 短程有序对高层错能Cu-Mn合金拉-拉疲劳变形行为及损伤机制的影响[J]. 金属学报, 2022, 58(9): 1208-1220.
[4] 田妮, 石旭, 刘威, 刘春城, 赵刚, 左良. 预拉伸变形对欠时效7N01铝合金板材疲劳断裂的影响[J]. 金属学报, 2022, 58(6): 760-770.
[5] 郑士建, 闫哲, 孔祥飞, 张瑞丰. 纳米金属层状材料强塑性的界面调控[J]. 金属学报, 2022, 58(6): 709-725.
[6] 高川, 邓运来, 王冯权, 郭晓斌. 蠕变时效对欠时效7075铝合金力学性能的影响[J]. 金属学报, 2022, 58(6): 746-759.
[7] 武晓雷, 朱运田. 异构金属材料及其塑性变形与应变硬化[J]. 金属学报, 2022, 58(11): 1349-1359.
[8] 安旭东, 朱特, 王茜茜, 宋亚敏, 刘进洋, 张鹏, 张钊宽, 万明攀, 曹兴忠. 奥氏体316不锈钢中位错与氢的相互作用机理[J]. 金属学报, 2021, 57(7): 913-920.
[9] 兰亮云, 孔祥伟, 邱春林, 杜林秀. 基于多尺度力学实验的氢脆现象的最新研究进展[J]. 金属学报, 2021, 57(7): 845-859.
[10] 石增敏, 梁静宇, 李箭, 王毛球, 方子帆. 板条马氏体拉伸塑性行为的原位分析[J]. 金属学报, 2021, 57(5): 595-604.
[11] 梁晋洁, 高宁, 李玉红. 体心立方Fe中微裂纹与间隙型位错环相互作用的分子动力学模拟[J]. 金属学报, 2020, 56(9): 1286-1294.
[12] 李美霖, 李赛毅. 金属Mg二阶锥面<c+a>刃位错运动特性的分子动力学模拟[J]. 金属学报, 2020, 56(5): 795-800.
[13] 李亦庄,黄明欣. 基于中子衍射和同步辐射X射线衍射的TWIP钢位错密度计算方法[J]. 金属学报, 2020, 56(4): 487-493.
[14] 许擎栋, 李克俭, 蔡志鹏, 吴瑶. 脉冲磁场对TC4钛合金微观结构的影响及其机理探究[J]. 金属学报, 2019, 55(4): 489-495.
[15] 高钰璧, 丁雨田, 陈建军, 许佳玉, 马元俊, 张东. 挤压态GH3625合金冷变形过程中的组织和织构演变[J]. 金属学报, 2019, 55(4): 547-554.